Shock Sensors - PKGS-00TAV-R The shock sensor, PKGS series, is acceleration sensor with 2 terminals and detects acceleration & shock to be applied from outside, as electrical signal. By bimorph piezo elements clamped at the one-end (Cantilever construction) with original polarisation technology, the shock sensor has high sensitivity and excellent durability. The shock sensor is reflow solderable SMD type. The shock sensor can have inclined primary axis. Specifications Primary Axis Inclined Angle Sensitivity (Typ.) Capacitance (Typ.) Features 1. Small size, low profile, high sensitivity and excellent durability. 2. Excellent linearity 3. High resonant frequency and wide bandwidth 4. Available tape and reel packaging 5. Reflowable Insulation Resistance (min.) Resonant Frequency (Typ.) Non-linearity (Typ.) 1. Automotive for TPMS use only 0.800mV/G 245pF 10000M ohm 39kHz 1% Transverse Sensitivity (Typ.) Shock Resistance Application 0° Min Operating Temp. Range Max Operating Temp. Range Min Storage Temp. Range Max Storage Temp. Range Application Sensitivity Type 3000G (0.3ms duration) -40℃ 125℃ -40℃ 125℃ Automotive for TPMS use only Electric charge sensitivity type Page 1 of 5 Willow Technologies Ltd. + 44 (0) 1342 717102 Unit 3 Borers Yard, Borers Arms Road, Copthorne, West Sussex, RH10 3LH, United Kingdom. + 44 (0) 1342 717014 [email protected] http://www.willow.co.uk W41FW2013 Dimensions Page 2 of 5 Willow Technologies Ltd. Unit 3 Borers Yard, Borers Arms Road, Copthorne, West Sussex, RH10 3LH, United Kingdom. + 44 (0) 1342 717102 + 44 (0) 1342 717014 [email protected] http://www.willow.co.uk W41FW2013 Primary axis inclined angle Frequency characteristics Page 3 of 5 Willow Technologies Ltd. Unit 3 Borers Yard, Borers Arms Road, Copthorne, West Sussex, RH10 3LH, United Kingdom. + 44 (0) 1342 717102 + 44 (0) 1342 717014 [email protected] http://www.willow.co.uk W41FW2013 Reflow Chart 1. Sensor output is defined by generated electrical charge. Please use this shock sensor with a non inverting voltage amplifier circuit. 2. Please do not apply DC voltage for this shock sensor. 3. Please contact Willow Technologies for washing conditions. Taping Dimensions (mm) Page 4 of 5 Willow Technologies Ltd. Unit 3 Borers Yard, Borers Arms Road, Copthorne, West Sussex, RH10 3LH, United Kingdom. + 44 (0) 1342 717102 + 44 (0) 1342 717014 [email protected] http://www.willow.co.uk W41FW2013 Reel dimensions (mm) Minimum Quantity 180mm Paper Tape 180mm Embossed Tape 2000 330mm Paper Tape 330mm Embossed Tape Bulk Case Bulk(Bag) Ammo Pack 320Reel Magazine Box Page 5 of 5 Willow Technologies Ltd. Unit 3 Borers Yard, Borers Arms Road, Copthorne, West Sussex, RH10 3LH, United Kingdom. + 44 (0) 1342 717102 + 44 (0) 1342 717014 [email protected] http://www.willow.co.uk W41FW2013