Part No: T03-1002 T03 Series Tip Over Switch – Mercury Features: * Un-Insulated * Omni-directional * Form: NC/SPST/Mounted as shown * Angles Referenced from vertical * Single Electrode * Hermetically Sealed * Small Package Size * High Current Capability * Low Contact Resistance * Long Life Shown in normally closed position. Tip over switches “break” when the electrode is tilted from the vertical and “make” when returned to the vertical. Typical Break Angle * : Minimum Remake Angle * : Drawing dimensions in inches. 25º to 40º in any direction 10º * from vertical 0º reference Switch Ratings: Max Switching Voltage: Max Switching Current: Initial Contact Resistance (Max): Stand Off Voltage (contact to contact): Operating Temperature: Storage Temperature: Typical number of operations at specified load: G-Force Activation G-Level/Range: Dimensions: Weight per 100pcs. Lbs / Kgs: Body Length (less leads). Inches / Millimeters: Maximum Diameter. Inches / Millimeters: Materials: Lead Wire Type: Lead wire length/skive/termination: Finish: © American Electronic Components Inc 2006 Specifications are subject to change without notice. E&OE. 120V 12.5A, 1500W/120V resistive, 1/6hp 120V 25 milli Ohms 1240 VAC -38º to 220º F / -38º to 105º C -40º to 356º F / -40º to 180º C 3,000,000 N/A 3.20 / 1.45 0.463 / 11.76 0.943 / 23.95 N/A N/A Nickel American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: [email protected] http://www.aecsensors.com T03-1002 200606