Part No: T03-1016 T03 Series Tip Over Switch – Mercury Features: * Un-Insulated * Form: NC Vertical Mount as shown * Angles Referenced from vertical * Single Electrode * Hermetically Sealed * High Current Capacity * Small Package Size * Low Contact Resistance * Long Life Shown in normally closed position. Tip over switches “break” when the electrode is tilted from the vertical and “make” when returned to the vertical. Must Break Angle * : Maximum included Angle: Drawing dimensions in inches. 10º to 45º in any direction NA * from vertical 0º reference Switch Ratings: Max Switching Voltage: Max Switching Current: Initial Contact Resistance (Max): Stand Off Voltage (contact to contact): Operating Temperature: Storage Temperature: Typical number of operations at specified load: G-Force Activation G-Level/Range: Dimensions: Weight per 100pcs. Lbs / Kgs: Body Length (less leads). Inches / Millimeters: Maximum Diameter. Inches / Millimeters: Materials: Termination Type: Lead wire length/skive/termination: Finish: © American Electronic Components Inc 2006 Specifications are subject to change without notice. E&OE. 240VAC 12.5A/120V 60Hz resistive, 1/16 HP 120VAC, 1500W Tungsten Meets UL Heat Rise Specification 1240VAC -37º to 220º F / -38º to 105º C -40º to 356º F / -40º to 180º C 10,000,000 N/A 3.20 / 1.45 0.87 / 22.1 0.94 / 24.0 ¼” Male & ¼” Female Quick Connects per drawing NA Nickel American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: [email protected] http://www.aecsensors.com T03-1016 110706