05442 P0603V24 Only One Name Means ProTek’Tion™ ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION The P0603V24 is an ultra low capacitance ESD component designed to protect very high-speed data interfaces. The device has a typical capactiance of only 0.05pF (I/O to GND) and is compatible with the ESD immunity requirements of IEC61000-4-2. FEATURES APPLICATIONS • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV • Low Leakage Current: 0.10µA • Fast Response Time • Protects One Bidirectional Line • Ultra Low Capacitance: 0.05 pF (Typical) • RoHS Compliant • REACH Compliant • HDMI • DVI • Display Port • Unified Display Interface (UDI) • Mobile Display Digital Interface (MDDI) • Gigabit Ethernet • USB2.0 & USB3.0 • IEEE 1394 Interface MECHANICAL CHARACTERISTICS • 0603 Package • Approximate Weight: 0.44 milligrams • Lead-Free Plating • Solder Reflow Temperature: • Lead-Free - Sn/Ag/Cu, 96/3.5/0.5: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CONFIGURATION 1 2 05442.R1 3/14 Page 1 www.protekdevices.com 05442 P0603V24 Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Operating Temperature TA -40 to 90 °C Storage Temperature TSTG -55 to 125 °C TL 260 °C Solder Temperature - 10s ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER RATED STAND-OFF VOLTAGE TYPICAL TRIGGER VOLTAGE (Note 1) TYPICAL CLAMPING VOLTAGE (Note 1) MAXIMUM LEAKAGE CURRENT (Note 2) TYPICAL CAPACITANCE VWM VOLTS VT VOLTS VC VOLTS @V WM ID µA @0V, 1MHz CJ pF 24.0 350 35.0 0.10 0.05 P0603V24 NOTES 1. Trigger and Clamping Voltage are measured per IEC 61000-4-2, 8kV contact discharge method. 2. After reliability tests such as high temperature storage, temp cycle, continuous ESD strikes, the maximum leakage current is less than 10µA. FIGURE 1 ESD CLAMPING TEST ESD Tester RZ 450 Ohms RG 223/U 50 Ohm Coax CZ 30x Attenuator 4GHz Digital Oscilloscope 50 Ohm DUT (Device Under Test) IEC 61000-4-2 Network CZ = 150pF RZ = 330 Ohms 05442.R1 3/14 Page 2 www.protekdevices.com 05442 P0603V24 Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS FIGURE 2 TYPICAL ESD WAVEFORM IPP 100% 90% 10% t tr = 0.7ns to 1ns 30ns 60ns FIGURE 3 8kV POSITIVE CLAMPING WAVEFORM 31.5 Volts per Division 196V Trigger Voltage 19V VClamp 35ns per Division 05442.R1 3/14 Page 3 www.protekdevices.com 05442 P0603V24 Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS 31.5 Volts per Division FIGURE 3 8kV NEGATIVE CLAMPING WAVEFORM -20V VClamp -202V Trigger Voltage 35ns per Division 05442.R1 3/14 Page 4 www.protekdevices.com 05442 P0603V24 Only One Name Means ProTek’Tion™ SOLDER REFLOW INFORMATION PRINTED CIRCUIT BOARD RECOMMENDATIONS PARAMETER VALUE Pad Size on PCB 0.275mm Pad Shape Rectangular Pad Definition Non-Solder Mask Defined Pads Solder Mask Opening 0.325mm Solder Stencil Thickness 0.150mm Solder Stencil Aperture Opening (Laser cut, 5% tapered walls) 0.330mm Solder Paste Type No Clean Pad Protective Finish OSP (Entek Cu Plus 106A) Tolerance - Edge To Corner Ball ±50µm Solder Ball Side Coplanarity ±20µm Maximum Dwell Time Above Liquidous (183°C) 60 seconds Soldering Maximum Temperature 270°C REQUIREMENTS Temperature: TP for Lead-Free (Sn/Ag/Cu): 260-270°C TP for Tin-Lead: 240-245°C Preheat time and temperature depends on solder paste and flux activation temperature, component size, weight, surface area and plating. Maximum Solder Reflow (35-53°C Above Maximum Solder Melt Temp) TP Solder Melt (Maximum Temp) Temperature - °C Ramp-Up Ramp-Down Preheat (Stay Below Flux Activation Temp) 30-60 seconds 05442.R1 3/14 Ramp-Up 15 seconds (Minimize) Page 5 Solder-Time 15-20 seconds Ramp-Down www.protekdevices.com 05442 P0603V24 Only One Name Means ProTek’Tion™ 0603 PACKAGE INFORMATION F OUTLINE DIMENSIONS DIM MILLIMETERS INCHES MIN MAX MIN MAX A 1.45 1.75 0.057 0.079 B 0.70 0.95 0.028 0.037 C 0.43 0.63 0.017 0.025 D 0.00 0.05 0.00 0.002 E 0.125 REF F 0.70 G 1.30 BSC H 0.45 BOTTOM VIEW 0.005 REF 0.80 0.028 A G H 0.031 0.051 BSC 0.55 TOP VIEW 0.018 C 0.022 D B NOTES 1. Controlling dimension: millimeters. E SIDE VIEW PAD LAYOUT DIMENSIONS MILLIMETERS INCHES NOM NOM A 1.35 0.053 B 0.95 0.037 C 0.65 0.026 DIM C A NOTES 1. Controlling dimension: millimeters B 05442.R1 3/14 Page 6 www.protekdevices.com 05442 P0603V24 Only One Name Means ProTek’Tion™ TAPE AND REEL D T P2 Top Cover Tape 10 Pitches Cumulative Tolerance on tape ± 0.2 E P0 F A0 K0 W B0 P User Direction of Feed SPECIFICATIONS REEL DIA. TAPE WIDTH 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 1.10 ± 0.05 1.90 ± 0.10 0.70 ± 0.05 1.55 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 2.00 ± 0.05 tmax 0.25 NOTES 1. Dimensions are in millimeters. 2. Surface mount product is taped and reeled in accordance with EIA-481. 3. Suffix - T75 = 7” Reel - 5,000 pieces per 8mm tape. ORDERING INFORMATION BASE PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE QTY P0603V24 N/A -T75 5,000 7” N/A This device is only available in a Lead-Free configuration. 05442.R1 3/14 Page 7 www.protekdevices.com 05442 P0603V24 Only One Name Means ProTek’Tion™ COMPANY INFORMATION COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Asia Sales: [email protected] Europe Sales: [email protected] U.S. Sales: [email protected] Distributor Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2014 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05442.R1 3/14 Page 8 www.protekdevices.com