DB101S_THRU_DB107S (DB-S)

MB05S
WILLAS
THRU
MB10S
SINGLE-PHASE GLASS PASSIVATED SILICON SURFACE MOUNT BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 0.8 Ampere
FEATURES
MD-S
* Surge overload rating - 30 amperes peak
* Ideal for printed circuit board
* Reliable low cost construction utilizing molded
1
2
3
4
* Glass passivated device
.04 (1.00) MAX.
.082(0.9)
MECHANICAL DATA
.157(4.00)
.145(3.60)
.275(7.00)
.260(6.60)
* RoHS product for packing code suffix "G"
Halogen free product for packing code suffix "H"
.020(0.5)
.108(2.74)
.092(2.34)
Case: Molded plastic, MD-S
Epoxy: Device has UL flammability classification 94V-O
.014(0.35)
.006(0.15)
.193(4.9)
.177(4.5)
Terminals: MIL-STD-202E method 208c guaranteed
Mounting position: Any
Weight: Approximated 0.134 gram.
.106(2.7)
.901(2.3)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase half wave, 60Hz, resistive of inductive load.
For capacitive load, derate current by 20%
SYMBOL
R A T IN G S
Marking Code
MB05S
MB1S
MB2S
MB4S
MB6S
MB8S
MB10S
MB05S
MB1S
MB2S
MB4S
MB6S
MB8S
MB10S
UNIT
Maximum Recurrent Peak Reverse Voltage
VRRM
VRMS
50
35
100
70
200
140
400
280
600
420
800
560
1000
700
Volts
Maximum RMS Voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum DC Blocking Voltage
Volts
IO
0.8
Amps
IFSM
30
Amps
85
13
℃/W
Operating Temperature Range
RΘJA
CJ
TJ
Storage Temperature Range
TSTG
-55 to +150
-55 to +150
℃
℃
Maximum Average Forward Rectified Current
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 2)
Typical Junction Capacitance (Note 1)
SYMBOL
CHARACTERISTICS
VF
Maximum Forward Voltage at 0.8A DC
Maximum Average Reverse Current at
@TA =25℃
Rated DC Blocking Voltage
@TA =125℃
IR
MB05S
MB1S
MB2S
MB4S
1.05
10
0.5
PF
MB6S
MB8S
MB10S
UNIT
Volts
uAmps
mAmps
NOTES:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- Thermal Resistance From Junction to Ambient.
2012-11
WILLAS ELECTRONIC CORP.
WILLAS
MB05S
THRU
MB10S
SINGLE-PHASE GLASS PASSIVATED SILICON SURFACE MOUNT BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 0.8 Ampere
RATING AND CHARACTERISTIC CURVES ( MB05S THRU MB10S )
POWER DISSIPATION
2.4
2
pulse test
per one diode
1
0.5
0
TL=150 C
0
TL=25 C
(TYP)
(TYP)
0.2
0.1
0.05
0
0.2
sine wave
0
POWER DISSIPATION PF(W)
INSTANTANEOUS FORWARD CURRENT, (A)
TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
0.4
0.6
0.8
1
2
1.6
1.2
0.8
0.4
0
1.2
INSTANTANEOUS FORWARD VOLTAGE, (V)
Tj=150 C
0
0.6
0.8
1
TYPICAL FORWARD CURRENT
DERATING CURVE
1.4
35
AVERAGE FORWARD CURRENT, (A)
sine wave
IFSM
PEAK FORWARD SURGE CURRENT, (A)
0.4
AVERAGE RECTIFIED FORWARD CURRENT, Io (A)
SURGE FORWARD CURRENT CAPABILITY
30
0
25
8.3ms 8.3ms
1 cycle
20
non-repetitive
0
Tj=25 C
15
10
5
0
1
2
5
10
20
NUMBER OF CYCLE
2012-11
0.2
50
100
sine wave
R-load
free in air
1.2
1.0
0.8
on aluminum
substrate
0.6
0.4
on glass
-epoxy substrate
0.2
0
0
40
80
120
160
AMBIENT TEMPERATURE, ( C )
o
WILLAS ELECTRONIC CORP.
WILLAS
MB05S
THRU
SINGLE-PHASE GLASS PASSIVATED SILICON SURFACE MOUNT BRIDGE RECTIFIER
MB10S
VOLTAGE RANGE 50 to 1000 Volts CURRENT 0.8 Ampere
Ordering Information: Device PN Part Number ‐T(1)G(2)‐WS Note: (1) Packing code, Tape & Reel Packing Packing Tape&Reel: 3 Kpcs/Reel (2) RoHS product for packing code suffix ”G”;Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life‐saving implant or other applications intended for life‐sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2012-11
WILLAS ELECTRONIC CORP.