UNISONIC TECHNOLOGIES CO., LTD L11815A CMOS IC 1.5A CMOS LDO DESCRIPTION The UTC L11815A is a COMS linear regulator. One of it’s feature is very low quiescent current typical as low as 45μA and its dropout voltage is extremely low with 1.5A output current. The internal circuit includes thermal shutdown and current fold-back mechanism to prevent device failure when the circuit is operated in the bad conditions. In application, the UTC L11815A needs a low noise, regulated supply. For stable operation, the output capacitance value should be 4.7μF or more. The UTC L11815A is an ideal for battery applications, such as instrumentations, portable electronics, wireless devices, PC peripherals, and battery powered widgets. The output voltage values are set during manufacturing and the accuracy is tighten 1.5%. FEATURES * Quiescent Current (45μA typ.) * Very Low Dropout Voltage * Guaranteed 1.5A output * Accuracy : ±1.5% * Over-Temperature ShutDown * With Current Limiting * Short Circuit Current Fold-Back * Low Temperature Coefficient ORDERING INFORMATION Ordering Number Lead Free Halogen Free L11815AG-xx-AA3-x-R L11815AL-xx-TA3-x-T L11815AG-xx-TA3-x-T L11815AL-xx-TN3-x-R L11815AG-xx-TN3-x-R L11815AL-xx-TQ2-x-R L11815AG-xx-TQ2-x-R L11815AL-xx-TQ2-x-T L11815AG-xx-TQ2-x-T Note: Pin Assignment: G:GND O:VOUT I:VIN xx: Output Voltage, refer to Marking Information. www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd Package SOT-223 TO-220 TO-252 TO-263 TO-263 Pin Assignment Packing A: GOI D: IGO Tape Reel Tube Tape Reel Tape Reel Tube 1 of 4 QW-R502-346.I L11815A CMOS IC MARKING INFORMATION PACKAGE VOLTAGE CODE MARKING Pin Code SOT-223 TO-252 TO-263 TO-220 15: 1.5V 18: 1.8V 19: 1.9V 25: 2.5V 28: 2.8V 33: 3.3V Voltage Code L11815AG XX 1 Pin Code Voltage Code 2 UTC L11815A XX Date Code 3 L: Lead Free G: Halogen Free Lot Code Date Code BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R502-346.I L11815A CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT Input Voltage VIN -0.3 ~ +8 V Output Voltage VOUT GND - 0.3 ~ VIN + 0.3 V Power Dissipation PD Internally limited Junction Temperature TJ 150 °C Operating Temperature TOPR - 40 ~ +85 °C Storage Temperature TSTG - 65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER SOT-223 Junction to Ambient TO-220/ TO-263 TO-252 SOT-223 Junction to Case TO-220/ TO-263 TO-252 SYMBOL RATINGS 140 62.5 103 15 4 12 θJA θJC UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (VIN = VO(Nom) +2V, TA = 25°C, unless otherwise specified.) PARAMETER Input Voltage Output Voltage Accuracy Line Regulation Load Regulation Output Current Current Limit Short Circuit Current Quiescent Current Ground Pin Current Dropout Voltage Over Temperature Shutdown Over Temperature Hysteresis Temperature Coefficient of Output Voltage Power Supply Rejection Output Voltage Noise Note: VIN(MIN)=VOUT+VD SYMBOL VIN VOUT ∆VOUT VOUT ∆VOUT VOUT IOUT ILIMIT ISC IQ IGND VD TEST CONDITIONS IO=1mA IOUT=1mA VIN=VOUT+1~ VOUT+2 VOUT<2.0V VOUT≥2.0V IOUT=1mA ~ 1500mA MIN Note -1.5 -0.15 -0.1 -1 1500 1500 VIN= VO(NOM)+1V, VOUT<0.4V IOUT=0mA IOUT=1mA ~ 1500mA VO(NOM)≤2.0V IOUT=1.5A VOUT=VO(NOM)-2.0% VO(NOM)>2.0V TYP 0.02 MAX 7 1.5 0.15 0.1 UNIT V % % % 0.2 1 % 2000 750 45 45 OTS OTH 150 30 TCVO 30 PSRR eN f=100Hz IOUT=100mA, CO=4.7µF f=1kHz f=10kHz f=10Hz ~ 100kHz, IOUT=10mA, Co=4.7µF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 70 50 20 30 mA mA mA 70 µA µA 1300 mV 800 mV °C °C ppm/° C dB dB dB µVRMS 3 of 4 QW-R502-346.I L11815A CMOS IC DETAILED DESCRIPATION The UTC L11815A of CMOS regulators insist of a PMOS pass transistor, voltage reference, error amplifier, over-current protection, and thermal shutdown. The error amplifier, over-current shutdown, and thermal protection circuits provides data for P-channel pass transistor. The error amplifier takes output voltage for a precision reference in the normal operation and the normal operation is restored when the junction temperature drops below 120°C.Over-current and Thermal shutdown circuits start to work when the junction temperature is higher than 150 °C, or the current exceeds 2.2A. The output voltage stays low when the thermal shutdown is in active. The UTC L11815A behaves like a current source when the load reaches 2.2A. But the current would fall back to 600mA to prevent excessive power loss when the load impedance value is below 0.3Ω.Normal operation is restored when the load resistance value is higher than 0.75 Ω. EXTERNAL CAPACITORS The UTC L11815A has an output capacitor to ground of 4.7μF or more in the stable operation. Ceramic capacitors can provide the lowest ESR with the best AC performance. Aluminum Electrolytic capacitors, in contrast, have the highest ESR with poorest AC response. Unfortunately, large value ceramic capacitors are comparatively expensive. So we can parallel a 0.1μF ceramic capacitor with a 10μF Aluminum Electrolytic. The result is low ESR, high capacitance, and low overall cost. A second capacitor is recommended between the input and ground to stabilize input voltage. To get an ideal effect the value of the input capacitor should be at least 0.1μF. All capacitors should be placed in close proximity to the pins. This can be achieved with a star connection. TYPICAL APPLICATION CIRCUIT VIN VIN L11815A VOUT VOUT GND C1=1µF C2=4.7µF UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R502-346.I