05251 EM4DLP-100L Only One Name Means ProTek’Tion™ EMI FILTER/TVS ARRAY DESCRIPTION The EM4DLP-100L is a 2mm square DFN-8, 4 line low pass filter array with integrated TVS diodes. The EM4DLP-100L is designed to suppress unwanted EMI/RFI signals and provide ESD protection for high-speed data interfaces such as LCD displays and camera imagers for SMART phones. With a desired cutoff frequency of 150MHz, the EM4DLP-100L provides good EMI/RFI attenuation better than 35dB in the 800MHz - 3GHz bandwidth. This blocks RF noises from GSM, DCS or Bluetooth which can affect the baseband chipset and other blocks. Coupled with the integrated TVS diodes, this device is able to meet IEC 61000-4-2 (ESD) and 61000-4-4 (EFT) immunity requirements. DFN-8 PACKAGE FEATURES APPLICATIONS • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • ESD Protection > 25 kilovolts • EMI Filtering/TVS Low Pass Filters • >25dB Attenuation from 800MHz to 3GHz • Protects up to 4 Data Lines • RoHS Compliant • REACH Compliant • SMART Phones • LCD Display Panel • Portable Electronics • SMART Cards MECHANICAL CHARACTERISTICS • Molded JEDEC DFN-8LP (Low Profile) Package • Approximate Weight: 2 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 CIRCUIT DIAGRAM & PIN CONFIGURATION For Each Line I/O 1 100 Ohm 2 3 4 6 5 I/O 10pF 10pF GND GND I/O connected from pins 1-8, 2-7, 3-6 and 4-5. 8 7 BOTTOM VIEW 05251.R6 4/15 Page 1 www.protekdevices.com 05251 EM4DLP-100L Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Operating Temperature TA -40 to 85 °C Storage Temperature TSTG -55 to 150 °C DC Power per Resistor P 400 mW Typical Resistance ±20% R 100 OHMs Soldering Temperature for 10 seconds TL 265 °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER EM4DLP-100L DEVICE MARKING 4L RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT TYPICAL FORWARD VOLTAGE MINIMUM CUT-OFF TYPICAL ATTENUATION FREQUENCY CAPACITANCE (50 OHMS I/O) (Note 1) ZERO BIAS VWM VOLTS @ 1mA V(BR) VOLTS @ 3V ID µA @ 10mA VF VOLTS @ 800-3000 MHz dB fC MHz @2.5V, 1MHz C pF 5.0 6.0 0.1 0.8 25 150 20 NOTES 1. 30pF @ 0V, 1MHz, ± 20% tolerance. 05251.R6 4/15 Page 2 www.protekdevices.com 05251 EM4DLP-100L Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS FIGURE 1 TYPICAL FILTER PERFORMANCE (TA = 25°C, DC Bias = 0V, 50 Ohm Environment) 0 Insertion Loss - dB -10 -20 -30 -40 1 10 1000 10000 FIGURE 2 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25°C) 1.10 Normalized Resistance 100 Frequency - MHz 1.06 1.02 0.98 0.94 0.90 -40 05251.R6 4/15 -20 0 20 40 Temperature - °C Page 3 60 80 100 www.protekdevices.com 05251 EM4DLP-100L Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC @ 25°C) Cj - Capactiance(Normalized) - pF 1.6 1.2 0.8 0.4 0 0 2 4 VR - Reverse Voltage - Volts 6 FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE (Through the Filter) 5 Volts per Division 35 25 15 5 -5 ESD Test Pulse - 5 kilovolt, 1/30ns (Waveshape) 05251.R6 4/15 Page 4 www.protekdevices.com 05251 EM4DLP-100L Only One Name Means ProTek’Tion™ DFN-8LP(LOW PROFILE) PACKAGE INFORMATION OUTLINE DIMENSIONS DIM MILLIMETERS P1 MIN MAX MIN MAX P1 1.90 2.10 0.075 0.083 P2 1.50 1.70 0.059 0.067 P3 0.45 0.55 0.018 0.022 L1 0.23 0.30 0.009 0.012 L2 0.30 0.40 0.012 0.016 L3 0.104 0.18 0.004 0.007 p 0.50 BSC p INCHES P2 L1 L2 G2 TOP VIEW G3 G1 G4 BOTTOM VIEW 0.020 BSC G1 1.15 1.25 0.045 0.050 G2 0.35 0.45 0.014 0.018 G3 0.15 0.25 0.006 0.010 G4 0.25 0.35 0.010 0.014 P3 SIDE VIEW L3 END VIEW NOTES 1. Controlling dimension: millimeters. 2. Dimensioning and tolerances per ANSI Y14.M, 1985. 3. Coplanarity applies to the exposed pad as well as the terminals. G C PAD LAYOUT DIMENSIONS DIM A MILLIMETERS INCHES NOMINAL NOMINAL 2.20 0.087 B 1.90 0.075 C 0.50 BSC 0.020 BSC D 0.50 0.020 E 1.45 0.057 F 0.40 0.016 G 0.35 0.014 H 0.14 0.006 J 0.50 0.020 H J F B E D A NOTES 1. Controlling dimension: millimeters. 05251.R6 4/15 Page 5 www.protekdevices.com 05251 EM4DLP-100L Only One Name Means ProTek’Tion™ TAPE AND REEL D t Top Cover Tape P2 10 Pitches Cumulative Tolerance on tape ± 0.2 E P0 A0 F B0 K0 W Pin 1 P User Direction of Feed SPECIFICATIONS REEL DIA. TAPE WIDTH 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 2.30 ± 0.10 1.90 ± 0.10 0.70 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 tmax 0.25 NOTES 1. 2. 3. 4. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and polarity dot. ORDERING INFORMATION BASE PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE QTY EM4DLP-100L -LF -T73 3,000 7” n/a This device is only available in a Lead-Free configuration. 05251.R6 4/15 Page 6 www.protekdevices.com 05251 EM4DLP-100L Only One Name Means ProTek’Tion™ COMPANY INFORMATION COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Asia Sales: [email protected] Europe Sales: [email protected] U.S. Sales: [email protected] Distributor Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2005 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05251.R6 4/15 Page 7 www.protekdevices.com