HG4119 Automotive Miniature PCB Power Relay FEATURES 30 to 45A continuous current capacity Available with two footprints Available with open, dust cover and sealed version Automotive-oriented design TYPICAL AUTOMOTIVE APPLICATIONS Inertia valve control Flasher Automatic mirror adjustment Interval wiper control Fuel pump control Sliding roof control Ventilation motor Hazard light Alarm system Heater control Safety belt warning system Rear window heating Air conditioning Central door lock ABS Belt tension adjustment Power window Seat positioning CONTACT DATA 1 Form A (1H) Form 100A (S: 180A) 60A Make Max. Switching Current Break Material Initial Contact Resistance Max. Switching Voltage Max. Continuous Current Min. Load 45A Mechancial Service Life 1 Form C (1Z) NO NC 100A 30A 30A (S: 180A) 60A 30A 30A AgNi0.15, AgSnOInO 100 mΩ max. at 0.1A, 6VDC See curve, current dependent 30A 30A 45A 0.5A, 12VDC 107 ops. 1 Form B (1D) 2 x 105 ops, see Note 4 Electrical COIL DATA Coil Voltage Code Nominal Voltage ( VDC) Resistance (Ω) ±10% Must Operate Voltage max. ( VDC) Allowable Voltage ( VDC) Must Release Voltage min. ( VDC) 006 012 024 6 12 24 19 90 362 3.3 6.8 13.9 8.9 19.3 38.7 0.6 1.2 2.4 CHARACTERISTICS Operate Time Release Time Insulation Resistance Dielectric Strength Shock Resistance Vibration Resistance Drop Resistance Power Consumption Ambient Temperature Weight 5 ms. typical 3 ms. typical 100 MΩ, at 500 VDC, 50%RH 500 Vrms, 1 min. 20 g, 11 ms. DA 1.5mm, 20 - 200 Hz, functional 1 M height drop on concrete in final enclosure 1.5W, approx. -40ºC to 125ºC operating; -40ºC to 155ºC storage Open: 18 g; Covered: 23 g, approx. ORDERING DESIGNATION Example: HG4119 / 012 1H 11 Model Coil Voltage Code Contact Form 1H: 1 Form A ; 1D: 1 Form B ; 1Z: 1 Form C 8: US; 11: European Footprint Version Nil: Open; 1: Sealed; 2: Dust Cover Contact Material Nil: AgNi10; A: AgNi0.15; S: AgSnOInO -1 A -P For Sealed or Dust Cover US Footprint Nil: New Standard (with 1 common pin less); D: Old Style (Discontinued for New Designs) RoHS Compliant (lead-free): - P REFERENCE CURVES HG4119 RoHS 240605 1/2 HG4119 OVERALL DIMENSIONS, MOUNTING HOLES AND WIRING DIAGRAMS (mm) Overall Dimensions (11) (11) (8) (New Standard) (8) (Old Style) (8) Mounting Holes (Bottem View) (11) (8) (11) (New Standard) (8) (Old Style) (8) Wiring Diagrams (Bottom View) European Open & Covered and US Open & (Old Style) Covered US (New Standard) Covered NOTES 1. 2. 3. 4. 5. 6. All parameters, unless otherwise specified, are measured at ambient temperature 23ºC. Maximum make current refers to inrush current of lamp load. At ambient temperature of 85ºC, maximum allowable voltage should be reduced to 72%. Electrical life obtained at resistive or inductive load at 40A, 15VDC with suitable arc-suppression circuit attached with operating frequency of 1 ops/sec. Custom-made services available with operational quantity. Please let us know your special requirements. Specifications subject to change without prior notice. Willow Technologies Limited Shawlands Court Newchapel Rd, Lingfield Surrey, England RH7 6BL Tel: +44 (0) 1342-835234 Fax: +44 (0) 1342-834306 http://www.willow.co.uk email: [email protected] HG4119 ROHS 240605 2/2