TELEDYNE RELAYS SERIES 412 ESTABLISHED RELIABILITY TO-5 RELAYS DPDT Actual Size SERIES DESIGNATION RELAY TYPE 412 DPDT basic relay 412D DPDT relay with internal diode for coil transient suppression 412DD DPDT relay with internal diodes for coil transient suppression and polarity reversal protection 412T DPDT relay with internal transistor driver and coil transient suppression diode DESCRIPTION INTERNAL CONSTRUCTION UPPER STATIONARY CONTACT UNI-FRAME ARMATURE LOWER STATIONARY CONTACT MOVING CONTACT ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Temperature (Ambient) -65°C to +125°C Vibration 30 g’s to 3000 Hz (Note 1) Shock 75 g’s for 6 msec. (Note 1) half-sine Acceleration 50 g’s (Note 1) Enclosure All welded, hermetically sealed Weight 0.09 oz (2.55 gms.) max. The TO-5 relay, originally conceived and developed by Teledyne, has become one of the industry standards for low level switching from dry circuit to 1 ampere. Designed expressly for high density PC Board mounting, its small size and low coil power dissipation make the TO-5 relay one of the most versatile ultraminiature relays available. The following unique construction features and manufacturing techniques provide excellent resistance to environmental extremes and overall high reliability. • • • • • All welded construction. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity. High force/mass ratios for resistance to shock and vibration. Advanced cleaning techniques provide maximum assurance of internal cleanliness. Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities. The 412D and 412DD Series utilizes internal discrete silicon diodes for coil suppression and polarity reversal protection. The hybrid 412T features an internal silicon suppression diode and transistor driver. This hybrid package reduces PC board floor space by reducing the number of external components needed to drive the relay. By virtue of its inherently low intercontact capacitance and contact circuit losses, the TO-5 relay has shown itself to be an excellent ultraminiature RF switch for frequency ranges well into the UHF spectrum. A typical RF application for the TO-5 relay is in hand held radio transceivers, wherein the combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of T-R switching (see Figure 1). 38 SERIES 412 GENERAL ELECTRICAL SPECIFICATIONS (-65°C to +125°C unless otherwise noted) (Notes 2 & 8) Contact Arrangement Rated Duty Contact Resistance Contact Load Ratings (DC) (See Fig. 2 for other DC resistive voltage/current ratings) 2 Form C (DPDT) Continuous 0.1 ohm max. before life; 0.2 ohm max. after life at 1A/28VDC, (measured 1/8” from header) Resistive: 1 Amp/28VDC Inductive: 200 mA/28VDC (320 mH) Lamp: 100 mA/28VDC Low Level: 10 to 50 µA/10 to 50 mV Resistive: 250 mA/115VAC, 60 and 400Hz (Case not grounded) 100 mA/115VAC, 60 and 400Hz (Case grounded) 10,000,000 cycles (typical) at low level 01,000,000 cycles (typical) at 0.5A/28VDC resistive 00,100,000 cycles min. at all other loads specified above 2A/28VDC Resistive (100 cycles min.) Contact factory 450 milliwatts typical at nominal rated voltage at 25°C 2.0 msec max. at nominal rated coil voltage 412 Series: 1.5 msec max. 412D, 412DD Series: 4.0 msec max. 412T: 7.5 msec max. 1.5 msec max. 0.4 pf typical 10,000 megohms min. between mutually isolated terminals Atmospheric pressure: 500 VRMS/60 Hz 70,000 ft.: 125 VRMS/60Hz 412D, 412DD, 412T 1.0 max. 412D, 412DD, 412T 100 min. Contact Load Ratings (AC) Contact Life Ratings Contact Overload Rating Contact Carry Rating Coil Operating Power Operate Time Release Time Contact Bounce lntercontact Capacitance Insulation Resistance Dielectric Strength Negative Coil Transient (VDC) Diode P.I.V. (VDC) Base Turn Off Voltage (VDC) Emitter-base breakdown Voltage (BVEBO) (@25°C) (VDC) Collector-base breakdown Voltage (BVCBO) (@25°C & Ic = 100 µA) (VDC) 412T Transistor Characteristics DETAILED ELECTRICAL SPECIFICATIONS (-65°C to +125°C unless otherwise noted) (Note 8) BASE PART NUMBERS (See Note 11 for full P/N Example 412-5 412D-5 412DD-5 412T-5 ➧ Coil Voltage (VDC) Nom. Max. Coil Resistance 412, 412D, 412T (Note 3) (Ohms ±10% @ 25°C) 412DD (Note 3) Coil Current (mADC @ 25°C) Min. (412DD Series) Max. Coil Current (mADC @ 25°C) Min. (Note 7) (412T Series) Max. Pick-up Voltage (VDC, Max.) 412, 412D 412DD 412T (Note 7) Base Current to Turn On (mADC, Max.) (412T Series) (Note 7) Drop-out Voltage (VDC) Min. 412, 412D, 412T (Note 7) Max. Min. 412DD Max. PERFORMANCE CURVES (NOTE 2) 0 412-6 412D-6 412DD-6 412T-6 412-9 412D-9 412DD-9 412T-9 412-12 412D-12 412DD-12 412T-12 412-18 412D-18 412DD-18 412T-18 412-26 412D-26 412DD-26 412T-26 6.0 8.0 98 78 58.3 78.3 52.9 69.9 4.5 5.2 4.5 2.04 0.18 3.2 0.7 3.4 9.0 12.0 220 220 33.0 42.9 35.3 47.4 6.8 7.8 6.8 1.36 0.35 4.9 0.8 5.3 12.0 16.0 390 390 25.6 32.8 26.6 35.8 9.0 10.0 9.0 1.03 0.41 6.5 0.9 6.5 18.0 24.0 880 880 17.5 22.1 17.9 24.0 13.5 14.5 13.5 0.68 0.59 10.0 1.1 10.0 26.5 32.0 1560 1560 14.8 18.5 14.7 19.8 18.0 19.0 18.0 0.50 0.89 13.0 1.4 13.0 5.0 5.8 50 39 93.2 128.2 82.2 112.1 3.5 3.9 3.5 3.00 0.14 2.3 0.6 2.8 TYPICAL RF PERFORMANCE INS ERT .1 ION TYPICAL DC CONTACT RATING (RESISTIVE) 300 LOS S .2 LOAD VOLTAGE (VDC) .3 .4 10 1.92 20 RETURN 30 40 ATION ISOL 50 SS ACRO SWR) 1.22 LOSS (V ACTS CONT ION OLAT 1.07 1.02 OLES SS P ACRO 1.01 IS 60 VSWR dB 0.3 max. 6.0 min. 75 min. 250 200 150 100 50 1.00 70 1.00 .01 FIGURE 1 0.5 .1 .5 1.0 0 0.1 FIGURE 2 FREQUENCY (GHz) 39 0.2 0.3 0.4 0.5 0.6 LOAD CURRENT (AMPS DC) 0.7 0.8 0.9 1.0 SERIES 412 OUTLINE DIMENSIONS TERMINAL LOCATIONS AND PIN NUMBERING (REF. ONLY) (Viewed from Terminals) .370 (9.40) DIA. MAX. SCHEMATIC DIAGRAMS .031 (.79) ± .003 (0.08) .335 (8.51) DIA. MAX. TRANSISTOR BASE CONNECTION FOR 412T ONLY .035 (.89) ± .010 (0.25) 412 412DD 412D 412T .270 (6.86) MAX. .200 (5.08) ± .010 (.25) DIA. 36° ±3° TYP. WIRE LEAD: .75 (19.05) MIN. PIN: .187 (4.75) ± .010 (.25) (See Note 5) +.002 (.05) .017 (.43) –.001 (.03) DIA. DIMENSIONS ARE SHOWN IN INCHES (MILLIMETERS) SPACER PAD NOTES: Relays can be supplied with a spacer pad attached to the relay header. The pad permits the relay to be spaced away from the mounting surface facilitating solder joint inspection. To order add M4 to the part number (e.g. ER412M4-26). 1. Material: Polyester film. 2. Increase contact resistance by 0.01 ohm. .295 MAX (7.49) SCHEMATICS ARE VIEWED FROM TERMINALS TYPICAL TTL INTERFACE CIRCUIT (See Note 9) (A) Internal Suppression Diode (B) Internal Driver Transistor NOTES: 1. 2. 3. 4. 5. Relays contacts will exhibit no chatter in excess of 10 µsec or transfer in excess of 1 µsec. “Typical” characteristics are based on available data and are best estimates. No on-going verification tests are performed. For reference only. Coil resistance not directly measurable at relays terminals due to internal series semiconductor. 412DD and 412T only. Screened HI-REL versions available. Contact factory. Unless otherwise specified, relays will be supplied with leads as follows: Length will be standard 0.75” (19.05) minimum and will be either gold plated or solder coated. Contact your local representative for ordering information. 6. The slash and characters appearing after the slash are not marked on the relay. 7. Limit Base Emitter current to 15 mADC. 8. Unless otherwise specified, parameters are initial values. 9. Circuit is typical for all 412T Series. Values shown are for the 5 volt series and apply over the full operating temperature range. 10. RELIABILITY LEVEL FAILURE RATE %/10,000 CYCLES A 1.5 B 0.75 11. Teledyne Part Numbering System for Established Reliability Relays (See T2R® Program Introduction) EXAMPLE: ER 412 D Z M4 – 26 A / SQ Established Reliability Designator Termination Variant Q = Solder Coated Leads (Notes 5 and 6) S = .187” Leads (Notes 5 and 6) Relay Series Reliability and Screening Level (Note 10) D = Diode Suppression DD = Diode Suppression and Polarity Protection T = Transistor Driver Coil Voltage Mounting Variant Ground Pin (See page 112) M4 = Spacer Pad 12. Some relays are shown with spreader pads. Contact your local representative. 40 ©1996 TELEDYNE RELAYS 12525 Daphne Avenue Hawthorne, California 90250