05393 P0201V05 Only One Name Means ProTek’Tion™ ultra low capacitance esd protection component Description The P0201V05 is an ultra low capacitance ESD component designed to protect very high-speed data interfaces. The device has a typical capactiance of only 0.15pF (I/O to GND) and is compatible with the ESD immunity requirements of IEC61000-4-2. Features applications • Compatible with IEC 61000-4-2 (ESD): Air 15kV (Typical), 25kV(Max) • Compatible with IEC 61000-4-2 (ESD): Contact 8kV (Typical), 15kV(Max) • Low Leakage Current: 0.10µA • Fast Response Time • Protects One Bidirectional Line • Ultra Low Capacitance: 0.15 pF (Typical) • RoHS Compliant • REACH Compliant • HDMI • DVI • Display Port • Unified Display Interface (UDI) • Mobile Display Digital Interface (MDDI) • Gigabit Ethernet • USB2.0 & USB3.0 • IEEE 1394 Interface Mechanical characteristics • Molded Ceramic 0201 Package • Approximate Weight: 0.22 milligrams • Lead-Free Plating • Solder Reflow Temperature: • Lead-Free - Sn/Ag/Cu, 96/3.5/0.5: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CONFIGURATION 1 2 05393.R0 11/12 Page 1 www.protekdevices.com 05393 P0201V05 Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS TA -40 to 90 °C TSTG -55 to 125 °C TL 260 °C Operating Temperature Storage Temperature Solder Temperature - 10s ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER RATED STAND-OFF VOLTAGE typical trigger VOLTAGE (Note 1) typical CLAMPING VOLTAGE (Note 1) MAXIMUM LEAKAGE CURRENT (Note 2) TYPICAL CAPACITANCE VWM VOLTS VT VOLTS VC volts @V WM ID µA @0V, 1MHz CJ pF 5.0 400 40.0 0.10 0.15 P0201V05 notes 1. Trigger and Clamping Voltage are measured per IEC 61000-4-2, 8kV contact discharge method. 2. After reliability tests such as high temperature storage, temp cycle, continuous ESD strikes, the maximum leakage current is less than 10µA. figure 1 ESD Clamping test ESD Tester RZ 450 Ohms RG 223/U 50 Ohm Coax CZ 10x Attenuator 4GHz Digital Oscilloscope 50 Ohm DUT (Device Under Test) IEC 61000-4-2 Network CZ = 150pF RZ = 330 Ohms 05393.R0 11/12 Page 2 www.protekdevices.com 05393 P0201V05 Only One Name Means ProTek’Tion™ typical device characteristics figure 2 typical esd waveform IPP 100% 90% 10% t tr = 0.7ns to 1ns 30ns 60ns figure 3 esd wave after clamping 05393.R0 11/12 Page 3 www.protekdevices.com 05393 P0201V05 Only One Name Means ProTek’Tion™ solder reflow information printed circuit board recommendations parameter value Pad Size on PCB 0.275mm Pad Shape Round Pad Definition Non-Solder Mask Defined Pads Solder Mask Opening 0.325mm Round Solder Stencil Thickness 0.150mm Solder Stencil Aperture Opening (Laser cut, 5% tapered walls) 0.330mm Round Solder Paste Type No Clean Pad Protective Finish OSP (Entek Cu Plus 106A) Tolerance - Edge To Corner Ball ±50µm Solder Ball Side Coplanarity ±20µm Maximum Dwell Time Above Liquidous (183°C) 60 seconds Soldering Maximum Temperature 270°C Requirements recommended non-solder mask defined pad illustration Temperature: TP for Lead-Free (Sn/Ag/Cu): 260-270°C TP for Tin-Lead: 240-245°C Preheat time and temperature depends on solder paste and flux activation temperature, component size, weight, surface area and plating. Non-Solder Mask Defined Pad 0.275mm DIA. Solder Mask Opening 0.325mm DIA. Solder Stencil Opening 0.330mm DIA. Maximum Solder Reflow (35-53°C Above Maximum Solder Melt Temp) TP Solder Melt (Maximum Temp) Temperature - °C Ramp-Up Ramp-Down Preheat (Stay Below Flux Activation Temp) 30-60 seconds 05393.R0 11/12 Ramp-Up 15 seconds (Minimize) Page 4 Solder-Time 15-20 seconds Ramp-Down www.protekdevices.com 05393 P0201V05 Only One Name Means ProTek’Tion™ C0201 package information BOTTOM VIEW outline dimensions dim millimeters inches min max min max A 0.50 0.70 0.020 0.028 B 0.25 0.35 0.010 0.014 C 0.25 0.40 0.010 0.016 D 0.10 0.30 0.004 0.012 A NOTEs D 1. Controlling dimension: millimeters. B C SIDE VIEW pad layout dimensions millimeters inches NOM NOM A 0.30 0.012 B 0.25 0.010 C 0.60 0.024 dim B C NOTES 1. Controlling dimension: millimeters A 05393.R0 11/12 Page 5 www.protekdevices.com 05393 P0201V05 Only One Name Means ProTek’Tion™ TAPE AND REEL D T P2 Top Cover Tape 10 Pitches Cumulative Tolerance on tape ± 0.2 E P0 F A0 K0 W B0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 0.75 ± 0.05 1.22 ± 0.10 0.56 ± 0.05 1.55 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 2.00 ± 0.05 tmax 0.25 Notes 1. Dimensions are in millimeters. 2. Surface mount product is taped and reeled in accordance with EIA-481. 3. Suffix - T710 = 7” Reel - 10,000 pieces per 8mm tape. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty P0201V05 N/A -T710 10,000 7” N/A This device is only available in a Lead-Free configuration. 05393.R0 11/12 Page 6 www.protekdevices.com 05393 P0201V05 Only One Name Means ProTek’Tion™ company information COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2012 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05393.R0 11/12 Page 7 www.protekdevices.com