UNISONIC TECHNOLOGIES CO., LTD 2N3906

UNISONIC TECHNOLOGIES CO., LTD
2N3906
PNP EPITAXIAL PLANAR TRANSISTOR
GENERAL PURPOSE
APPLIATION

FEATURES
* Collector-Emitter Voltage: VCEO=40V
* Complementary to UTC 2N3904

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
2N3906G-AB3-R
2N3906L-T92-B
2N3906G-T92-B
2N3906L-T92-K
2N3906G-T92-K
Note: Pin Assignment: B: Base C: Collector
E: Emitter

Package
SOT-89
TO-92
TO-92
Pin Assignment
1
2
3
B
C
E
E
B
C
E
B
C
Packing
Tape Reel
Tape Box
Bulk
MARKING
SOT-89
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
TO-92
1 of 3
QW-R201-028.E
2N3906

PNP EPITAXIAL PLANAR TRANSISTOR
ABSOLUTE MAXIMUM RATING ( TA=25°С, unless otherwise specified )
PARAMETER
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Collector Current
Base Current
RATINGS
UNIT
-40
V
-40
V
-5
V
-200
mA
-50
mA
SOT-89
550
Collector dissipation
PC
mW
TO-92
625
Junction Temperature
TJ
125
°С
Operating Temperature
TOPR
-20 ~ +85
°С
Storage Temperature
TSTG
-40 ~ +150
°С
Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

SYMBOL
VCBO
VCEO
VEBO
IC
IB
ELECTRICAL CHARACTERISTICS (TA=25°С, unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
Collector Cut-Off Current
ICEX
VCE=-30V, VEB=-3V
Base Cut-Off Current
IBL
VCE=-30V, VEB=-3V
Collector-Base Breakdown Voltage
VCBO IC=-10A, IE=0
Collector-Emitter Breakdown Voltage
VCEO IC=-1mA, IB=0 (Note)
Emitter-Base Breakdown Voltage
VEBO IE=-10A, IC=0
VCE=-1V, IC=-0.1mA
hFE1
hFE2
VCE=-1V, IC=-1mA
DC Current Gain (Note)
hFE3
VCE=-1V, IC=-10mA
hFE4
VCE=-1V, IC=-50mA
hFE5
VCE=-1V, IC=-100mA
Collector-Emitter Saturation Voltage VCE(SAT)1 IC=-10mA, IB=-1mA
(Note)
VCE(SAT)2 IC=-50mA, IB=-5mA
VBE(SAT)1 IC=-10mA, IB=-1mA
Base-Emitter Saturation Voltage
VBE(SAT)2 IC=-50mA, IB=-5mA
Transition Voltage
fT
VCE=-20V, IC=-10mA, f=100MHz
Output Capacitance
COB
VCB=-5V, IE=0, f=1MHz
Turn On Time
tON
VCC=-3V, VBE=-0.5V, IC=-10mA, IB1=-1mA
Turn Off Time
tOFF
IB1=1B2=-1mA
Note: Pulse test: PW<=300s, Duty Cycle<=2%
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
-40
-40
-6
60
80
100
60
30
-0.65
TYP MAX UNIT
-50
nA
-50
nA
V
V
V
300
-0.25
-0.4
-0.85
-0.95
250
4.5
70
300
V
V
MHz
pF
ns
ns
2 of 3
QW-R201-028.E
2N3906
PNP EPITAXIAL PLANAR TRANSISTOR
TYPICAL CHARACTERISTICS
Voltage, V(V)
Voltage, V(V)

UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R201-028.E