05368 PAM24DF1605 Only One Name Means ProTek’Tion™ emi filter/tvs array Description The PAM24DF1605 is a DFN-16, 8 line low pass filter array with integrated TVS diodes. The PAM24DF1605 is designed to suppress unwanted EMI/RFI signals and provide ESD protection for automotive applications. With a desired cutoff frequency of 110MHz, the PAM24DF1605P provides good EMI/RFI attenuation better than 35dB in the 800MHz - 3GHz bandwidth. This blocks RF noises from GSM, DCS or Bluetooth which can affect the baseband chipset and other blocks. Coupled with the integrated TVS diodes, this device is able to meet IEC 61000-42 (ESD) and 61000-4-4 (EFT) immunity requirements. DFN-16 package Features applications • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • ESD Protection > 25 kilovolts • EMI Filtering/TVS Low Pass Filters • >25dB Attenuation from 800MHz to 3GHz • Protects up to 8 Data Lines • RoHS Compliant • REACH Compliant • Automotive Applications Mechanical characteristics • Molded JEDEC DFN-16SLP (Low Profile) Package • Approximate Weight: 7 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 12mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 circuit diagram & PIN CONFIGURATION 1 2 3 4 5 6 7 8 13 12 11 BOTTOM VIEW 10 9 For Each Line I/On 100 Ohm I/On GND 15pF 15pF GND 16 I/O connected from pins 1-16, 2-15, 3-14, 5-12, 6-11, 7-10 and 8-9. 05368.R3 6/13 Page 1 15 14 www.protekdevices.com 05368 PAM24DF1605 Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Operating Temperature SYMBOL VALUE UNITS TA -40 to 85 °C Storage Temperature TSTG -55 to 150 °C DC Power per Resistor P 100 mW Typical Resistance ±20% R 100 OHMs Soldering Temperature for 10 seconds TL 265 °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER PAM24DF1605 05368.R3 6/13 device marking 168S RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM reverse LEAKAGE CURRENT typical forward voltage VWM VOLTS @ 1mA V(BR) VOLTS @ 3V ID µA @ 10mA VF VOLTS @ 800-3000 MHz dB fC MHz @2.5V, 1MHz C pF 5.0 6.0 0.1 0.8 25 110 30 Page 2 MINIMUM cut-off TYPICAL ATTENUATION frequency CAPACITANCE (50 ohms i/o) zero bias www.protekdevices.com 05368 PAM24DF1605 Only One Name Means ProTek’Tion™ typical device characteristics figure 1 insertion loss -5 2.5 Volts -15 Gain - dB 0 Volts -25 -35 0.1 1 1000 100000 figure 2 resistance vs temperature (Normalized to Resistance at 25°C) 1.10 Normalized Resistance 10 100 Frequency - MHz 1.06 1.02 0.98 0.94 0.90 -40 05368.R3 6/13 -20 0 20 40 Temperature - °C Page 3 60 80 100 www.protekdevices.com 05368 PAM24DF1605 Only One Name Means ProTek’Tion™ typical device characteristics figure 3 capacitance vs reverse voltage (Normalized to Capacitance at 2.5V DC @ 25°C) Cj - Capactiance(Normalized) - pF 1.6 1.2 0.8 0.4 0 0 2 4 VR - Reverse Voltage - Volts 6 figure 4 overshoot & clamping voltage (Through the Filter) 5 Volts per Division 35 25 15 5 -5 ESD Test Pulse - 5 kilovolt, 1/30ns (Waveshape) 05368.R3 6/13 Page 4 www.protekdevices.com 05368 PAM24DF1605 Only One Name Means ProTek’Tion™ DFN-16SLP(low profile) package information P1 outline dimensions dim millimeters inches min max min max P1 3.20 3.40 0.126 0.134 P2 1.25 1.45 0.049 0.057 P3 0.45 0.60 0.018 0.024 L1 0.19 0.28 0.007 0.011 L2 0.23 0.30 0.009 0.012 L3 0.13 0.18 0.005 0.007 p 0.40 BSC P2 Pin 1 Reference TOP VIEW L3 0.016 BSC G1 2.70 2.90 0.106 0.114 G2 0.35 0.45 0.014 0.018 G4 0.25 0.35 0.010 0.014 A1 0.00 0.05 0.00 0.002 K 0.33 0.40 0.013 0.016 NOTEs 1. Controlling dimension: millimeters. 2. Dimensioning and tolerances per ANSI Y14.M, 1985. 3. Dimension L1 applies to terminal and is measured between 0.25 and 0.30mm from terminal. 4. Coplanarity applies to the exposed pad as well as the terminals. SIDE VIEW L2 millimeters inches min max min max A 1.56 1.76 0.061 0.069 B 2.10 2.30 0.083 0.091 C 0.51 0.61 0.020 0.024 D 0.40 BSC P3 A1 p L1 1 8 G2 K 10 9 G4 G1 BOTTOM VIEW pad layout dimensions dim END VIEW C E F A 0.016 BSC E 0.25 0.35 0.010 0.014 F 0.20 0.30 0.008 0.012 D B NOTES 1. Controlling dimension: millimeters. 05368.R3 6/13 Page 5 www.protekdevices.com 05368 PAM24DF1605 Only One Name Means ProTek’Tion™ TAPE AND REEL D t Top Cover Tape P2 Pin 1 10 Pitches Cumulative Tolerance on tape ± 0.2 E P0 A0 K0 F W B0 P User Direction of Feed specifications Reel Dia. Tape Width A0 B0 178mm (7”) 12mm 1.60 ± 0.10 3.6 ± 0.10 K0 D E F 0.60 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 W P0 P2 P tmax 12.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.30 ± 0.05 Notes 1. 2. 3. 4. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and polarity dot. Package outline, pad layout and tape specifications per document number 06081.R0 3/11. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty PAM24DF1605-NQ N/A -T73 3,000 7” n/a This device is only available in a Lead-Free configuration. Suffix -NQ = This is a commercial grade device and is not qualified to the AEC-Q101 standard. Please contact customer service for more information. 05368.R3 6/13 Page 6 www.protekdevices.com 05368 PAM24DF1605 Only One Name Means ProTek’Tion™ company information COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2012 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05368.R3 6/13 Page 7 www.protekdevices.com