05305 SRV05-4LC Only One Name Means ProTek’Tion™ ultra low capacitance steering diode/tvs array Description The SRV05-4LC is a high-powered, ultra low capacitance device for dual USB port and power bus protection. The SRV05-4LC is rated for 5.0V applications, with 500 Watts peak pulse power per line (8/20µs) and an ultra low capacitance of 0.7pF (CJ(SD)). The SRV05-4LC is ideally suited for surge suppression and ESD protection of high-speed data line applications such as video graphic cards, 3G cellular handsets, gigabit Ethernet and SIMM cards. sot-23-6 package The SRV05-4LC combines eight ultra low capacitance steering diodes for up to four individual data or transmission lines and one TVS diode for the power bus. This device is offered in the space-saving SOT-23-6 package configuration. The small package size minimizes the lead inductance, preventing overshoot voltages during high ESD current events. ProTek recommends that the SRV05-4LC be mounted near the connector on the PCB. This device meets and exceeds the ESD requirements of IEC 61000-4-2 and the EFT requirements of IEC 61000-4-4. Features applications • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV • Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGnd) & Level 3(Line-Line0 • 500 Watts Peak Pulse Power per Line(tp = 8/20µs) • ESD Protection > 25 kilovolts • Low Clamping Voltage • Protection for 4 Lines • Ultra Low Capacitance CJ(SD): 0.7pF Typical • RoHS Compliant • REACH Compliant • Gigabit Ethernet • SMART Phones • Portable Electronics • Video Card Interfaces • USB 1.0, USB 2.0 & USB 3.0 • DVI Interfaces mechanical characteristics • Molded JEDEC SOT-23-6 Package • Approximate Weight: 16 milligrams • Lead-Free Nickel Paladium Gold Plating • Solder Reflow Temperature: Nickel-Paladium-Gold: Ni/Pd/Au, 96/3.5/0.5: 260-270°C • Flammability Rating UL 94V-0 • 8mm Tape and Reel per EIA Standard 481 PIN CONFIGURATION 05305.R5 8/13 I/O 1 1 6 I/O 4 GND 2 5 REF I/O 2 3 4 I/O 3 Page 1 www.protekdevices.com 05305 SRV05-4LC Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 SYMBOL VALUE UNITS PPP 500 Watts TL -55 to 150 °C Storage Temperature Operating Temperature TSTG -55 to 150 °C Forward Surge Rating (5ms @ 25°C, IF = 10mA) VF 0.5 Min. - 1.2 Max. Volts ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART device RATED MINIMUM MAXIMUM MAXIMUM MAXIMUM TYPICAL NUMBER marking STAND-OFF BREAKDOWN CLAMPING CLAMPING LEAKAGE CAPACITANCE VOLTAGE VOLTAGE VOLTAGE VOLTAGE CURRENT (Note 2) (Note 1) (Note 1) (Fig. 2) (Fig. 2) (Note 1) (Note 1) (Note 1) @ 1mA @V WM @0V, 1MHz @ i p = 1a @ i p = 5a VWM V(BR) Vc Vc ID C J(SD) VOLTS VOLTS VOLTS VOLTS µA pF SRV05-4LC T5 5.0 6.0 12.0 15.0 5 0.7 MAXIMUM CAPACITANCE I/O to GND MAXIMUM CAPACITANCE I/O to I/O @0V, 1MHz C J(SD) pF @0V, 1MHz C J(SD) pF 1.4 1.0 NOTES 1. Measured from I/O pin to ground. 2. Cj = C(measured)/2. 05305.R5 8/13 Page 2 www.protekdevices.com 05305 SRV05-4LC Only One Name Means ProTek’Tion™ typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 10,000 1,000 500W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs IPP - Peak Pulse Current - % of IPP 10,000 figure 2 pulse wave form 120 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t/(IPP/2) 20 0 05305.R5 8/13 1,000 0 5 10 15 t - Time - µs Page 3 20 25 30 www.protekdevices.com 05305 SRV05-4LC Only One Name Means ProTek’Tion™ typical device characteristics 100 figure 3 power derating curve Peak Pulse Power 8/20µs % Of Rated Power 80 60 40 20 0 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 figure 4 overshoot & clamping voltage 5 Volts per Division 35 25 15 5 -5 ESD Test Pulse - 25 kilovolt, 1/30ns (Waveshape) 05305.R5 8/13 Page 4 www.protekdevices.com 05305 SRV05-4LC Only One Name Means ProTek’Tion™ sot-23-6 package information D outline dimensions dim millimeters E inches min max min max A 2.80 3.05 0.110 0.120 B 1.50 1.75 0.059 0.070 C 0.90 1.30 0.036 0.051 D 0.30 0.40 0.012 0.016 E 0.85 1.05 0.033 0.040 G 0.90 1.45 0.036 0.057 J 0.09 0.20 0.003 0.008 K 2.60 3.00 0.102 0.118 L 0.0 0.15 0.0 0.006 M 0.30 0.60 0.012 0.024 6 4 5 1 3 2 L G C B pad layout dimensions inches NOMINAL NOMINAL A 0.70 0.028 B 1.90 0.074 C 0.95 0.037 D 2.40 0.094 E 1.00 0.039 M A 1. Controlling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.5M, 1985. 3. Dimensions are exclusive of mold flash and metal burrs. millimeters J B NOTES dim 0° - 8° K C E D A NOTES 1. Controlling dimension: inches. 05305.R5 8/13 Page 5 www.protekdevices.com 05305 SRV05-4LC Only One Name Means ProTek’Tion™ TAPE AND REEL P0 P2 D t 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top Cover Tape Pin 1 A0 F W K0 B0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 3.20 ± 0.10 3.20 ± 0.10 1.65 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 tmax 0.25 Notes 1. 2. 3. 4. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and pin one defined by dot on package. Package outline, pad layout and tape specifications per document number 06013.R5 2/11 ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty SRV05-4LC n/a -T7 3,000 7” n/a This device is only available in a Lead-Free configuration. 05305.R5 8/13 Page 6 www.protekdevices.com 05305 SRV05-4LC Only One Name Means ProTek’Tion™ company information COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2008 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05305.R5 8/13 Page 7 www.protekdevices.com