Part No: 4770 A1/2S Series Tip Over Switch – Mercury Features: * Un-Insulated * Form: NC/SPST/ Electrodes down * Angles Referenced from vertical * Double Electrode * Hermetically Sealed * Small Package Size * Low Contact Resistance * Long Life Shown in normally closed position. Tip over switches “break” when the electrode is tilted from the vertical and “make” when returned to the vertical. Must Make / Break Angle * : Maximum included Angle: Drawing dimensions in inches and (millimeters). As shown Application Dependent * from vertical 0º reference Switch Ratings: Max Switching Voltage: Max Switching Current: Initial Contact Resistance (Max): Stand Off Voltage (contact to contact): Operating Temperature: Storage Temperature: Typical number of operations at specified load: G-Force Activation G-Level/Range: Dimensions: Weight per 100pcs. Lbs / Kgs: Body Length (less leads). Inches / Millimeters: Maximum Diameter. Inches / Millimeters: Materials: Lead Wire Type: Lead wire length/skive/termination: Finish: © American Electronic Components Inc 2006 Specifications are subject to change without notice. E&OE. 12VDC 0.5A 3 Ohms max @ 5 VDC, 1mA 1kV AC -38º to 220ºF / -38º to 105ºC -40º to 356ºF / -40º to 180º C 10,000,000 N/A 0.33 / .015 0.25 / 6.35 0.31 / 7.87 N/A 0.42 / 10.59 Nickel American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: [email protected] http://www.aecsensors.com 4770 061908