WPANT40021-C1B 4G / Cellular Embedded Antenna Description / Application This is a high performance embedded antenna for Machine to Machine (M2M) applications such as Electric Meters that operate in 698-960 MHz and 1710-2700 MHz 4G Bands. Standard cable is U.FL & connector is IPX/Hirose Plug. The Antenna is backed by a 3M double stick industry grade tape for easy installation. We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna solutions. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency Approximate Antenna Impedance [Ω] VSWR – Typical* Peak Gain [dBi] (Typical)* Efficiency [%] (Typical)* Polarization Pattern Accepted Power [W] (Max) 698 – 960 MHz 50Ω 1710 – 2700 MHz 50Ω < 3:1 < 3:1 < 3.5 dBi < 4 dBi 40 – 60 % 50 – 70 % Linear Linear Near Omni-directional Near Omni-directional 2 Watts 2 Watts *Note: The above mentioned relevant performance metrics are recorded with the Antenna wrapped around (installed) an electric meter’s surface, inside the upper plastic cap/drum. Since this is an embedded Antenna, performance may vary based on the Antenna placement within a device & also with the variance of the Cable routing. Mechanical / Environmental Properties Antenna Dimensions Antenna Color Cable Connector Double Stick Tape Operating / Storage Temperature UV Tolerance Environmental Hazardous Materials Rev: 1.0 Created on: February 19, 2014 4.66’’ X 1.81’’ X 10 mils Black (118.5mm X 46mm X 0.25mm) 8.5’’ long 1.32mm OD Micro Co-ax / U.FL IPX / Hirose equivalent 15 mils thick 3M 4920 VHB o o -40 C to +90 C 100% UV Resistant Meets standards for UL 94V-0 RoHS Compliant Created by: MKS Approved by: BP Page | 1 Pictures of the Antenna 15 mils 3M 4920 tape Rev: 1.0 Created on: February 19, 2014 Created by: MKS Approved by: BP Page | 2