UNISONIC TECHNOLOGIES CO., LTD L1186 Preliminary CMOS IC 600mA CMOS LDO 4 5 DESCRIPTION The UTC L1186 is a COMS positive linear regulator. One of its features is the very low quiescent current typical as low as 30μA and its dropout voltage is extremely low with 600mA output current. The internal circuit includes thermal shutdown and current fold-back to prevent device failure when the circuit is operated in the bad conditions. In application, the UTC L1186 needs a low noise, regulated supply. For stable operation, the output capacitance value should be 2.2μF or more. The UTC L1186 is an ideal for battery applications, such as instrumentations, portable electronics, wireless devices, cordless phones, PC peripherals, and battery powered widgets. 1 2 3 SOT-25 1 SOP-8 FEATURES * Accurate to Within 1.5% * Quiescent Current: 30μA * Internal Over-Temperature Shutdown * With Current Limiting * Internal Short Circuit Current Fold-Back * With Noise Reduction Bypass Capacitor * Has Power-Saving Shutdown Mode * Very Low Temperature Coefficient ORDERING INFORMATION Ordering Number Lead Free Halogen Free L1186L-xx-AF5-R L1186G-xx-AF5-R L1186L-xx-S08-A-R L1186G-xx-S08-A-R L1186L-xx-S08-B-R L1186G-xx-S08-B-R Package Packing SOT-25 SOP-8 Tape Reel Tape Reel SOP-8 Tape Reel Note: xx: Output Voltage, refer to Marking Information. www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd 1 of 7 QW-R502-319.d L1186 Preliminary CMOS IC MARKING INFORMATION PACKAGE VOLTAGE CODE MARKING 3 2 1 L: Lead Free G: Halogen Free Voltage Code LSXX□ SOT-25 4 15 :1.5V 5 28 :2.8V AD:ADJ SOP-8 PIN CONFIGURATION VIN 1 VIN 1 8 VOUT GND 2 7 GND GND 3 6 GND EN 4 5 ADJ 5 VOUT GND 2 4 BYP/ADJ EN 3 SOT-25 SOP-8(A) SOP-8(B) PIN DESCRIPTION SOT-25 1 2 3 4 5 -- PIN NO SOP-8(A) 1 2,3,6,7 4 5 8 -- SOP-8(B) 8 3 5 2 1 4,6,7 PIN NAME DESCRIPTION VIN GND EN BYP/ADJ VOUT NC Input for voltage input. Ground. Enable pin. Noise Reduction Bypass Capacitor/ Adjusted Voltage Output voltage pin No connection UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 7 QW-R502-319.d L1186 Preliminary CMOS IC BLOCK DIAGRAM IN Overcurrent Shutdown Thermal Shutdown EN AMP + OUT Vref=1.215V GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw ADJ 3 of 7 QW-R502-319.d L1186 Preliminary CMOS IC ABSOLUTE MAXIMUM RATING Input Voltage Output Voltage PARAMETER SYMBOL VIN VOUT Output Current IOUT Power Dissipation SOT-25 SOP-8 Junction Temperature RATINGS 8 GND-0.3 ~ VIN+0.3 PD VIN - VOUT PD TJ TOPR Operating Temperature UNIT V V A 400 600 150 -40~+85 mW °C °C TSTG -65~+150 °C Storage Temperature Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER SYMBOL Junction to Ambient SOT-25 θJA SOP-8 Junction to Case (Note) SOT-25 θJC SOP-8 Note: θJC on center of molding compound if IC has on tab RATINGS 260 200 81 65 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (Ta = 25°C, unless otherwise noted.) Fixed Voltage PARAMETER Input Voltage Output Voltage Accuracy Line Regulation Load Regulation Output Current Current Limit Short Circuit Current Quiescent Current Ground Pin Current SYMBOL VIN VOUT ΔVOUT VOUT ΔVOUT VOUT IOUT ILIMIT ISC IQ IGND Power Supply Rejection EN Input Bias Current Shutdown Supply Current PG Leakage Current IOUT=1mA~600 mA 0.2 VOUT>1.2V 600 VOUT>1.2V 600 VOUT<0.8V IOUT=0mA IOUT=1mA~600mA IOUT =600mA 1.4V<VO(NOM)≤2.0V VOUT=VO(NOM)-2.0% 2.0V<VO(NOM)≤2.8V MAX 7 1.5 0.15 0.1 UNIT V % % % 1 % OTS OTH 150 30 TCVO 30 ppm/°C 75 55 30 dB dB dB 30 μVrms VD PSRR Output Voltage Noise EN Input Threshold IOUT=1mA 1.4V<VOUT≤2.0V IOUT=1mA VIN=VOUT+1~VOUT+2 2.0V<VOUT<4.0V MIN TYP Note1 -1.5 -0.15 -0.1 0.02 mA mA mA μA μA mV mV °C °C Dropout Voltage Over Temperature Shutdown Over Temperature Hysteresis Temperature Coefficient of Output Voltage TEST CONDITIONS eN VEH VEL IEH IEL ISD ILC f=1kHz IOUT =100mA COUT=2.2μF ceramic f=10kHz CBYP=0.01μF f=100kHz f=10Hz~100kHz, IOUT =10mA COUT=2.2μF , CBYP=0.1μF VIN=2.7V~7V VIN=2.7V~7V VEN=VIN, VIN=2.7V~7V VEN=0V, VIN=2.7V~7V VIN=5V, VOUT =0V, VEN<VEL VPG=7V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 800 300 30 35 600 50 1400 800 2.0 0 0.5 VIN 0.4 0.1 0.5 1 1 V V μA μA μA μA 4 of 7 QW-R502-319.d L1186 Preliminary CMOS IC ELECTRICAL CHARACTERISTICS (Cont.) Adjusted Voltage PARAMETER Input Voltage Reference Voltage Output Voltage Accuracy Line Regulation Load Regulation Output Current Current Limit Short Circuit Current Adjusted Current Ground Pin Current Dropout Voltage Over Temperature Shutdown Over Temperature Hysteresis Temperature Coefficient of Output Voltage Power Supply Rejection SYMBOL VIN VREF VOUT ΔVOUT VOUT ΔVOUT VOUT IOUT ILIMIT ISC IADJ IGND VD OTS OTH EN Input Bias Current Shutdown Supply Current PG Leakage Current Notes: 1. VIN(MIN)=VOUT+VD IOUT=1mA MIN TYP MAX Note1 7 1.196 1.215 1.234 -1.5 1.5 VIN=VOUT+VD~7V, IOUT=1mA -0.15 VIN=VOUT+VD , IOUT=1mA~600 mA VOUT>1.3V VOUT>1.3V VOUT<0.8V IOUT=0mA IOUT=1mA~600mA VOUT=VO(NOM)-2.0%, IOUT =600mA 0.2 600 600 PSRR eN VEH VEL IEH IEL ISD ILC f=1kHz IOUT =100mA COUT=2.2μF ceramic f=10kHz CBYP=0.01μF f=100kHz f=10Hz~100kHz, IOUT =10mA COUT=2.2μF , CBYP=0.1μF VIN=2.7V~7V VIN=2.7V~7V VEN=VIN, VIN=2.7V~7V VEN=0V, VIN=2.7V~7V VIN=5V, VOUT =0V, VEN<VEL VPG=7V UNIT V V % 0.15 % 1 % 150 30 mA mA mA μA μA mV °C °C 30 ppm/°C 40 20 15 dB dB dB 30 μVrms 800 300 30 35 600 50 600 TCVO Output Voltage Noise EN Input Threshold TEST CONDITIONS 2.0 0 0.5 VIN 0.4 0.1 0.5 1 1 V V μA μA μA μA 2. To prevent the Short Circuit Current protection feature from being prematurely activated, the input voltage must be applied before a current source load is applied. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 7 QW-R502-319.d L1186 Preliminary CMOS IC TYPICAL APPLICATION CIRCUIT Fixed Voltage INPUT 5V C1 1μF + VIN L1186 VOUT BYP GND EN OUTPUT C3 2.2μF C2 0.1μF Adjusted Voltage EN EN OUT OUT R1 IN IN + C1 1µF GND ADJ C2 100p C3 2.2µF R2 VOUT = 1.215 ( R1/R2 +1 ) C2 is unnecessary if R1 or R2 < 20 K R1 and R2 use resistance value within 1% accuracy for correct for correct VOUT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 7 QW-R502-319.d L1186 Preliminary CMOS IC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 7 QW-R502-319.d