620 North Lindenwood Drive Olathe, KS 66062 USA Tel: 913-829-1777 Fax: 913-829-9350 www.vectron.com http://www.viteonline.com Electrical Characteristics VCC1FIBR, VCC1FIB3 Oscillator Parameter Symbol Minimum 5.0 V Typical 3.3 V Maximum 5.0 V 3.3 V 106.25 Frequency Range f0 Operating Temperature Range T0 0 to 70 Storage Temperature TS -55 to 125 Stability Options Supply Voltage - V DD Supply Current Output Levels IDD High V OH Low V OL 2 4.5 3.0 4.5 5.0 - MHz °C 3.3 3.0 Unit 3.3 V °C ± 50 1 Output Rise/Fall Time 5.0 V 5.5 3.6 80 50 5 - tR/F PPM V mA V 0.5 0.3 1.5 1.5 0.8 0.5 V ns Tri-state (Input to Pin 1) Output Enable 4.0 2.0 - Output Disable (High Imp) Output Symmetry/Duty Cycle Start-up Time Output Load Options tSU V 55/45 - - 10 TTL or HCMOS, 15 or 50 pF V % ms - 1. Inclusive of calibration tolerance at 25°C, operating temperature, supply voltage, load, aging, shock and vibration. 2. Transition times are measured between 20% and 80% of VDD, with a maximum output load of 15 pF. Parameter Description Mechanical Shock MIL-STD 883 Method 2022.3, Test A Mechanical Vibration MIL-STD 883 Method 2007.1, Test A Temperature Cycle MIL-STD 883 Method 1010, Test A Gross Leak Test All units 100% leak tested in deionized water Fine Leak Test All units tested to MIL-STD 883, Method 1014 Resistance to Solvents MIL-STD-883, Method 2015 1