OX-405 Oven Controlled Crystal Oscillator OX-405 Features • • • • • Applications 4-Pin Dip Fast Warm-up Frequency Range: 80 MHZ to 120 MHZ Low g-sensitivity Low Phase Noise • • • • Base Stations Test Equipment Synthesizers Military Communication Equipment Performance Specifications Frequency Stabilities1 (AT-Cut Crystal-Standard) Parameter Min vs. operating temperature range (referenced to +25°C) Initial tolerance vs. supply voltage change vs. load change vs. aging/day vs. aging/1st year Max Unit Condition -200 -350 -700 +200 +350 +700 ppb ppb ppb 0 to +70°C -20 to +70°C -40 to +85°C -0.5 -100 -10 -10 -500 +0.5 +100 +10 +10 +500 ppm ppb ppb ppb ppb at time of shipment, nominal EFC VS ±5% static Load ±5% static after 30 days of operation after 30 days of operation 3 minutes to ±100ppb of final frequency (1 hour reading) @ +25°C Warm-up time Typical Frequency Stabilities1 (SC-Cut Crystal-Option) vs. operating temperature range (referenced to +25°C) -100 -250 -500 +100 +250 +500 ppb ppb ppb 0 to +70°C -20 to +70°C -40 to +85°C Initial tolerance vs. supply voltage change vs. load change vs. aging/day vs. aging/1st year -0.2 -50 -10 -3 -300 +0.2 +50 +10 +3 +300 ppm ppb ppb ppb ppb at time of shipment, nominal EFC VS ±5% static Load ±5% static after 30 days of operation after 30 days of operation 3 minutes to ±100ppb of final frequency (1 hour reading) @ +25°C Warm-up time Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Supply Voltage (Vs) Parameter Supply Voltage Min Typical Max Unit 4.75 5.0 5.25 VDC 2.5 1.0 Watts Watts Power Consumption Condition during warm-up steady state @ +25°C RF Output Signal [Standard] HCMOS Load 15 pF Signal Level (Vol) 0.5 Signal Level (Voh) 4.7 Duty Cycle 40 VDC with Vs=5V and 15 pF Load VDC with Vs=5V and 15 pF Load % @ (Voh-Vol)/2 ±12.0 ±3.0 ppm ppm with AT cut crystal with SC cut crystal 5 % 4.0 VDC 60 Frequency Tuning (EFC) ±5.0 ±1.0 Tuning Range Linearity Tuning Slope Positive Control Voltage Range 0.0 2.0 Additional Parameters Phase Noise3 -95 -125 -145 -155 -160 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz G-Sensitivity 0.5 ppb/g 8 g Weight 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz worst direction Absolute Maximum Ratings Supply Voltage (Vs) 6.0 V Output Load 50 pF Operable Temperature Range -55 +85 °C Storage Temperature Range -55 +125 °C @ 100MHz Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Outline Drawing / Enclosure Dimensions in inches (mm) Dimensions in mm Type A (400) Type B (401) Code Height “H” Pin Length “L” Min Code Height “H” Pin Length “L” Min 0 9.3 5.85 0 10.4 NA 1 8.3 5.85 Pin Connections Pin Connections 1 Electronic Frequency Control Input (EFC) 1 Electronic Frequency Control Input (EFC) 7 Ground (Case) 7 Ground (Case) 8 RF Output 8 RF Output 14 Supply Voltage Input (VS) 14 Supply Voltage Input (VS) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Standard Shipping Method Enclosure Type Type B Tape width W [mm] 44 Quantity per meter 50 Quantity per reel Dimension P 300 Recommended Reflow Profile Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com 20 Ordering Information OX - 405 0 - D A E - 107 0 - 100M0000000 Frequency Product Family OX: OCXO Frequency Control 0: No Tuning 1: ±5.0 to ±12.0ppm (AT) 2: ±1.0 to ±3ppm (SC) Package 405 Stability Code 207: ±200ppb (AT Crystal) 357: ±350ppb (AT Crystal) 707: ±700ppb (AT Crystal) 107: ±100ppb (SC Crystal) 257: ±250ppb (SC Crystal) 507: ±500ppb (SC Crystal) Height 0: A9.3 mm (THT) 1: A8.3 mm (THT) 2: B10.4 mm Supply Voltage (SMD) D: +5V RF Output Code A: HCMOS Temperature Range E: -40°C to +85°C J: -20°C to +70°C T: 0°C to +70°C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Europe: Asia: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 7268.801.100 Fax: +49 (0) 7268.801.282 Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 5-20-10 drs Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com