UNISONIC TECHNOLOGIES CO., LTD UPSLD01 Preliminary CMOS IC HIGH POWER FACTOR LINEAR CONSTANT CURRENT LED DRIVER DESCRIPTION UTC UPSLD01 is a high power factor linear constant current LED driver which is applied to LED lighting. Through the distinctive constant current control technology, it realizes that constant current accuracy is less than ±5% and output current is adjustable through external resistor. High power factor and low harmonic distortion are the particular features. The system is simple without transformer and electrolysis capacitor. Therefore, LED lighting batch job can be realized. HSOP-8 FEATURES * No transformer and high voltage electrolysis capacitor * Integrated high voltage startup power supply circuit * Adjustable output current, max 60mA * Inter-chip current deviation < ±5% * Efficiency: >90% * Power factor: >0.95 * THD<20% * Over temperature protection * Application system no EMI problems ORDERING INFORMATION Ordering Number UPSLD01G-SH2-R Package HSOP-8 Packing Tape Reel UPSLD01G-SH2-R (1)Packing Type (1) R: Tape Reel (2)Package Type (2) SH2: HSOP-8 (3)Green Package (3) G: Halogen Free and Lead Free MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 5 QW-R125-036.b UPSLD01 Preliminary CMOS IC PIN CONFIGURATION OUT4 1 8 GND OUT3 2 7 NC OUT2 3 6 NC OUT1 4 5 REXT PIN DESCRIPTION PIN NO. 1 2 3 4 5 6~7 8 PIN NAME OUT4 OUT3 OUT2 OUT1 REXT NC GND DESCRIPTION current output port 4 current output port 3 current output port 4 Power input and constant current output port 1 Output current setting port GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R125-036.b UPSLD01 Preliminary CMOS IC ABSOLUTE MAXIMUM RATING (Ambient temperature is 27°C if there is no special instruction) PARAMETER SYMBOL RATINGS UNIT ESD Voltage Withstand VESD >2000 V Operating Temperature TOPR -20~+125 °C Storage Temperature TSTG -40~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (Ambient temperature is 27°C if there is no special instruction) PARAMETER OUT1 Input Voltage Output Current REXT Port Voltage OUT1/ OUT2 Port Withstand Voltage OUT3/ OUT4 Port Withstand Voltage IOUT Accuracy Over-Temperature Protection Point SYMBOL VOUT1 IOUT VREXT VDS_BV1 VDS_BV2-4 dIOUT TSC UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS MIN TYP 10 VOUT1=VOUT4=10V IOUT1=IOUT2=0 IOUT3=IOUT4=0 IOUT=10~50mA 0.9 400 250 ±5 110 MAX 6.5 60 UNIT V mA V V V % °C 3 of 5 QW-R125-036.b UPSLD01 Preliminary CMOS IC FUNCTIONAL DESCRIPTION UTC UPSLD01 is constant current drive which integrates the functional module such as LED constant current control and OUT port high voltage drive. OUT1 port minimum input voltage is 6V (IOUT=20mA)and it can reach output current 10mA~60mA by external REXT resistor. Built-in LED constant current drive maintains LED current a high precision without impact of ambient temperature. The chip can achieve high efficiency and high power factor by opening four switches one by one. The chip output current is adjustable by REXT resistor IOUT=VREXT/R. Output current generated by four switches opening one by one is shown below: IOUT1=0.55V/R IOUT2=0.70V/R IOUT3=0.85V/R IOUT4=0.90V/R UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R125-036.b UPSLD01 CMOS IC TYPICAL APPLICATION CIRCUIT 38×2 24×2 11×2 10×2 VIN Vac UTC UPSLD01 5 REXT OUT1 4 6 NC OUT2 3 7 NC OUT3 2 30R 8 GND OUT4 1 Figure 1. UTC UPSLD01 Typical Application Circuit OUT4 1 8 GND UTC UPSLD01 OUT2 3 OUT3 2 DB1 MB6S 7 NC 90Vac~265Va LEDn LED(n+1) LEDm LED(m+1) LEDp LED(p+1) LEDq LED1 Group 2 Group 1 Group 3 Group 4 6 NC F1 VIN 1A/250V 5 REXT OUT1 4 OUT4 1 8 GND UTC UPSLD01 OUT2 3 OUT3 2 7 NC 6 NC LEDn LED(n+1) LEDm LED(m+1) LEDp LED(p+1) LEDq LED1 Group 2 Group 1 Group 3 Group 4 5 REXT OUT1 4 Preliminary Figure 2. UTC UPSLD01 Parallel Application Circuit UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R125-036.b