UNISONIC TECHNOLOGIES CO., LTD MMBTA05 Preliminary AMPLIFIER TRANSISTOR NPN MMBTA05 FEATURES * Collector-Emitter Voltage: VCEO=60V ORDERING INFORMATION Ordering Number Lead Free Halogen Free MMBTA05L-AL3-R MMBTA05G-AL3-R Note: Pin assignment: E: EMITTER, C: COLLECTOR, B: BASE Package SOT-323 Pin Assignment 1 2 3 B E C Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., LTD 1 of 3 QW-R206-099.a MMBTA05 Preliminary AMPLIFIER TRANSISTOR ABSOLUTE MAXIMUM RATING (TA=25℃, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Collector-base voltage VCBO 60 V Collector-emitter voltage VCEO 60 V Emitter-base voltage VEBO 4 V Collector current - Continuous IC 500 mA Power Dissipation, @TA=25℃ PD 150 mW Junction Temperature TJ 125 ℃ Storage Temperature TSTG -40 ~ +150 ℃ Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER SYMBOL RATINGS junction to ambient (Note) θJA 833 junction to case θJC 347 Note: θJA is measured with the device soldered into a typical printed circuit board. UNIT ℃/W ℃/W ELECTRICAL CHARACTERISTICS (TA=25℃, unless otherwise specified) PARAMETER OFF CHARACTERISTICS Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Collector cutoff current ON CHARACTERISTICS DC current gain SYMBOL V(BR)CEO V(BR)EBO ICEO ICBO hFE TEST CONDITIONS IC=1.0mA, IB=0(Note 1) IE=100μA, Ic=0 VCE=60V, IB=0 VCB=60V, IE=0 60 4 IC=10mA, VCE=1V IC=100mA, VCE=1V IC=100mA, IB=10mA IC=100mA, VCE=1V 100 100 Collector-emitter saturation voltage VCE(SAT) Base-emitter on voltage VBE(ON) SMALL-SIGNAL CHARACTERISTICS Current gain bandwidth product fT IC=10mA, VCE=2V, f=100MHz(Note 2) Note 1. Pulse test: PW<=300μs, Duty Cycle<=2% 2. fT is defined as the frequency at which IhfeI extrapolates to unity. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 100 TYP MAX UNIT 0.1 0.1 V V μA μA 0.25 1.2 V V MHz 2 of 3 QW-R206-099.a MMBTA05 Preliminary AMPLIFIER TRANSISTOR SWITCHING TIME TEST CIRCUIT TURN-ON TIME VCC -1.0V 5.0µs TURN-OFF TIME 100 VCC +VBB +40V +40V 100 RL OUTPUT +10V VIN 0 tr=3.0ns 5.0µF OUTPUT VIN RB S RL 6.0pF 5.0µF 100 RB S 6.0pF 100 5.0µs tr=3.0ns Figure 1. (Note: Total shunt capacitance of test jig and connectors for PNP test circuits, reverse all voltage polarities.) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R206-099.a