Pilkor components Metallized Polyester film capacitors PCMT 369 MKT RADIAL LACQUERED CAPACITORS (Dipped Type) - BROWN Pitch 10.0/15.0/22.5/27.5 mm (reduced pitch ; 7.5mm) QUICK REFERENCE DATA Capacitance range (E12 series) 0.01 to 10㎌ Capacitance tolerance ±5%, ±10% Rated voltage VRdc 100 V, 250 V, 400 V, 630 V Climatic category 55/105/56 Temperature range -55℃ ~ +105℃ Reference specification IEC 60384-2 Coating material Qualified in accordance with UL94V-0 FEATURES APPLICATIONS . Low inductive wound cell of Metallized . Blocking and coupling (PETP) film . Bypass and energy reservoir application . Cell protected by epoxy lacquer . Radial leads of solder coated wire . Withstand solvents and rinsing liquids • Please refer to caution and warning at http://www.pilkor.co.kr/download/Introductions.pdf before using these products. 71 Pilkor components Metallized Polyester film capacitors PCMT 369 Ordering Information Wmax Wmax Wmax Wmax Hmax Hmax Hmax 4.8±1.3㎜ F lt Hmax 4.8±1.3㎜ 1.5max 4.8±1.3 Tmax H0 lt H0 P P±1.5 < Figure J > P0 < Figure A > PCMT 369 X P X X XXX < Figure K > Code Pitch(mm) Code D 10.0 2 100V F 15.0 A 250V mini J 22.5 B 400V mini L 27.5 C 630V mini Capacitance Type series dt P0 < Figure F > Available versions Voltage Product (Wmax) Code Packing method C-tol. Lead Figure Lead length & Height Hole to hole ( P0 ) T Loose in box ±10% A lt = 20.0mm(min.) - U Loose in box ± 5% A lt = 20.0mm(min.) 3 Loose in box ±10% J lt = 4.5±0.5mm - 10.0 15.0 22.5 27.5 4 Loose in box ± 5% J lt = 4.5±0.5mm - 10.0 15.0 22.5 27.5 5 Ammo packing ±10% K H0=16.0㎜ 12.7mm 10.0 15.0 22.5 - 6 Ammo packing ± 5% K H0=16.0㎜ 12.7mm 10.0 15.0 22.5 - P Ammo packing ±10% F H0=16.0㎜ 15.0mm 7.5 7.5 - - Q Ammo packing ± 5% F H0=16.0㎜ 15.0mm 7.5 7.5 - - 72 12.5 18.0 26.0 31.0 10.0 15.0 22.5 27.5 10.0 15.0 22.5 27.5 Pitch (P) Pilkor components Metallized Polyester film capacitors VRdc = 100 V PCMT 369 VRac = 63 V 0.39 0.47 0.56 0.68 0.82 1.0 Pitch = 10.0 ± 0.4 mm 12.5 x 10.5 x 5.0 0.5 12.5 x 11.0 x 5.5 0.6 12.5 x 11.5 x 6.0 0.7 12.5 x 12.0 x 6.5 0.8 12.5 x 12.0 x 6.5 0.8 12.5 x 12.0 x 6.5 0.8 Pitch = 15.0 ± 0.4 mm CATALOGUE NUMBER PCMT 369 ..... loose in box lt = 4.5 ± 0.5 mm C-tol. ± 5 % C-tol. ± 10 % dt = 0.6 mm +0.06 / -0.05 PCMT 369D24394 PCMT 369D23394 PCMT 369D24474 PCMT 369D23474 PCMT 369D24564 PCMT 369D23564 PCMT 369D24684 PCMT 369D23684 PCMT 369D24824 PCMT 369D23824 PCMT 369D24105 PCMT 369D23105 dt = 0.6 mm +0.06 / -0.05 0.82 1.0 1.2 1.5 18.0 x 11.0 x 5.5 18.0 x 11.5 x 6.0 18.0 x 12.0 x 6.5 18.0 x 12.5 x 7.5 PCMT 369F24824 PCMT 369F24105 PCMT 369F24125 PCMT 369F24155 Cap (㎌) Wmax x Hmax x Tmax (mm) mass (g) 0.9 1.1 1.3 1.6 Pitch = 15.0 ± 0.4 mm 1.8 2.2 18.0 x 13.5 x 8.0 18.0 x 14.5 x 9.0 dt = 0.8 mm +0.08 / -0.05 1.9 2.2 PCMT 369F24185 PCMT 369F24225 Pitch = 22.5 ± 0.4 mm 2.7 3.3 3.9 4.7 5.6 6.8 26.0 x 15.5 x 6.5 26.0 x 16.0 x 7.5 26.0 x 17.0 x 8.0 26.0 x 17.5 x 9.0 26.0 x 18.5 x 10.0 26.0 x 20.0 x 11.0 PCMT 369F23824 PCMT 369F23105 PCMT 369F23125 PCMT 369F23155 PCMT 369F23185 PCMT 369F23225 dt = 0.8 mm +0.08 / -0.05 2.6 3.0 3.5 4.0 4.6 5.2 PCMT 369J24275 PCMT 369J24335 PCMT 369J24395 PCMT 369J24475 PCMT 369J24565 PCMT 369J24685 73 PCMT 369J23275 PCMT 369J23335 PCMT 369J23395 PCMT 369J23475 PCMT 369J23565 PCMT 369J23685 Pilkor components Metallized Polyester film capacitors VRdc = 250 V Cap. (㎌) PCMT 369 VRac = 160 V Wmax x Hmax x Tmax (mm) Mass (g) Pitch = 10.0 ± 0.4 mm 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 12.5 x 9.5 x 4.5 12.5 x 10.0 x 4.5 12.5 x 10.0 x 4.5 12.5 x 10.0 x 5.0 12.5 x 10.5 x 5.5 12.5 x 11.0 x 6.0 12.5 x 11.5 x 6.5 12.5 x 12.0 x 7.0 12.5 x 13.0 x 8.0 Pitch = 15.0 ± 0.4 mm 0.47 0.56 0.68 18.0 x 11.0 x 6.0 18.0 x 11.5 x 6.5 18.0 x 12.0 x 7.0 PCMT 369FA4474 PCMT 369FA4564 PCMT 369FA4684 Pitch = 15.0 ± 0.4 mm 0.82 1.0 1.2 1.5 Pitch = 27.5 ± 0.4 mm 6.8 31.0 x 22.5 x 13.0 PCMT 369JA3185 PCMT 369JA3225 PCMT 369JA3275 PCMT 369JA3335 PCMT 369JA3395 PCMT 369JA3475 PCMT 369JA3565 PCMT 369JA3665 PCMT 369JA3685 dt = 0.8 mm +0.08 / -0.05 PCMT 369LA4685 74 PCMT 369FA3824 PCMT 369FA3105 PCMT 369FA3125 PCMT 369FA3155 dt = 0.8 mm +0.08 / -0.05 PCMT 369JA4185 PCMT 369JA4225 PCMT 369JA4275 PCMT 369JA4335 PCMT 369JA4395 PCMT 369JA4475 PCMT 369JA4565 PCMT 369JA4665 PCMT 369JA4685 26.0 x 16.0 x 7.0 26.0 x 17.0 x 8.0 26.0 x 17.5 x 9.0 26.0 x 18.5 x 10.0 26.0 x 20.0 x 11.0 26.0 x 21.5 x 12.0 26.0 x 22.5 x 13.0 26.0 x 23.5 x 14.5 26.0 x 24.5 x 15.0 PCMT 369FA3474 PCMT 369FA3564 PCMT 369FA3684 dt = 0.8 mm +0.08 / -0.05 PCMT 369FA4824 PCMT 369FA4105 PCMT 369FA4125 PCMT 369FA4155 18.0 x 12.5 x 7.5 18.0 x 14.0 x 8.0 18.0 x 14.5 x 9.0 18.0 x 15.5 x 10.0 Pitch = 22.5 ± 0.4 mm 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.6 6.8 mini type CATALOGUE NUMBER PCMT 369 ..... loose in box lt = 4.5 ± 0.5 mm C-tol. ± 5 % C-tol. ± 10 % dt = 0.6 mm +0.06 / -0.05 PCMT 369DA3104 PCMT 369DA4104 PCMT 369DA3124 PCMT 369DA4124 PCMT 369DA3154 PCMT 369DA4154 PCMT 369DA3184 PCMT 369DA4184 PCMT 369DA3224 PCMT 369DA4224 PCMT 369DA3274 PCMT 369DA4274 PCMT 369DA3334 PCMT 369DA4334 PCMT 369DA3394 PCMT 369DA4394 PCMT 369DA4474 PCMT 369DA3474 dt = 0.6 mm +0.06 / -0.05 PCMT 369LA3685 Pilkor components Metallized Polyester film capacitors VRdc = 400 V PCMT 369 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 Pitch = 10.0 ± 0.4 mm 12.5 x 9.5 x 4.5 12.5 x 10.0 x 4.5 12.5 x 10.0 x 5.0 12.5 x 10.5 x 5.5 12.5 x 11.0 x 5.5 12.5 x 11.5 x 6.0 12.5 x 12.0 x 6.5 12.5 x 12.0 x 7.5 12.5 x 13.0 x 8.5 Pitch = 15.0 ± 0.4 mm mini type CATALOGUE NUMBER PCMT 369 ..... loose in box lt = 4.5 ±0.5 mm C-tol. ± 5 % C-tol. ± 10 % dt = 0.6 mm +0.06 / -0.05 PCMT 369DB4473 PCMT 369DB3473 PCMT 369DB4563 PCMT 369DB3563 PCMT 369DB4683 PCMT 369DB3683 PCMT 369DB4823 PCMT 369DB3823 PCMT 369DB4104 PCMT 369DB3104 PCMT 369DB4124 PCMT 369DB3124 PCMT 369DB4154 PCMT 369DB3154 PCMT 369DB4184 PCMT 369DB3184 PCMT 369DB4224 PCMT 369DB3224 dt = 0.6 mm +0.06 / -0.05 0.22 0.27 0.33 18.0 x 11.0 x 6.0 18.0 x 11.5 x 6.5 18.0 x 12.5 x 7.0 PCMT 369FB4224 PCMT 369FB4274 PCMT 369FB4334 Cap. (㎌) VRac = 220 V Wmax x Hmax x Tmax (mm) Mass (g) Pitch = 15.0 ± 0.4 mm 0.39 0.47 0.56 0.68 0.82 1.0 Pitch = 22.5 ± 0.4 mm 1.0 1.2 1.5 1.8 2.2 2.7 3.3 26.0 x 17.0 x 8.0 26.0 x 17.5 x 9.5 26.0 x 19.0 x 10.5 26.0 x 20.5 x 11.5 26.0 x 21.5 x 13.5 26.0 x 23.0 x 14.5 26.0 x 25.0 x 16.0 31.0 x 23.5 x 14.5 31.0 x 25.5 x 15.5 31.0 x 27.0 x 17.0 PCMT 369JB3105 PCMT 369JB3125 PCMT 369JB3155 PCMT 369JB3185 PCMT 369JB3225 PCMT 369JB3275 PCMT 369JB3335 dt = 0.8 mm +0.08 / -0.05 PCMT 369LB4335 PCMT 369LB4395 PCMT 369LB4475 75 PCMT 369FB3394 PCMT 369FB3474 PCMT 369FB3564 PCMT 369FB3684 PCMT 369FB3824 PCMT 369FB3105 dt = 0.8 mm +0.08 / -0.05 PCMT 369JB4105 PCMT 369JB4125 PCMT 369JB4155 PCMT 369JB4185 PCMT 369JB4225 PCMT 369JB4275 PCMT 369JB4335 Pitch = 27.5 ± 0.4 mm 3.3 3.9 4.7 dt = 0.8 mm +0.08 / -0.05 PCMT 369FB4394 PCMT 369FB4474 PCMT 369FB4564 PCMT 369FB4684 PCMT 369FB4824 PCMT 369FB4105 18.0 x 13.0 x 8.0 18.0 x 14.0 x 8.5 18.0 x 15.0 x 9.5 18.0 x 15.5 x 10.5 18.0 x 16.5 x 11.5 18.0 x 18.5 x 11.5 PCMT 369FB3224 PCMT 369FB3274 PCMT 369FB3334 PCMT 369LB3335 PCMT 369LB3395 PCMT 369LB3475 Pilkor components Metallized Polyester film capacitors VRdc = 630 V PCMT 369 VRac = 250 V mini type 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 Pitch = 10.0 ± 0.4 mm 12.5 x 9.5 x 4.5 12.5 x 10.0 x 4.5 12.5 x 10.0 x 4.5 12.5 x 10.0 x 4.5 12.5 x 10.0 x 4.5 12.5 x 10.0 x 5.0 12.5 x 10.5 x 5.5 12.5 x 10.5 x 5.5 12.5 x 11.0 x 6.0 12.5 x 11.5 x 6.5 12.5 x 12.0 x 7.0 12.5 x 12.5 x 7.5 12.5 x 13.5 x 8.5 Pitch = 15.0 ± 0.4 mm CATALOGUE NUMBER PCMT 369 ..... loose in box lt = 4.5 ± 0.5 mm C-tol. ± 5 % C-tol. ± 10 % dt = 0.6 mm +0.06 / -0.05 PCMT 369DC3103 PCMT 369DC4103 PCMT 369DC3123 PCMT 369DC4123 PCMT 369DC3153 PCMT 369DC4153 PCMT 369DC3183 PCMT 369DC4183 PCMT 369DC3223 PCMT 369DC4223 PCMT 369DC3273 PCMT 369DC4273 PCMT 369DC3333 PCMT 369DC4333 PCMT 369DC3393 PCMT 369DC4393 PCMT 369DC3473 PCMT 369DC4473 PCMT 369DC3563 PCMT 369DC4563 PCMT 369DC3683 PCMT 369DC4683 PCMT 369DC3823 PCMT 369DC4823 PCMT 369DC3104 PCMT 369DC4104 dt = 0.6 mm +0.06 / -0.05 0.10 0.12 0.15 18.0 x 11.5 x 6.5 18.0 x 12.0 x 7.0 18.0 x 12.5 x 7.5 PCMT 369FC4104 PCMT 369FC4124 PCMT 369FC4154 Cap. (㎌) Wmax x Hmax x Tmax (mm) Mass (g) Pitch = 15.0 ± 0.4 mm 0.18 0.22 0.27 0.33 0.39 18.0 x 13.5 x 8.5 18.0 x 14.5 x 9.0 18.0 x 15.5 x 9.0 18.0 x 16.5 x 10.0 18.0 x 17.5 x 11.0 0.47 0.56 0.68 0.82 1.0 dt = 0.8 mm +0.08 / -0.05 PCMT 369FC4184 PCMT 369FC4224 PCMT 369FC4274 PCMT 369FC4334 PCMT 369FC4394 Pitch = 22.5 ± 0.4 mm 26.0 x 17.5 x 8.5 26.0 x 18.5 x 10.0 26.0 x 20.0 x 11.0 26.0 x 21.0 x 12.0 26.0 x 22.5 x 13.5 PCMT 369FC3184 PCMT 369FC3224 PCMT 369FC3274 PCMT 369FC3334 PCMT 369FC3394 dt = 0.8 mm +0.08 / -0.05 PCMT 369JC4474 PCMT 369JC4564 PCMT 369JC4684 PCMT 369JC4824 PCMT 369JC4105 76 PCMT 369FC3104 PCMT 369FC3124 PCMT 369FC3154 PCMT 369JC3474 PCMT 369JC3564 PCMT 369JC3684 PCMT 369JC3824 PCMT 369JC3105 Pilkor components Metallized Polyester film capacitors PCMT 369 MOUNTING Normal use The capacitors are designed for mounting on printed-wiring boards. The capacitors packed in bandoliers are designed for mounting on printed-wiring boards by means of automatic insertion machines. For detailed specifications refer to chapter packing. Specified method of mounting to withstand vibration and shock In order to withstand vibration and shock tests, it must be ensured that the underside of the crimps are in good contact with the printed-wiring board. - For pitches of 15 mm the capacitors shall be mechanically fixed by the leads. - For larger pitches the capacitors shall be mounted in the same way and the body clamped. RATINGS AND CHARACTERISTICS Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23±1℃, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50±2%. For reference testing, a conditioning period shall be applied over 96±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. 77 Pilkor components Metallized Polyester film capacitors PCMT 369 CHARACTERISTICS • Test Voltage . Test Voltage ( between leads ) : 1.6 x VRdc, 1 min ( cut off current 10mA ) . Test Voltage ( between leads and case ) : 2.0 x VRdc, 1 min • Dissipation Factor Rated voltage 100V 250V Tangent of loss angle ( x 10-4 ) Capacitance 0.39㎌ 0.47㎌ 0.1㎌ 0.47㎌ <C ≤ <C ≤ <C ≤ <C ≤ C ≤ 0.1㎌ < C ≤ C> 400V / 630V 0.47㎌ 6.8㎌ 0.47㎌ 6.8㎌ 0.1㎌ 0.47㎌ 0.47㎌ 1 KHz 10 KHz ≤75 ≤75 ≤75 ≤75 ≤75 ≤75 ≤75 ≤120 ≤120 ≤120 ≤120 ≤120 ≤120 ≤120 • Insulation Resistance The insulation resistance is measured after a voltage has been applied for 1 minute ±5 seconds, the voltage being 100±15V for the 100, 250 and 400 V versions and 500±50V for the 630 V versions. Rated voltage Capacitance R between leads (㏁) RC between leads (sec) 100V C ＞ 0.33㎌ - ＞5000s C ≤ 0.33㎌ ＞30000 - C ＞ 0.33㎌ - ＞10000s 250V / 400V / 630V • Rated Voltage Pulse Load Slope (dV/dt)R The maximum pulse load are value valid for pulse voltage equal to the rated voltage. For lower voltages the given values may be multiplied by VRdc and divided by the applied voltage. Rated pulse load(V/㎲) as a function of lmax Rated voltage lmax = 12.5mm lmax = 18.0mm lmax = 26.0mm lmax = 31.0mm 100V 30 20 20 - 250V 120 45 20 15 400V 170 65 30 25 630V 90 90 35 30 78 Pilkor components Metallized Polyester film capacitors PCMT 369 THE GRAPHS OF CHARACTERISTICS 2 3 ∆ C/C (%) 2 ∆ C/C (%) 1 400V-630V 1 250V 0 0 -1 -2 -1 100V -3 -2 -4 -5 -3 2 3 10 4 10 5 10 Capacitance change at 1kHz as a function of frequency ; f(Hz) typical curve 10 -60 -20 20 60 100 Tamb.(℃) Capacitance as a function of ambient free air temperature, measured at 1kHz, 1V: typical curve 103 1.2 factor dissipation factor(X10-4) 1.0 0.8 102 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 80 100 102 Tamb(C) 105 RC(S) 104 103 102 0 50 Tamb(℃) 103 104 f(Hz) Tangent of loss angle as a function of frequency : typical curve Multiplying factor for DC and AC voltage as a function of temperature -50 101 100 RC-product as a function of ambient free air temperature ; typical curve 79 105 Pilkor components Metallized Polyester film capacitors PCMT 369 MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY 100 103 AC voltage (V) AC voltage (V) 102 10 10 1.5 ㎌(Imax=12.5mm) 1.0 ㎌(Imax=12.5mm) 3.9 ㎌(Imax=12.5mm) 2.2 ㎌(Imax=12.5mm) 10 ㎌(Imax=12.5mm) 10 ㎌(Imax=12.5mm) 1 103 102 1 105 104 f(Hz) 102 106 AC voltage (RMS value) as a function of frequency at Tamb≤85℃ for URdc=100V 103 105 104 f(Hz) 106 AC voltage (RMS value) as a function of frequency at Tamb≤85℃ for URdc=250V 103 103 AC voltage (V) AC voltage (V) 102 102 100 ㎋(Imax=12.5mm) 10 10 100 ㎋(Imax=12.5mm) 220 ㎋(Imax=18.0mm) 220 ㎋(Imax=18.0mm) 1.0 ㎌(Imax=26.0mm) 1.0 ㎌(Imax=26.0mm) 2.2 ㎌(Imax=31.0mm) 1 102 103 104 105 106 1 102 f(Hz) AC voltage (RMS value) as a function of frequency at Tamb≤85℃ for URdc=400V 80 106 103 104 105 AC voltage (RMS value) as a function of frequency at Tamb≤85℃ for URdc=630V 7 f(Hz) 10 Pilkor components Metallized Polyester film capacitors PCMT 369 APPLICATION NOTE These capacitors are not suitable for mains application as across-the-line capacitors without additional protection. To select this capacitor for a certain application, 6 conditions must be checked : 1. The peak voltage (Vp) shall not be greater than the rated DC voltage. 2. The peak-to-peak voltage (Vp-p) shall not be greater than 2√2 times the rated AC voltage to avoid the ionization inception level. 3. The peak current (Ip) shall not exceed the maximum peak current, defined as maximum voltage pulse slope (dV/dt) multiplied by the capacitance. Ip max. = C (dV/dt) max Or the voltage pulse slope shall not exceed the rated voltage pulse slope. If the pulse voltage is Lower than the rated voltage, the values of the table may be multiplied by VRdc and divided by the applied voltage. 4. The dissipated power shall not be greater than the maximum permissible power dissipation stated above. 5. The free air ambient temperature for the capacitor is not exceeding the category temperature. 6. Since all metallized film capacitors have an intrinsically active flammability risk, it is recommended that these capacitors should only be used in circuits where the power can be limited to less than 5W to the capacitor should a failure occur. PRODUCT MARKING The capacitors are marked in black ink on the side with the following information : . Rated capacitance in code according to IEC 60062(224) . Tolerance on rated capacitance : J = ±5 % , K = ±10 % . Rated DC voltage(250) . Product Type (P369) . Code for dielectric material(MKT) . Batch number code(1341101) Example of marking 224 J 250 P369 MKT 1341101 224 J 250. P369 MKT 1341101 81