AZ2280 30 AMP MINIATURE POWER RELAY FEATURES • • • • • • • Quick-connect leads for contacts and coil 1 Form A, B and C contacts available AC and DC coils available Epoxy sealed versions available UL Class F (155°C) standard UL, CUR file E44211 VDE certificate 40027037 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) SPST (1 Form B) SPDT (1 Form C) Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 30 A 120 VAC Res. N.O. Ratings Resistive load: Operate Time 15 ms max. at nominal coil voltage Max. switched power: 840 W or 8310 VA Max. switched current: 30 A Max. switched voltage: 28 VDC or 277 VAC Release Time 10 ms max. at nominal coil voltage (with no coil suppression) Dielectric Strength (at sea level for 1 min.) 2500 Vrms coil to contact 1500 Vrms between open contacts Insulation Resistance 1000 megaohms min. at 20°C, 500 VDC 50% RH Dropout DC: > 10% of nominal coil voltage AC: > 20% of nominal coil voltage 1 Form A 1 Form B 1 Form C Max. switched power: 280 W or 4155VA Max. switched current: 15 A Max. switched voltage: 28 VDC or 277 VAC Max. switched power: 560 W or 8310 VA (N.O.) 280 W or 5540 VA (N.C.) Max. switched current: 30 A (N.O.) 20 A (N.C.) Max. switched voltage: 28 VDC or 277 VAC Ambient Temperature Operating -40°C (-40°F) to 85°C (185°F), DC coils -40°C (-40°F) to 70°C (158°F), AC coils Material Silver cadmium oxide [1], silver tin oxide [2] Vibration 1.5 mm DA at 10-55 Hz Resistance < 50 milliohm initially (24 V, 1A voltage drop method) Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, Quick Connects COIL Power At Pickup Voltage (typical) 500 mW, DC coil 1.4 VA, AC coil Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Max. Solder Temp. 270°C (518°F) Max. Continuous Dissipation 1.7 W at 20°C (68°F) ambient, DC coil 2.7 VA at 20°C (68°F) ambient, AC coil Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Temperature Rise 38°C (68°F) at nominal coil voltage Max. Immersion Time 30 seconds 155°C (311°F) Weight 36 grams Packing unit in pcs 40 per plastic tray / 240 per carton Max. Temperature NOTES 1. 2. 3. 4. 5. All values at 20°C (68°F) Relay may pull in with less than “Must Operate” value. AC coils are not VDE approved 18 VDC coil is not VDE approved. Specification subject to change without notice. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-08 AZ2280 CONTACTS Rated load UL Rated load VDE 1 Form A 30 A at 277 VAC, General Use, 6k cycles [1][2] 30 A at 28 VDC, resistive, 6k cycles [1] 28 A at 277 VAC, General Use, 100k cycles [1] 20 FLA / 60 LRA at 277 VAC, 30k cycles [1] 2 HP at 250 VAC [1][2] 1 HP at 125 VAC [1][2] 1 Form A, DC coils only 30 A at 250 VAC, resistive, 30k cycles [1] 15 A at 250 VAC, cos phi = 0.4, 100k cycles [1][2] 1 Form B, DC coils only 15 A at 250 VAC, resistive, 30k cycles [1] 1 Form C, (N.O.), DC coils only 30 A at 250 VAC, resistive, 30k cycles [1] 20 A at 250 VAC, resistive, 100k cycles [2] 1 Form B 15 A at 277 VAC, General Use, 6k cycles [1] 10 A at 28 VDC, resistive, 6k cycles [1] 10 FLA / 33 LRA at 277 VAC, 30k cycles [1] 0.5 HP at 250VAC [1] 0.25 HP at 125 VAC [1] 1 Form C, (N.C.), DC coils only 15 A at 250 VAC, resistive, 30k cycles [1] 10 A at 250 VAC, resistive, 100k cycles [2] 1 Form C, (N.O.) 30 A at 277 VAC, General Use, 6k cycles [1][2] 20 A at 277 VAC, General Use, 6k cycles [1] 20 A at 28 VDC, resistive, 6k cycles [1] 20 FLA / 60 LRA at 277 VAC, 30k cycles [1] 2 HP at 250 VAC [1][2] 1 HP at 125 VAC [1][2] Note: 18 VDC coil is not VDE approved. AC coils are not VDE approved. 1 Form C, (N.C.) 20 A at 277 VAC, General Use, 6k cycles [1][2] 10 A at 28 VDC, resistive, 6k cycles [1] 10 FLA / 33 LRA at 277 VAC, 30k cycles [1] 0.5 HP at 250 VAC [1][2] 0.25 HP at 125 VAC [1][2] RELAY ORDERING DATA COIL SPECIFICATIONS – DC Coil Nominal Coil VDC Must Operate VDC Max. Continuous VDC Nominal Current mA ± 10% Coil Resistance Ohm ± 10% ORDER NUMBER* 5 3.75 6.4 185 27 AZ2280-1AT-5DF 6 4.5 7.8 150 40 AZ2280-1AT-6DF 9 6.75 12.2 93 97 AZ2280-1AT-9DF 12 9.0 15.4 77 155 AZ2280-1AT-12DF 15 11.25 19.8 59 256 AZ2280-1AT-15DF 18 13.5 24.1 47 380 AZ2280-1AT-18DF 24 18.0 32.0 36 660 AZ2280-1AT-24DF 48 36.0 62.6 19 2,560 AZ2280-1AT-48DF COIL SPECIFICATIONS – AC Coil 50/60 Hz Nominal Coil VDC Must Operate VDC ORDER NUMBER* Max. Continuous VDC Nominal Coil Power VA Coil Resistance Ohm ± 10% 12 9.6 13.8 2.3 25 AZ2280-1AT-12AF 24 19.2 27.6 2.1 100 AZ2280-1AT-24AF 120 96.0 138.0 2.3 2,500 AZ2280-1AT-120AF 220 176.0 286.0 2.2 13,490 AZ2280-1AT-220AF 240 192.0 286.0 2.6 13,490 AZ2280-1AT-240AF 277 220.0 318.5 2.2 15,000 AZ2280-1AT-277AF * “1AT” denote silver cadmium oxide contacts. Substitute “1BT” in place of “1AT” for 1 Form B relay. Substitute “1CT” in place of “1AT” for 1 Form C relay. Substitute “1AET” or “1CET” in place of “1AT” or “1CT” for silver tin oxide contacts. Substitute “DEF” or “AEF” for epoxy sealed version. Add suffix “K ”at the end of order number for 0.11 x 0.02 [2.8 x 0.5] coil terminals. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-08 AZ2280 MECHANICAL DATA 1.08 (27.5) 1.09 (27.8) 3 x 0.25 x 0.032 [6.3 x 0.8] 1.27 1.98 1.71 (32.4) (50.2) (43.5) 2 x 0.187 x 0.02* [4.8 x 0.5] 0.14 (3.5) * "K" = 0.110 x .02 [2.8 x 0.5] WIRING DIAGRAMS (Top View) Form A Form B Form C 3 3 2 2 4 1 5 4 4 1 1 5 5 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-08