OX-170 Oven Controlled Crystal Oscillator OX-170 Features Applications • Reflow Process Compatible • AT-Cut and SC-Cut Crystal Options • Low Profile Compact Package • Previous Model: C4600 • Frequency Range: 5 MHZ to 80 MHZ • Base Stations • Test Equipment • Synthesizers • Military Communication Equipment • Digital Switching Performance Specifications Frequency Stabilities1 (AT-Cut Crystal-Standard) Parameter Min vs. operating temperature range (referenced to +25°C) Initial tolerance vs. supply voltage change vs. load change vs. aging/day vs. aging/1st year vs. aging/year (following years) Max Unit Condition -30 -80 -100 -200 +30 +80 +100 +200 ppb ppb ppb ppb 0 to +70°C -20 to +70°C -40 to +70°C -40 to +85°C -300 -5 -5 -2 -500 -250 +300 +5 +5 +2 +500 +250 ppb ppb ppb ppb ppb ppb at time of shipment, nominal EFC VS ±5% static Load ±5% static after 30 days of operation after 30 days of operation after 30 days of operation 5 minutes to ±100ppb of final frequency (1 hour reading) @ +25°C Warm-up time Typical Frequency Stabilities1 (SC-Cut Crystal-Option) vs. operating temperature range (referenced to +25°C) -10 -15 -20 -30 +10 +15 +20 +30 ppb ppb ppb ppb 0 to +70°C -20 to +70°C -40 to +70°C -40 to +85°C Initial tolerance vs. supply voltage change vs. load change vs. aging/day vs. aging/1st year vs. aging/year (following years) -0.1 -5 -5 -1 -100 -50 +0.1 +5 +5 +1 +100 +50 ppb ppb ppb ppb ppb ppb at time of shipment, nominal EFC VS ±5% static Load ±5% static after 30 days of operation after 30 days of operation after 30 days of operation 5 minutes to ±10ppb of final frequency (1 hour reading) @ +25°C Warm-up time Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Supply Voltage (Vs) Parameter Min Typical Max Unit Supply Voltage 3.135 3.3 3.465 VDC Supply Voltage 4.75 5.0 5.25 VDC Supply Voltage 11.4 12.0 12.6 VDC 3.5 1.0 Watts Watts Power Consumption Condition during warm-up steady state @ +25°C RF Output Signal [Standard] HCMOS Load 15 pF 0.4 0.5 Signal Level (Vol) Signal Level (Voh) 2.4 3.5 Duty Cycle 45 VDC VDC with Vs=3.3V and 15 pF Load with Vs=5V & 12V and 15 pF Load VDC VDC with Vs=3.3V and 15 pF Load with Vs=5V & 12V and 15 pF Load % @ (Voh-Vol)/2 55 Signal Sinewave Load 50 +2.0 +5.0 Output Power +5.0 +8.0 Ohms +8.0 +11.0 dBm dBm with Vs=3.3V and 50 Ohm load with Vs=5V & 12V and 50 Ohm load -30 dBc 50 Ohm load Harmonics Frequency Tuning (EFC) Tuning Range Fixed OCXO; No adjust ±6.0 ±0.75 Tuning Range ±12.0 ±2.0 ppm ppm 10 % 2.8 4.0 VDC VDC Linearity Tuning Slope with AT cut crystal with SC cut crystal Positive Control Voltage Range 0.0 0.0 1.4 2.0 with Vs=3.3V with Vs=5V & 12V Reference Voltage Output (VRef) Reference Voltage 2.75 3.92 4.9 2.8 4.0 5.0 2.85 4.08 5.1 VDC VDC VDC with Vs=3.3V with Vs=5V with Vs=12V Additional Parameters Phase Noise3 -90 -120 -140 -145 -150 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz @ 10MHz with SC cut Phase Noise3 -75 -105 -130 -140 -150 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz @ 10MHz with AT cut 25 g Weight Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Absolute Maximum Ratings Parameter Min Typical Max Unit Condition Supply Voltage (Vs) 6.5 15 V V with Vs=3.3V & 5V with Vs=12V Output Load 50 pF Operable Temperature Range -55 +85 °C Storage Temperature Range -55 +125 °C Outline Drawing / Enclosure Dimensions in mm Type A Code Height “H” Pin Length “L” Min 0 12.2 4.5 1 13.5 4.5 2 15.2 4.5 3 18.2 4.5 Pin Connections 1 Electronic Frequency Control Input (EFC) 2 No Connect / Reference Voltage Output 3 Supply Voltage Input (Vs) 4 RF Output 5 Ground (Case) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information OX - 170 0 - D A E - 258 0 - 10M0000000 Frequency Product Family OX: OCXO Frequency Control 0: No Tuning 1: ±0.75 to ±2.0ppm (SC) 2: ±6.0 to ±12.0ppm (AT) Package 25x38mm Height 0: A12.2 mm 1: A13.5 mm 2: A15.2 mm 3: A18.2 mm Stability Code 108: ±10ppb 158: ±15ppb 208: ±20ppb 258: ±25ppb 308: ±30ppb 508: ±50ppb 107: ±100ppb 207: ±200ppb Supply Voltage B: +12V D: +5V E: +3.3V RF Output Code A: HCMOS E: Sinewave Temperature Range D: -40°C to +70°C E: -40°C to +85°C J: -20°C to +70°C T: 0°C to +70°C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road, Suite 102 Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: Vectron International 68 Yin Cheng Road(C), 22nd Floor One LuJiaZui Pudong, Shanghai 200120, China Tel: +86 21 6194 6886 Fax: +86 21 6194 6699 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 2-18-14 jar Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com