Rotary Position Sensors !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EU RoHS Compliant s!LLTHEPRODUCTSINTHISCATALOGCOMPLYWITH%52O(3 s%52O(3ISTHE%UROPEAN$IRECTIVE%5ONTHE2ESTRICTIONOFTHE5SE OF#ERTAIN(AZARDOUS3UBSTANCESIN%LECTRICALAND%LECTRONIC%QUIPMENT sForMOREDETAILSPLEASEREFErToOurWEBSITE'MurATAgSAPProAcHFoR%52O(3' HTTPWWWMURATACOMINFOROHSHTML !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Contents Product specifications are as of May 2014. 1 Part Numbering p2 SMD/Lead Dust-proof Type 12mm Size SV03 Series p3 SV03 Series Specifications and Test Methods 2 p5 SMD/Lead Dust-proof Type 12mm Size SV01 Series p6 SV01 Series Specifications and Test Methods p8 SV Series Notice SV Series Packaging SV Series Application Manual p9 p11 p12 1. Storage p12 2. Board Design p12 3. Circuit Design p14 4. Mechanical Design p15 5. System Design p15 6. Mouting the Product on a Printed Circuit Board and Soldering It p15 7. Connecting the Product to a Mechanical Part p17 8. Examples of Actual Trouble and Preventive Measures p18 Qualified Standards p20 Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog. 2 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. o Part Numbering Rotary Position Sensor (Part Number) SV 03 A 103 q w e r AE A01 R00 t y u qProduct ID tRotor Hole Shape/Rotor Hole Size Product ID SV Code Rotor Hole Shape/Rotor Hole Size AE D Hole/4.0mm Dia. Rotary Position Sensor wSeries yIndividual Specification Code Code Series 01 Carbon Rotary Position Sensor 03 Carbon Rotary Position Sensor Series Code SV01 SV03 Individual Specification Code A01 SMD Type Standard A11 Lead Type Standard A01 SMD Type, Lead Type Standard eTerminal Shape Code Terminal Shape A SMD Type Code L Lead Type B00 Bulk R00 Reel T00 Tray rTotal Resistance Expressed by three figures. The unit is ohm. The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex.) 2 uPackaging Code Total Resistance 103 10000Ω (=10kΩ) Packaging !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Rotary Position Sensors 1 Dia. 2.1 0.6 #2 c Features +0 +0.1 4.0 -0 5.0 -0.1 Dia. SMD/Lead Dust-proof Type 12mm Size SV03 Series : Marking 1 2 3 14.9 8.2 5.5 +0.05 0.2 1.0 #1 #2 #3 11.0 2-1.00 -0.10 Dia. 12.0 3.0 -0 +0.1 2 1. High Durability: 300k cycles 2. Pb Free Soldering: 260 deg.C 3. Operating Temperature: -40 deg.C to +125 deg.C 4. Terminal Shape: SMD Type and Lead Type 5. Rotational Rotor: Through Hole Type 6. Thin Type: 2.1mm 7. RoHS Compliant SV03A 4-0.8±0.1 5.0 +0.1 4.0 -0 Dia. 4.3 2.1 +0 11.0 0.20±0.03 5.4±0.5 ( Tolerance:in ±0.3 mm ) 8.5±0.1 1. Switch for White goods 2. Digital Still Camera 3. Switch for automotive 4. Car audio 5. Multi function printer 6. Robot 7. Motor drive unit 5.0 -0.1 Dia. c Applications 12.3 : Marking 5.5 1.0 +0.05 4-0.8±0.2 6.9±0.5 1 2 3 2-1.00 -0.10 Dia. 12.0 3.0 -0 +0.1 2 SV03L 5.0 8.5±0.1 ( Tolerance:in ±0.3 mm ) Total Resistance Value (k ohm) Linearity (%) Effective Rotational Angle Rotational Torque Rotational Life SV03A103AEA01 10 ±30% ±2 333.3° (Ref.) 1mN.m (Ref.:10.5gf.cm) 300k cycles SV03L103AEA01 10 ±30% ±2 333.3° (Ref.) 1mN.m (Ref.:10.5gf.cm) 300k cycles Part Number c Constructions Cover Rotor #2 Terminal #1 Terminal Resin Substrate #2 Terminal #3 Terminal Wiper Resistive Element 3 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. c Standard Land Pattern c Standard Mounting Holes SV03A SV03L ø5.10±0.05 ø5.10±0.05 5.5 5.2 7.2 4-ø1.0 +0.1 -0 5 .95 5 0.0 0± 7.0 6.7 R6 2.0 2.0 8.7 1 1.1 R6 .95 0.0 0± 1.1 ø2.0 ø2.0 4-1.8 5.0±0.1 5.0±0.1 75°±1° 75°±1° Standard Land Pattern ( Tolerance:in ±0.1 mm ) c Characteristics Temperature Cycle (Thermal Shock) ΔTR : ±20% Linearity: ±3% Humidity ΔTR : ±20% Linearity: ±3% Vibration ΔTR : ±10% Linearity: ±3% Shock ΔTR : ±10% Linearity: ±3% Humidity Load Life ΔTR : ±20% Linearity: ±3% High Temperature Exposure ΔTR : +5/-30% Linearity: ±3% Low Temperature Exposure ΔTR : ±20% Linearity: ±3% Rotational Life ΔTR : ±20% Linearity: ±3% ΔTR: Total Resistance Change 4 Recommend Mounting Holes ( Tolerance:in ±0.1 mm ) !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV03 Series Specifications and Test Methods 1 The tests and measurements should be conducted under the condition of 15 to 35°C of temperature 25 to 75% of relative humidity and 86 to 106 kpa of atmospheric pressure unless otherwise specified. If questionable results occur that have been measured in accordance with the above mentioned conditions, the tests and measurements should be conducted under the condition of 25±2°C of temperature, 45 to 55% of relative humidity and 86 to 106 kpa of atmospheric pressure. When the potentiometer is tested after soldering on PCB, it should be tested after being kept in a room (15 to 35°C, 25 to 75%RH) over 24 hours except "Resistance to soldering heat". No. Item Test Methods Linearity should be specified a deviation with the below ideal straight line, between ±160° from the index point which is 50% of out put voltage. The ideal straight line has 100%/333.3° as taper and pass the above index point. Measurement is performed using the following measurement circuit, and the rotor should be rotated to clockwise direction. 100% Guarantee limit for linearity 1 Linearity DC5V (#3) Output Voltage Ratio (%) V (1-2) X100 V (1-3) GND (#1) 50% Connection Impedance: 1M ohm min. 100% / 333.3° Output (#2) 0% -160° CCW 0° CW +160° Rotational Angle (°) 2 Temperature Cycle (Thermal Shock) The rotary position sensor should be subjected to Table 2 temperature for 5 cycles. Then, the rotary position sensor should be kept in the dry box for 24 +8/-0 hrs. Sequence 1 2 3 Temperature (°C) -40±3 Shift Time +125±3 Time (min.) 30 5 max. 30 4 Shift Time 5 max. Table 2: One cycle of temperature cycle 3 Humidity The rotary position sensor should be stored in a chamber at temperature of +85±3°C and relative humidity of 85±5% for 1000±8 hrs. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours. 4 Vibration The rotary position sensor should be log-sweeped by the sine oscillatory wave of the maximum amplitude 1.5mm, Acceleration 98m/s2 (10G) under the condition of the vibrational frequency between 10Hz and 2kHz. In 1 cycle which is vibrated for each 20 minutes in the 3 direction of x, y, and z., 12 cycles should be applied during 12 hours in total. Then, the rotary position sensor should be kept in the dry box for 1 to 2 hours. 5 Shock The rotary position sensor should be applied the following shock test: Half sine wave with the peak acceleration 14,700m/s2 (1,500G) max. can be applied in each 3 times (total 18 times) in the 3 direction of x, y, and z with bidirectional. Then, the rotary position sensor should be kept in the dry box for 1 to 2 hours. 6 Humidity Load Life Full rated continuous working voltage not exceeding 5Vdc should be applied intermittently between terminal #1 and terminal #3 of the rotary position sensor, 1.5 hours on and 0.5 hours off, for 1000±8 hours in total in a chamber at a temperature of 85±3°C and relative humidity of 85±5%. After removing from the chamber, the rotary position sensor should be kept in the dry box for 5±1/6 hours. 7 High Temp. Exposure The rotary position sensor should be stored in a chamber at a temperature of 125±2°C without loading for 1000±8 hours. After removing from the chamber, the rotary position sensor should be kept in the dry box for 1 to 2 hours. 8 Low Temp. Exposure The rotary position sensor should be stored in a chamber at a temperature of -40±3°C without loading for 1000±8 hours. After removing from the chamber, the rotary position sensor should be kept in the dry box for 1 to 2 hours. 9 Rotational Life The adjustment rotor should be continuously rotated within ±160° of effective electrical rotational angle, at the rate of 3 cycle for 1 second for 300 thousands cycles under the condition of 25±2°C of temperature without loading. Then, the rotary position sensor should be kept in the dry box for 10±5 minutes. 5 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Rotary Position Sensors 2.1 0.6 #2 +0.1 Dia. 12.0 4.0 -0 0.2 1.0 +0.05 #1 #2 #3 11.0 2-1.00 -0.10 Dia. 3.0 -0 +0.1 : Marking 14.9 8.2 5.5 SV01A 4-0.8±0.1 5.0 ( Tolerancein: ±0.3 mm ) 8.5±0.1 c Applications 1. Switch for White goods 2. Digital Still Camera 3. Switch for automotive 4. Car audio 5. Multi function printer 6. Robot 7. Motor drive unit Mounting Face #2 2.9 3.5 4.0 +0.1 -0 Dia. #3 4-0.8±0.2 11.0 3.0 7.5 5.0 4-1.0 Dia. #1 #2 3.0 +0.1 -0 : Marking 6.9±0.5 5.4±0.5 0.20±0.03 1. Excellent resistance materials and high reliability wiper achieves 1M cycles. 2. Leaded terminal type is available. 3. D formation thru-hole rotor enables selection of any kind of gear shape. 4. Ultra-thin size (2.1mm height) 5. Au plated terminals. 6. RoSH Compliant +0 c Features 12.0 2 5.0 -0.1 Dia. SMD/Lead Dust-proof Type 12mm Size SV01 Series SV01L 5.0 Total Resistance Value (k ohm) Linearity (%) Effective Rotational Angle Rotational Torque Rotational Life SV01A103AEA01 10 ±30% ±2 333.3° (Ref.) 2mN.m (Ref.:21gf.cm) 1M cycles SV01L103AEA11 10 ±30% ±2 333.3° (Ref.) 2mN.m (Ref.:21gf.cm) 1M cycles Part Number c Constructions Rotor Cover #2 Terminal Resin Substrate #3 Terminal #2 Terminal Resistive Element 6 ( Tolerancein: ±0.3 mm ) Wiper #1 Terminal !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. c Standard Land Pattern c Standard Mounting Holes SV01A SV01L ø5.10±0.05 +0.1 5.5 5.2 2 R6 6.7 .95 ø2.0 2. 00 1. 10 ±0 .0 7.0 8.7 7.2 4-ø1.0 -0 5 2.5 75°±1° 4-1.8 ( 5.0±0.1 Tolerance: ±0.1 in mm ) 2.5 5.0 ( Tolerance: ±0.1 in mm ) c Characteristics Temperature Cycle (Thermal Shock) ΔTR : ±20% Linearity: ±3% Humidity ΔTR : ±20% Linearity: ±3% Vibration ΔTR : ±10% Linearity: ±3% Shock ΔTR : ±10% Linearity: ±3% Humidity Load Life ΔTR : ±20% Linearity: ±3% High Temperature Exposure ΔTR : +5/-30% Linearity: ±3% Low Temperature Exposure ΔTR : ±20% Linearity: ±3% Rotational Life ΔTR : ±20% Linearity: ±3% ΔTR: Total Resistance Change 7 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV01 Series Specifications and Test Methods The tests and measurements should be conducted under the condition of 15 to 35°C of temperature 25 to 75% of relative humidity and 86 to 106 kpa of atmospheric pressure unless otherwise specified. If questionable results occur that have been measured in accordance with the above mentioned conditions, the tests and measurements should be conducted under the condition of 25±2°C of temperature, 45 to 55% of relative humidity and 86 to 106 kpa of atmospheric pressure. When the potentiometer is tested after soldering on PCB, it should be tested after being kept in a room (15 to 35°C, 25 to 75%RH) over 24 hours except "Resistance to soldering heat". 2 No. Item Test Methods Linearity should be specified a deviation with the below ideal straight line, between ±160° from the index point which is 50% of out put voltage. The ideal straight line has 100%/333.3° as taper and pass the above index point. Measurement is performed using the following measurement circuit, and the rotor should be rotated to clockwise direction. 100% Guarantee limit for linearity 1 Linearity DC5V (#3) Output Voltage Ratio (%) V (1-2) X100 V (1-3) GND (#1) 50% Connection Impedance: 1M ohm min. 100% / 333.3° Output (#2) 0% -160° CCW 0° CW +160° Rotational Angle (°) 2 Temperature Cycle (Thermal Shock) The rotary position sensor should be subjected to Table 2 temperature for 5 cycles. Then, the rotary position sensor should be kept in the dry box for 24 +8/-0 hrs. Sequence 1 2 3 Temperature (°C) -40±3 +25±2 +85±3 Time (min.) 30 5 max. 30 4 +25±2 5 max. Table 2: One cycle of temperature cycle 8 3 Humidity The rotary position sensor should be stored in a chamber at temperature of +60±2°C and relative humidity of 90-95% for 250±8 hrs. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours. 4 Vibration The rotary position sensor should be tested under the condition of the amplitude of 1.5mm, the frequency range from 10 to 55Hz (should be traversed in approximately one minute) and 2 hours in each of 3 mutually perpendicular directions (total 6 hours). Then, the rotary position sensor should be kept in the dry box for 1-2 hrs. 5 Shock The rotary position sensor should be tested under the condition of the peak acceleration 20G max. in half-sine wave and 5 shocks in each of 3 mutually perpendicular directions (total 15 shocks). Then, the rotary position sensor should be kept in the dry box for 1-2 hrs. 6 Humidity Load Life Full rated continuous working voltage not exceeding 5Vdc should be applied intermittently between terminal #1 and terminal #3 of the rotary position sensor, 1.5 hours on and 0.5 hours off, for 96±4 hours in total in a chamber at a temperature of +40±2°C and relative humidity of 90-95%. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours. 7 High Temp. Exposure The rotary position sensor should be stored in a chamber at the temperature of +85±3°C without loading for 250±8 hours. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours. 8 Low Temp. Exposure The rotary position sensor should be stored in a chamber at the temperature of -40±3°C without loading for 168±4 hours. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours. 9 Rotational Life The adjustment rotor should be continuously rotated within ±160° of effective electrical rotational angle, at the rate of one cycle for 6 seconds for 1 Million cycles under the condition of +25±2°C of temperature without loading. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Notice c Notice (Operating and Storage Conditions) 1. Store in temperatures of -10 to +40deg. C and relative humidity of 30-85%. 2. Do not store in or near corrosive gases. 3. Use within six months after delivery. 4. Open the package just before using. 5. Do not store under direct sunlight. 6. Do not use the rotary position sensor under the following environmental conditions. If you use the rotary position sensor in an environment other than listed below, please consult a Murata factory representative prior to using. (1) Corrosive gasses atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. Water, Oil, Medical liquid, Organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above c Notice (Soldering and Mounting) 1. Soldering (1) SV series can be soldered by reflow soldering method and soldering iron. Do not use flow soldering method (dipping). (2) The dimension of land pattern used should be Murata's standard land pattern at reflow soldering. Excessive land area may cause displacement due to the effect of the surface tension of the solder. Insufficient land area may cause insufficient soldering strength on PCB (SMD Type). (3) Soldering conditions Refer to the temperature profile. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the rotary position sensor may deviate from the specified characteristics. (4) The amount of solder is critical. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals. (5) The soldering iron should not come in contact with the cover of the rotary position sensor. If such contact does occur, the rotary position sensor may be damaged. 2. Mounting (1) Use PCB hole to meet the pin of the rotary position sensor. If the rotary position sensor is inserted into insufficient PCB hole, the rotary position sensor may be damaged by mechanical stress (Lead type). (2) Do not apply excessive force, preferable 9.8N max. (Ref. 1kgf) when the rotary position sensor is mounted to the PCB. (3) Do not warp and/or bend PCB to prevent the rotary position sensor from breakage. 3. Cleaning Cannot be cleaned because of open construction. Continued on the following page. 9 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Notice Continued from the preceding page. c Soldering Profile o Reflow Soldering Profile 1. Soldering profile for Lead-free solder (96.5Sn/3.0Ag/0.5Cu) Temperature (°C) T5 T3 T2 T4 T1 t2 Limit Profile t3 Standard Profile Time (s) t1 Standard Profile Pre-heating Series SV Limit Profile Peak Cycle of Temperature Reflow Time (t2) (T3) Heating Temp. (T1) Time (t1) Temp. (T2) °C sec. °C sec. °C Time 220 30 to 60 245±3 2 150 to 180 60 to 120 Pre-heating Temp. (T1) Time (t1) °C sec. 150 to 180 60 to 120 Peak Cycle of Temperature Reflow Time (t3) (T5) Heating Temp. (T4) °C sec. °C Time 230 30 to 50 260 +5/-0 2 2. Soldering profile for Eutectic solder (63Sn/37Pb) Temperature (°C) (Limit profile: refer to 1) Standard Profile T3 Pre-heating t2 T1 Standard Profile SV t1 Peak Cycle of Temperature Reflow Time (t2) (T3) Heating Series T2 Temp. (T1) Time (t1) °C sec. Temp. (T2) °C sec. °C Time 150 60 to 120 183 30 230 1 Time (s) o Soldering Iron Standard Condition Series Temperature of Soldering Iron Tip Soldering Time Soldering Iron Power Output Cycle of Soldering Iron °C sec. W Time 350±10 3 max. 30 max. 1 SV c Notice (Handling) Uncontrolled mechanical force (except usual rotation on the hollow rotor of product) may cause a change of electrical characteristics, an increase of rotational torque or mechanical damage of the product. Therefore, please consider the following points for your design. 1. The product must be soldered by the terminals. Do not affix by screw clamping to support board as this could cause mechanical deformation. 2. The connecting shaft must be sustained by the bearing. No uncontrolled force should be applied to the hollow rotor. c Notice (Other) 1. Please make sure the connecting impedance is not less than 1M ohm. The rotary position sensor is designed to connect the output terminal and A/D port of the microprocessor directly. Therefore, connecting impedance presupposes certain M ohm and the contact resistance is set high. 2. To minimize processing errors and rare cases of noise influence when data is installed, please consider the following when programming your software. 10 (1) Data install should be done plural times and applied the mean value. (2) Data considered as error should be invalid. (3) If suspicious data is found, the data should be re-installed. 3. Before using rotary position sensor, please test after assembly in your particular mass production system. 4. MURATA cannot guarantee rotary position sensor integrity when used under conditions other than those specified in this document. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Packaging c Minimum Quantity Minimum Quantity (pcs.) Part Number Tray ø180mm reel ø330mm reel Ammo Pack Magazine Bulk SV01A103AEA01 — 1000 — — 50 — SV01L103AEA01 — — — — — 1000 SV03A103AEA01 — 1000 — — 50 — SV03L103AEA01 — — — — — 1000 c Dimensions of Reel c Dimensions of Plastic Tape 3.5 16.3 21.0±0.8 Dia. 11.5 80±1 Dia. 2.0±0.5 24.0 1.5 +0.1 -0 Dia. a 13.0±0.5 Dia. 0.4±0.05 1.75 4.0 2.0±0.05 25.5±1.0 29.5±1.0 11.4 a' Across a-a' 16.0 330±2 Dia. (in mm) Tape feeding direction ( Tolerance: ±0.1 in mm ) 11 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual 1. Storage s4HEELECTRODESOFEACH36SERIESROTARYPOSITIONSENSOR HEREAFTERCALLEDPRODUCTAREPLATEDTOENSURESOLDERABILITY s(OWEVERIFAPRODUCTISEXPOSEDTOHIGHTEMPERATUREAND 3TORAGE-ETHOD 3TOREPRODUCTSINACONDITIONSUCHTHATTHEMINIMUMPACKING BOXESARENOTSUBJECTEDTOALOAD$ONOTSTACKTHEBOXESTO HUMIDITYSULFURGASOROTHERCONTAMINATEDENVIRONMENTTHE THEEXTENTTHATTHEBOTTOMBOXBECOMESDEFORMEDUNDERTHE SURFACEOFTHEELECTRODESMAYOXIDIZEORSULFIDIZERESULTINGIN WEIGHTOFTHEBOXESSTACKEDONTOPOFIT DEFECTIVESOLDERING s4HEFOLLOWINGARETHEPRECAUTIONSTOBEOBSERVEDCONCERNING STORAGEMANAGEMENTSOPLEASEREFERTOTHEM 3TORAGE%NVIRONMENT %NSURETHATTHEATMOSPHEREISWITHINATEMPERATURERANGEOF 3TORAGE0ERIOD 5SEPRODUCTSWITHINMONTHSAFTERTHEYARESHIPPEDFROMUS )FYOUUSEPRODUCTSAFTERMONTHSHAVEELAPSEDCARRYOUTA SOLDERABILITYTESTTOMAKESURETHATTHEREISNOPROBLEMPRIOR TOUSE BETWEENAND°#ANDAHUMIDITYRANGEOFBETWEEN AND2(ANDDOESNOTCONTAINCHLORINESULFUROROTHER CORROSIVEGAS!LSOAVOIDSTORINGTHEPRODUCTSINALOCATION THATISEXPOSEDTODIRECTSUNLIGHT 2. Board Design 3-$#OMPONENTS ,AND0ATTERNUSERECOMMENDLANDPATTERNONLY 7HENALANDPATTERNAREATHATISGREATERTHANNECESSARY ISUSEDAPOSITIONALERRORORROTATIONOFTHEPRODUCTMAY CONNECTEDTOAMECHANICALPART SOLDERWHICHMAYRESULTINTROUBLEWHENTHEPRODUCTIS OCCURDUETOTHEEFFECTOFTHESURFACETENSIONOFTHE LOWWHICHMAYRESULTINTHEPRODUCTSEPARATINGFROMTHE BONDINGTHEPRODUCTTOTHEPRINTEDCIRCUITBOARDWILLBE !LSOIFTHELANDPATTERNAREAISTOOSMALLTHEFORCE BOARD )NORDERTOPREVENTTHEABOVETROUBLEPLEASEUSEOUR STANDARDLANDPATTERN (4OLERANCE± INMM 3TANDARD,AND0ATTERN 4HISPRODUCTHASTWOTERMINALSATPOSITIONS!AND" TOENSUREFLEXIBILITYOFMOUNTINGONTHEBOARDTOCOPE WITHVARIOUSWIRINGLAYOUTS " 4HISPERMITSINLINEUSEINWHICHTHEAND TERMINALSARECONNECTEDWITHTHETERMINALONTHE SAMESIDE!ORZIGZAGALIGNMENTUSEINWHICHTHE TERMINALONTHE"SIDEISCONNECTEDTOTHECIRCUIT )NTHECASEOFINLINEUSEASWELLBESURETOPROVIDEA LANDFORTHETERMINALONTHE"SIDEINORDERTOENSURE THATTHEPRODUCTISFIXEDTOTHEBOARDWITHADEQUATE FORCE ! #ONTINUEDONTHEFOLLOWINGPAGE 12 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual Continued from the preceding page. (2) Locating Holes on Print Circuit Board The mounting position of the product is determined by the holes in the following three places. q Center position (X-and Y-directions) is determined by Hole (one location) for boss at rear of product. Boss 14.9 w Rotation angle (θ angle) is determined by hole(s) for 8.2 5.5 locating pins at rear of product. (θ-angle can be fixed by one hole or two holes.) Locating Pins 4-0.8±0.1 5.0 8.5±0.1 (Tolerance:in±0.3 mm) Determine the dimension of the locating holes as follows, depending upon the method of mounting the product (when mounting the product using a mounter or mounting it by hand). q When mounting the product by hand .05 0±0 ø5.1 R6. 95 5 .0 0 2. ø2.0 ±0 0 .1 1 (Tolerance:in±0.1 mm) 75°±1° w When using a mounter Expand the size of each hole to account for the accuracy of the mountes. Note, however, that the accuracy of the mounting position of the product is determined by the "accuracy of the mounter". <2> Leaded Parts terminal pitch of the product. If you attempt to mount the product into thru-holes that do not match the terminal 5.5 4-ø1.0 +0.1 –0 7.0 4-ø1.0 +0.1 –0 5.5 Determine the thru-hole positions so as to match the 7.0 (1) Thru-holes ø5.10±0.05 pitch, the terminals may become deformed and in the worst case may break. Also, random variations in the mounting position of the product may occur. R6 .95 ø2.0 .05 2.0 In order to prevent the above trouble, use our standard ±0 0 1.1 thru-hole dimensions. 5.0 5.0±0.1 75°±1° SV01 SV03 Standard Thru-Hole Dimensions (Tolerance:in±0.1 mm) (2) Positioning Accuracy Compared to an SMD product, there is a tendency for large variations in the mounting position of the product to occur. If positioning accuracy is important when making connection to a mechanical part, we recommend that you use an SMD product. Continued on the following page. 13 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual #ONTINUEDFROMTHEPRECEDINGPAGE 3. Circuit Design (1) Recommended Circuit s4HISPRODUCTISDESIGNEDONTHEASSUMPTIONTHATITISTOBE USEDWITHTHEOUTPUTTERMINALSDIRECTLYCONNECTEDTOTHE !$PORTOFAMICROPROCESSORASSHOWNIN&IG)NOTHER WORDSTHECONTACTRESISTANCEINSIDETHEPRODUCTISSLIGHTLY HIGHBASEDONTHEASSUMPTIONTHATTHECONNECTION 0RODUCT A/D IMPEDANCEVALUEISOFTHEORDEROFMEGOHMS #ONSEQUENTLYWHENUSINGTHEPRODUCTINTHECIRCUITOF &IGTAKESTEPSTOENSURETHATTHECONNECTIONIMPEDANCE DOESNOTFALLBELOW-Ω 2EFERTOSUBSECTIONOF%XAMPLESOF!CTUAL4ROUBLE AND0REVENTIVE-EASURES &IG 0RODUCT A/D &IG !VOIDINSERTINGAFIXEDRESISTORINSERIESWITHTHESENSOR s"ECAUSETHERESISTIVEELEMENTUSEDINTHISPRODUCTISA CARBONRESISTIVEELEMENTITSTEMPERATURECHARACTERISTICS CAUSEITSTOTALRESISTANCEVALUETOCHANGEWITHTHEAMBIENT TEMPERATURE4HETOTALRESISTANCEALSOCHANGESDUETO CHANGESINTHEEXTERNALENVIRONMENTALONGWITHTHE &IXED2ESISTOR PASSAGEOFTIME (OWEVERTHERESISTANCEOFEACHPARTSOFTHERESISTIVE ELEMENTCHANGESUNIFORMLYSOTHEOUTPUTVOLTAGE 0RODUCT A/D CHARACTERISTICSWHICHAREDETERMINEDBYTHEVOLTAGE DIVISIONRATIODUETOTHECONTACTPOINTWILLNOTBEGREATLY AFFECTED &IXED2ESISTOR s.OTEHOWEVERTHATIFFIXEDRESISTORSARECONNECTEDIN SERIESWITHTHEPRODUCTASSHOWNINTHEFIGUREATRIGHTTHE OUTPUTVOLTAGECHARACTERISTICSMAYBEADVERSELYAFFECTED BYTHEDIFFERENCEINTHERATEOFCHANGEOFTHERESISTANCEOF THEFIXEDRESISTORSANDTHATOFTHERESISTIVEELEMENTOFTHE PRODUCT&ORTHISREASONAVOIDCONNECTINGFIXEDRESISTORIN SERIESWITHTHESENSOR !VOIDUSINGTHEPRODUCTATAVOLTAGETHATEXCEEDSTHERATED VOLTAGE s)FTHEPRODUCTISUSEDATAVOLTAGETHATEXCEEDSTHERATED VOLTAGETHERESULTINGABNORMALHEATGENERATIONMAY IMPAIRTHEFUNCTIONOFTHEPRODUCT #ONTINUEDONTHEFOLLOWINGPAGE 14 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual Continued from the preceding page. 4. Mechanical Design (1) Cross-section dimension of the shaft inserted into the rotor s4HECROSSSECTIONDIMENSIONOFTHESHAFTINSERTEDINTOTHE ,OADONTHEPRODUCTBEARING s)FATHRUSTRADIALORTWISTLOADFOREXAMPLEISAPPLIEDTO rotor of the product greatly affects the characteristics of THEROTORBEARINGTHEELECTRICALCHARACTERISTICSMAYCHANGE the product. THEROTATIONALTORQUEMAYINCREASEORMECHANICALDAMAGE s)FTHEDIMENSIONISTOOSMALLBACKLASHBETWEENTHE PRODUCTROTORANDTHEINSERTEDSHAFTWILLOCCURWHICHMAY cause a delay in the change in the output voltage accompanying the rotation of the shaft. MAYOCCUR7HENDESIGNINGASYSTEMPAYATTENTIONTOTHE FOLLOWINGPOINTS q-OUNTTHEPRODUCTONLYBYSOLDERINGTHETERMINALS !VOIDSCREWINGITTOANAUXILIARYBOARDFOREXAMPLE s)FTHEDIMENSIONISTOOLARGETHEROTORWILLBREAKRESULTING BECAUSETHISMAYCAUSEDEFORMATIONOFTHEPRODUCT INANINCREASEINTHEROTATIONALTORQUEANDALSOABNORMAL w4HESHAFTTHATISINSERTEDINTOTHEROTORISSUPPORTED WEAROFTHEPRODUCTBEARING)NADDITIONWEARDUSTFROM BYABEARINGSODONOTAPPLYALOADTOTHISBEARING THEBEARINGINWHICHWEAROCCURSMAYADVERSELYAFFECTTHE 2EFERTOSUBSECTIONOF%XAMPLESOF!CTUAL4ROUBLE CHARACTERISTICSOFTHEOUTPUTVOLTAGEANDSOON and Preventive Measures.) 5. System Design (1) Precautions for Loading Data )MPLEMENTTHEFOLLOWINGSOFTWAREMEASURESINORDERTO MINIMIZEDATALOADINGFAILURESWHICHOCCUROCCASIONALLY ANDALSOTHEEFFECTOFSLIDINGNOISEANDEXTERNALNOISE q0ERFORMSEVERALDATALOADINGOPERATIONSANDOBTAINTHE mean value. w$ISABLEDATATHATISCONSIDEREDTOBETHECAUSEOFDATA loading failures. e)FANYDOUBTARISESTAKEAPPROPRIATEACTIONSUCHAS carrying out a data acquisition operation once again. 6. Mouting the Product on a Printed Circuit Board and Soldering It 7HENMOUNTINGTHEPRODUCTWITHAMOUNTERANDREFLOWSOLDERINGIT (1) Quantity of solder paste s4HESTANDARDCOATINGTHICKNESSOFSOLDERPASTEUSED on SMD products is 150μm. s)FTHEQUANTITYOFSOLDERISINSUFFICIENTTHESOLDER ADHESIONSTRENGTHMAYBEINADEQUATE #ONVERSELYIFTHEREISTOOMUCHSOLDERq solder BRIDGINGORwINGRESSOFFLUXINTOTHEPRODUCTMAY OCCURIMPAIRINGTHECONTACTCONDITIONOFTHEELECTRICAL CONTACTS4HISINTURNWILLRESULTINANABNORMALOUTPUT voltage. s4HESTANDARDSOLDERPASTEIS3N!G#U #ONTINUEDONTHEFOLLOWINGPAGE 15 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual #ONTINUEDFROMTHEPRECEDINGPAGE (2) Applicable mounter s4HEJUDGMENTCONCERNINGWHETHERORNOTAPARTICULAR s!ROTARYPOSITIONSENSORISANATYPICALCOMPONENT SOITISNECESSARYTOUSEAPLACEMENTMACHINE MOUNTERISSUITABLEDEPENDSUPONTHEREQUIRED SUITABLEFORTHISPART2EFERTOTHETABLEBELOW&OR MOUNTINGSPEEDANDMOUNTINGPOSITIONACCURACY"E DETAILSPLEASECONTACTTHEVARIOUSMOUNTER SURETOCARRYOUTANADVANCEMOUNTINGCHECKONTHE MANUFACTURERS ACTUALMANUFACTURINGLINE Name of Manufacturer Model Name #-p CM602 0ANASONIC&ACTORY3OLUTIONS#O,TD Nozzle Part No./Series Name/Drawing No. Nozzle Shape Suction Position NOZZLE "-3ERIES 10807GK823 -3&3ERIES 10807GK823 YV100X 968G 3+6--* YV88X 9AMAHA-OTOR#O,TD 968G 9'2 9'2 !CUSTOMIZEDNOZZLEOFTHESAMESHAPE ASTHATOFTHE3+6--*MUSTBE NEWLYFABRICATED 0LEASECONTACT9AMAHA-OTOR#O,TD YS100 YS88 +% .ONOZZLE +% .ONOZZLE *5+)#ORPORATION '8(3ERIES (ITACHI(IGH4ECHNOLOGIES#ORPORATION 4)-3ERIES 4)-8 I05,3%#O,TD &UJI-ACHINE-FG#O,TD (IGHSPEEDHEAD64OR6' -ULTIFUNCTIONHEAD74OR7' (IGHSPEEDHEAD64OR6' -ULTIFUNCTIONHEAD74OR7' (IGHSPEEDHEAD64OR6' -ULTIFUNCTIONHEAD74OR7' M2 3,99- M6 3,99- M6e 3,99- M2 3,99-4 M6 3,99-4 M6e 3,99-4 .84.84)) )TISNECESSARYTONEWLYFABRICATEA CUSTOMIZEDNOZZLE 80 0LEASECONTACT&UJI-ACHINE-FG#O,TD 2EFLOW4EMPERATURE0ROFILE 4HESTANDARDCONDITIONSARESHOWNTOTHERIGHT 0REHEATINGINAIR 3OLDERING 'RADUALCOOLING (in air) 4EMPERATURE°C) 300 250 200 150 100 50 0 150 to 180°C TOSEC 220°C TOSEC 3OLDERMELTINGZONE ∗0EAKTEMPERATURE±3°C ∗.UMBEROFREFLOWSOLDERINGSPASSESMAX ∗,EADFREESOLDER3N!G#U #ONTINUEDONTHEFOLLOWINGPAGE 16 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual #ONTINUEDFROMTHEPRECEDINGPAGE 7HENMOUNTINGTHEPRODUCTBYHANDANDSOLDERINGITWITH ASOLDERINGIRON (1) Quantity of Solder s&ORBOTH3-$ANDLEADEDPRODUCTSSUPPLYAQUANTITY OFWIRESOLDERTHATISWITHINTHERANGEWHERESOLDER BRIDGINGBETWEENTHETERMINALSDOESNOTOCCUR s4HESTANDARDWIRESOLDERIS3N!G#U 3OLDERING)RON s4HESTANDARDCONDITIONSAREASSHOWNATRIGHT 4EMPERATUREOFSOLDERINGIRONTIP±°# 3OLDERINGTIME 7ITHINSECONDSPERTERMINAL $IAMETEROFTHESOLDERINGIRONTIPMMMAX 7ATTAGEOFIRON 7MAX s7HENSOLDERINGTAKECARETHATTHETIPOFTHESOLDERING IRONDOESNOTCOMEINTODIRECTCONTACTWITHTHE Rotor PRODUCTCOVERROTORPLASTICSUBSTRATEETC #OVER )FSUCHCONTACTDOESOCCURTHEPRODUCTMAYBE DAMAGED 4ERMINAL 2ESIN3UBSTRATE 4ERMINAL 4ERMINAL 2ESISTIVE%LEMENT 7IPER 4ERMINAL s(EATBOTHTHETERMINALANDTHELANDATTHESAMETIME SOTHATTHEWIRESOLDERMELTSQUICKLY4HISWILLREDUCE DEFORMATIONOFTHERESINSUBSTRATEOFTHEPRODUCTDUE TOHEATTRANSMITTEDFROMTHETERMINALS 7ASHING s4HISPRODUCTISNOTOFASEALEDCONSTRUCTIONSOYOUCANNOTWASHIT 7. Connecting the Product to a Mechanical Part s)NCASEOFUSINGGREASEORLUBRICANTONCONNECTINGSHAFTOR GEARPLEASEPREVENTGREASEORLUBRICANTCOMINGINTOTHE PRODUCT)FGREASEORLUBRICANTGETSINSIDETHEPRODUCTTHE PRODUCTMAYDEVIATEFROMTHESPECIFIEDCHARACTERISTICS 2EFERTOSUBSECTIONOF%XAMPLESOF!CTUAL4ROUBLEAND 0REVENTIVE-EASURES s7HENCOMBININGTHEPRODUCTWITHAMECHANICALPARTPLEASE ENSURETHATTHECENTEROFTHEPRODUCTgSROTORHOLECOINCIDES WITHTHECENTEROFTHESHAFTTHATISTOBEINSERTEDINTOTHEROTOR 2EFERTOSUBSECTIONOF%XAMPLESOF!CTUAL4ROUBLEAND 0REVENTIVE-EASURES #ONTINUEDONTHEFOLLOWINGPAGE 17 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual Continued from the preceding page. 8. Examples of Actual Trouble and Preventive Measures 1. Do not apply a load other than rotational motion to the bearing. Because this product has been designed with emphasis on miniaturization and low weight, the bearing is not intended to Bearing Rotor support a load. For this reason, please, provide a separate Cover bearing function to ensure that an excessively high load is not applied to the bearing of the product. #2 Terminal If a load is applied to the bearing in the radial or thrust direction, the bearing may wear, resulting in the following trouble. q Deterioration of output voltage linearity due to backlash in the rotor w Deterioration of the contact condition of the contacts due to wear dust Resin Substrate #3 Terminal Also, be sure to carry out an evaluation using an actual #2 Terminal machine. Wiper Resistive Element #1 Terminal 2. Do not allow grease or other lubricant to get into the product. The rotational life of this product has been increased by appropriate selection of materials, processing method, and so on, without relying on lubricants. Consequently, if grease or other lubricant gets into the product, trouble is likely to Apply lubricant only to gear teeth. occur. This product is not of a sealed construction, so lubricant may flow into it from the bearing or gaps in the case, for example. When it is unavoidably necessary to coat a gear, or other part, that you use with grease, or another lubricant, take the Do not apply grease to shaft. following precautions to prevent grease from getting into the product. Product q Use a high viscosity lubricant w Do not allow lubricant to get onto the shaft that is to be connected to the product. (In the case of a shaft that is integral with the gear, apply lubricant only to the gear teeth.) 3. Ensure that the connection impedance is at least 1MΩ. This product has increased contact resistance (sliding noise) in order to maximize its rotational life. Consequently, in order to reduce the effect of sliding noise, it is necessary to reduce i the current flowing through the contacts (current i indicated in the figure at right) as far as possible. Accordingly, take steps Product A/D to ensure that the internal impedance of the circuit connected to the output terminal (#2 terminal) is at least 1MΩ. Be particularly careful in the case of the filter circuit shown in the figure at right. Do not rheostat connect as shown in the figure at right due to the contact resistance is slightly high. Continued on the following page. 18 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SV Series Application Manual Continued from the preceding page. The graph at right shows the results of measuring the output 3.9 voltage linearity of the same sample when the impedance to which it is connected is changed between 1MΩ and 200kΩ. It 3.8 can be seen that the effect of sliding noise is reduced when the connection impedance is increased. Linearity (V) 3.7 3.6 3.5 3.4 3.3 630 640 650 660 670 680 690 700 Graph 1 When the connection impedance is 1MΩ 4.2 4.1 Linearity (V) 4.0 3.9 3.8 3.7 3.6 630 640 650 660 670 680 690 700 Graph 2 When the connection impedance is 200kΩ 4. When using the product in an atmosphere containing a corrosive gas (chlorine, sulfur, etc.), install it in a sealed structure. This product is not of a sealed construction, so the contacts and resistive element inside it are exposed directly to the ambient air. For this reason, if the product is used in an atmosphere containing a corrosive gas, the contacts and resistive element may corrode. When it is unavoidably necessary to use the product in an atmosphere containing a corrosive gas, install the product in a sealed structure. 5. Ensure that the positions of the mechanical part (shaft) that you wish to connect to the product and the product rotor hole do not become misaligned. When combining a mechanical part with the product, ensure that the center of the product rotor hole coincides with the center of the shaft to be inserted into the rotor. If you use these parts in a misaligned condition, the bearing may wear, resulting in the following trouble. q Deterioration of output voltage linearity due to play in the rotor w Deterioration of the contact condition of the contacts due to wear dust 19 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Qualified Standards c Qualified Standards The products listed here have been produced by the ISO9001 and ISO/TS16949 certified factory. MURATA FACTORY Qualified Date Standard Qualified Number Wuxi Murata Electronis Co.,Ltd. May 12, 1999 UNDERWRITERS LABORATORIES INC. A7924 ∗ No ODCs (Ozone Depleting Chemicals) are used on all Murata's Rotary Position Sensors. 20 Cat. No. R51E-2 Global Locations For details please visit www.murata.com Note 1 Export Control For customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan: For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. 2 Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party’s life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. 1 Aircraft equipment 2 Aerospace equipment 3 Undersea equipment 4 Power plant equipment 5 Medical equipment 6 Transportation equipment (vehicles, trains, ships, etc.) 7 Traffic signal equipment 8 Disaster prevention / crime prevention equipment 9 Data-processing equipment 10 Application of similar complexity and/or reliability requirements to the applications listed above Murata Manufacturing Co., Ltd. www.murata.com 3 Product specifications in this catalog are as of May 2014. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4 Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6 Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party’s intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7 No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.