HG4117 Automotive Subminiature PCB Power Relay FEATURES 15A continuous current capacity Six different contact forms Available with open, dust cover and sealed version Automotive-oriented design TYPICAL AUTOMOTIVE APPLICATIONS Flasher Interval wiper control Fuel pump control Anti-theft alarm system Automatic mirror adjustment Air conditioning Door lock ABS Belt tension adjustment Power window CONTACT DATA 1 Form A 1 Form B Form (H) Max. Switching Current 60A (S:100A) 20A Make Break Material Initial Contact Resistance Max. Switching Voltage Max. Continuous Current Min. Load Mechanical Service Life Electrical 15A (D) 12A 10A 10A 1 Form C (Z) 1 Form U 1 Form V (SH) (SD) NO NC 60A 2 x 40A 12A 2 x 8A (S:70A) (S:100A) 2 x 20A 2 x 7A 20A 10A AgNi0.15, AgSnOInO 100 mΩ max. at 0.1A, 6VDC See curve, current dependent 15A 10A 2 x 10A 2 x 7A 0.5A, 5VDC 107 ops. 5 2 x 10 ops, see Note 4 1 Form W (SZ) NO NC 2 x 30A 2 x 5A (S:50A) 2 x 15A 2 x 5A 2 x 7A 2 x 5A COIL DATA Coil Voltage Code Nominal Voltage ( VDC) Resistance (Ω) ±10% 006 012 024 6 12 24 28 130 520 Allowable Voltage ( VDC) Must Operate Voltage max. ( VDC) A, B, C, U, V 3.75 7.50 15.00 W 4.5 9.0 18.0 8 16 31 Must Release Voltage min. ( VDC) B, V 0.35 0.70 1.40 A, C, U, W 0.7 1.4 2.8 CHARACTERISTICS Operate Time Release Time Insulation Resistance Dielectric Strength Shock Resistance Vibration Resistance Drop Resistance Power Consumption Ambient Temperature Weight 3 ms. typical 1.5 ms. typical 100 MΩ, at 500 VDC, 50%RH 500 Vrms, 1 min. 10 g, 11ms. DA 1.5mm, 20 - 200 Hz, functional 1 M height drop on concrete in final enclosure 1.1 W, approx. -40ºC to 85ºC operating; -40ºC to 155ºC storage Open: 8 g; Covered: 12 g, approx. ORDERING DESIGNATION Example: HG4117 / 012 Model Coil Voltage code Contact Form H: 1 Form A ; SH: 1 Form U D: 1 Form B ; SD: 1 Form V Z: 1 Form C ; SZ: 1 Form W Version Nil: Open; 1: Sealed; 2: Dust Cover Contact Material Nil: AgNi10; A: AgNi0.15; C: AgCdO; S: AgSnOInO Z 1 A HG4117 1/2 HG4117 REFERENCE CURVES OVERALL DIMENSIONS, MOUNTING HOLES AND WIRING DIAGRAMS (mm) Overall Dimensions Mounting Holes (Bottom View) Wiring Diagrams (Bottom View) NOTES 1. 2. 3. 4. 5. 6. All parameters, unless otherwise specified, are measured at ambient temperature 23ºC. Maximum make current refers to inrush current of lamp load. At ambient temperature of 85ºC, maximum allowable voltage should be reduced to 72%. Electrical life obtained at resistive or inductive load at 10A, 15VDC for A, B, C, U, V forms, 7A, 15VDC for W form, with suitable arc-suppression circuit attached with operating frequency of 1 ops/sec. Custom-made services available with operational quantity. Please let us know your special requirements. Specifications subject to change without prior notice. Willow Technologies Limited Shawlands Court Newchapel Road Tel: +44 (0) 1342 835234 Lingfield Fax: +44 (0) 1342 834306 Surrey RH7 6BL email: [email protected] England HG4117 2/2