WPANT30002-SB 3G Cellular & ISM band Body-mount Antenna Description / Application This is a Penta-band High Efficiency Omni Directional Body-mount Antenna for 3G Cellular & ISM Applications. This Antenna is ideal for mounting on any metal structures / surfaces. Compact Size and Impressive Efficiency are the key features of this Proprietary Design. It comes with a Type-N Female Jack with a Flat edge connector. We specialize in developing customized Antenna solutions. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency Approximate Antenna Impedance [Ω] 824 – 960 MHz 50Ω 1710 – 2170 MHz 50Ω VSWR – Typical* < 2.5:1 < 2.5:1 Peak Gain [dBi] (Typical)* ~ 2 dBi 1.5 to 4 dBi 70 – 85 % 60 – 85 % Linear Near Omni-directional; Also depends on installation Linear Near Omni-directional; Also depends on installation Efficiency [%] (Typical)* Polarization Pattern * Note: RF Performance Metrics recorded with Antenna placed on top of a Metal Box. Mechanical / Environmental Properties Antenna Dimensions Antenna Color Connector Antenna Radome Washer & other outer Metal Parts Main Gasket covering the Base Connector Plating Operating / Storage Temperature Environmental Hazardous Materials Rev: 7.0 Created on: February 24, 2014 3.2’’ X 1.2’’ X 1.2’’ Cool Grey (81mm X 30mm X 30mm) Type-N Female Jack with a Flat edge ABS + Polycarbonate Stainless Steel 1.5mm thick Black 3M Gasket Nickel + Chromium Alloy o o -40 C to +90 C Meets standards for UL 94V-0 RoHS Compliant Created by: MKS Approved by: BP Page | 1 Pictures of the Antenna (antenna itself and as mounted on top of a Metal Box) Rev: 7.0 Created on: February 24, 2014 Created by: MKS Approved by: BP Page | 2 Rev: 7.0 Created on: February 24, 2014 Created by: MKS Approved by: BP Page | 3 Rev: 7.0 Created on: February 24, 2014 Created by: MKS Approved by: BP Page | 4 VSWR of the Antenna (as installed on a Metal Box) Rev: 7.0 Created on: February 24, 2014 Created by: MKS Approved by: BP Page | 5