DC/DC Converters TEQ 100WIR Series, 100 Watt CB Features ◆ High power block with excellent Scheme UL 60950-1 UL 508 thermal convection ◆ Operating temperature -40°C to +85° without derating ◆ Increased shock & vibration resistance ◆ Ultra wide 4:1 input voltage range u EN 50155 approval for railway applications ◆ Excellent efficiency up to 90% ◆ Input filter meet EN 55022, class A ◆ I/O isolation 2250 VDC ◆ Under voltage lock-out circuit ◆ Soft start ◆ Input protection filter The TEQ-100WIR Series is a family of isolated high performance dc-dc converter modules with ultra-wide 4:1 input voltage ranges which come in a rugged, sealed metal case. These converters are suitable for a wide range of applications, but the product is designed particularly also for industrial applications where often no PCB mounting is possible but the module has to be mounted on a chassis. A very high efficiency and the overall heatsink construction allows an operating temperature up to +85°C with natural convection cooling without power derating and up to +95ºC with power derating. Further features include output voltage trimming, Remote On/Off and under voltage lockout. The ultra wide input voltage range and reverse input voltage protection make these converters also an interesting solution for battery operated systems. Models Order code* Input voltage TEQ 100-2412WIR TEQ 100-2415WIR 9 – 36 VDC TEQ 100-2416WIR (24 VDC nominal) Output voltage Output current max. Efficiency typ. 12 VDC (9.6 – 13.2) 8.4 A 90 % 24 VDC (19.2 – 26.4) 4.2 A 90 % 28 VDC (22.4 – 30.8) 3.6 A 90 % TEQ 100-2418WIR 48 VDC (38.4 – 52.8) 2.1 A 90 % TEQ 100-4812WIR 12 VDC (9.6 – 13.2) 8.4 A 90 % 24 VDC (19.2 – 26.4) 4.2 A 90 % TEQ 100-4815WIR 18 – 75 VDC TEQ 100-4816WIR (48 VDC nominal) TEQ 100-4818WIR TEQ 100-7212WIR TEQ 100-7215WIR 43 – 160 VDC TEQ 100-7216WIR (110 VDC nominal) TEQ 100-7218WIR http://www.tracopower.com 28 VDC (22.4 – 30.8) 3.6 A 90 % 48 VDC (38.4 – 52.8) 2.1 A 90 % 12 VDC (9.6 – 13.2) 8.4 A 89 % 24 VDC (19.2 – 26.4) 4.2 A 90 % 28 VDC (22.4 – 30.8) 3.6 A 90 % 48 VDC (38.4 – 52.8) 2.1 A 90 % Page 1 of 4 DC/DC Converters TEQ 100WIR Series 100 Watt Input Specifications Input current at no load 24 Vin models: 25 mA typ. 48 Vin models: 20 mA typ. 110 Vin models: 10 mA typ. Start-up voltage 24 Vin models: 9.0 VDC (or lower) 48 Vin models: 18.0 VDC (or lower) 110 Vin models: 43.0 VDC (or lower) Under voltage shut down (lock-out circuit) 24 Vin models: 7.3 VDC min. 48 Vin models: 15.8 VDC min. 110 Vin models: 34.5 VDC min Surge voltage (1 sec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. 110 Vin models: 185 V max. Conducted noise EN 55022 class A EMC immunity EN 50121-3-2 – ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A – Radiated immunity EN 61000-4-3, 20 V/m, perf. criteria A – Fast transient / surge EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV, perf. criteria A EN 61000-4-5, ±2 kV, perf. criteria A – Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A – Railway immunity EN 50155 Reverse voltage protection parallel diode Output Specifications Voltage set accuracy ±1 % Output voltage adjustment +10 % / –20 % Regulation – Input variation Vin min. to Vin max. 0.1 % max. – Load variation (0 – 100 %) 0.1 % max. Temperature coefficient ±0.02 %/K Minimum load not required Remote sense up to Vout nom. +10% Ripple and noise (20 MHz Bandwidth) 12 VDC models: 125 mVpk-pk max. 24 & 28 VDC models: 250 mVpk-pk max. 48 VDC models: 350 mVpk-pk max. http://www.tracopower.com Page 2 of 4 DC/DC Converters TEQ 100WIR Series 100 Watt Output Specifications Start up time (nominal Vin and constant resistive load) 75 ms typ. (at power On or remote On) Transient response (25% load step change) 250 µs max. Output current limitation at 120 -150 % of Iout max. Over voltage protection at 115 -130 % of Vout nom. Short circuit protection hiccup, automatic recovery Capacitive load 12 24 28 48 VDC VDC VDC VDC models: models: models: models: 7‘000 µF max. 1‘750 µF max. 1‘280 µF max. 430 µF max. General Specifications Temperature ranges – Operating –40°C to +105°C (up to +85°C w/o derating) – Storage –40°C to +105°C Thermal impedance 1.45°C/W Derating See derating graph below Over temperature protection at 120°C Thermal shock acc. MIL-STD-810F Shock & Vibration acc. EN61373, MIL-STD-810F Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)TBD Isolation voltage (60sec.) – Input/Output 2’250 VDC (basic insulation) – Input/Case 1’600 VDC Isolation resistance – Input/Output (500 VDC) >1 GOhm min. Switching frequency 24 & 48 Vin models: 250 kHz typ. (puls width modulation) 110 Vin models: 300 kHz typ. (puls width modulation) Safety standards – CB test certificate IEC/EN 60950-1 (ed. 2), EN 60950-1:2006/ A11:2009/A1:2010/A12:2011/A2:2013 – CSA certificate of compliance UL 508, CSA C22.2 No. 107.1-01 – UL online certification E188913, QQGQ2 UL 60950-1 2nd ed. +Am1 – Railway immunityEN50155 – Flamability identified acc. EN45545-2 – Certification documents www.tracopower.com/overview/teq100wir Remote On/Off – positive logic (standard) – On: – Off: – negative logic (option -N)– On: – Off: – Off idle current: Environmental compliance Temperature derating 3 to 12 VDC or open circuit 0 to 1.2 VDC or short circuit terminal 1 and 4 0 to 1.2 VDC or short circuit terminal 1 and 4 3 to 12 VDC or open circuit 3 mA – Reach document www.tracopower.com/overview/teq100wir – RoHS RoHS directive 2011/65/EU 120 OUTPUT POWER(%) 100 80 60 40 20 Natural convection (20LFM) 0 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURE,TA(ºC) 100 120 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters TEQ 100WIR Series 100 Watt Physical Specifications Casing material aluminium Potting material silicone (UL94V-0 rated) Base material FR4 Weight 800 g (28.22oz) Dimensions TEQ 100WIR module: 103.2 (4.06) 74.2 (2.92) 79.1 (3.11) 76.2 (3.0) 88.9 (3.50) 87.6 (3.45) 3.2 (0.13) Connection Weight: 800 g (28.22 oz) Terminal – Vin 2 – Vin 3 NC 4 Ctrl (Remote On/Off) 5 + Vin 6 + Vin 7 – Vout 8 – Vout 9 – Sense* 10 + Sense* 11 + Vout 12 + Vout DIN-Rail clip: Order code: TEP-MK1 45.0 (1.77) 8.7 (0.34) 50.0 (1.97) 1 *Sense line to be connected to the output either at the module or at the load under regard of polarity. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com http://www.tracopower.com Rev. June 22. 2015 Page 4 of 4