Product Specification

Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
(V ) Preliminary Specifications
( ) Final Specifications
Module
10.4 Inch Color TFT-LCD
Model Name
G104VN01 V0
Customer
Date
Approved by
Peter ML Lee
Checked &
Approved by
2007/04/09
Prepared by
Grace Hung
Note: This Specification is subject to change
without notice.
Date
2007/04/09
General Display Business Division /
AU Optronics corporation
G104VN01 V0 rev.0.1
1/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
Contents
1. Operating Precautions........................................................................................4
2. General Description ............................................................................................5
2.1 Display Characteristics ....................................................................................................5
2.2 Optical Characteristics .....................................................................................................6
3. Functional Block Diagram..................................................................................9
4. Absolute Maximum Ratings .............................................................................10
4. Absolute Maximum Ratings .............................................................................10
4.1 Absolute Ratings of TFT LCD Module ............................................................................10
4.2 Absolute Ratings of Environment ...................................................................................10
5. Electrical Characteristics .................................................................................11
5.1 TFT LCD Module ............................................................................................................ 11
5.2 Backlight Unit .................................................................................................................13
5.2 Backlight Unit .................................................................................................................13
6. Signal Characteristic ........................................................................................14
6.1 Pixel Format Image ........................................................................................................14
6.2 Scanning Direction .........................................................................................................14
6.3 Signal Description ..........................................................................................................15
6.4 The Input Data Format ...................................................................................................16
6.5 Interface Timing ..............................................................................................................17
6.6 Power ON/OFF Sequence .............................................................................................17
6.6 Power ON/OFF Sequence .............................................................................................18
7. Connector & Pin Assignment ..........................................................................19
7.1 TFT LCD Module: Input Connector ................................................................................19
7.2 Backlight Unit: Lamp Connector.....................................................................................19
7.3 Lamp Connector Pin Assignment ...................................................................................19
8. Reliability Test Criteria .....................................................................................20
9. Mechanical Characteristics..............................................................................21
9.1 LCM Outline Dimension (Front View) .............................................................................21
9.2 LCM Outline Dimension (Rear View)..............................................................................22
10. Label and Packaging.......................................................................................23
10.1 Shipping Label (on the rear side of TFT-LCD display) .................................................23
10.2 Carton Label.................................................................................................................23
11 Safety.................................................................................................................24
11.1 Sharp Edge Requirements ...........................................................................................24
11.2 Materials .......................................................................................................................24
11.3 Capacitors ....................................................................................................................24
11.4 National Test Lab Requirement ....................................................................................24
G104VN01 V0 rev.0.1
2/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
Record of Revision
Version and Date
0.1
Apr. 09, 2007
Page
All
Old description
First draft specification
New Description
-
G104VN01 V0 rev.0.1
3/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
1. Operating Precautions
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
Since front polarizer is easily damaged, please be cautious and not to scratch it.
Be sure to turn off power supply when inserting or disconnecting from input connector.
Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface.
Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
Do not open nor modify the module assembly.
Do not press the reflector sheet at the back of the module to any direction.
In case if a module has to be put back into the packing container slot after it was taken out from the
container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the
CCFL Reflector edge softly. Otherwise the TFT Module may be damaged.
At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example), do not twist
nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into
consideration that no bending/twisting forces are applied to the TFT Module from outside. Otherwise
the TFT Module may be damaged.
Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local ordinances or
regulations for disposal.
Small amount of materials having no flammability grade is used in the LCD module. The LCD module should
be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be
applied exemption.
The LCD module is designed so that the CCFL in it is supplied by Limited Current Circuit (IEC60950 or
UL1950). Do not connect the CCFL in Hazardous Voltage Circuit.
Severe temperature condition may result in different luminance, response time and lamp ignition voltage.
Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustion
and reduce luminance dramatically.
The data on this specification sheet is applicable when LCD module is placed in landscape position.
Continuous displaying fixed pattern may induce image sticking. It ’s recommended to use screen saver or
shuffle content periodically if fixed pattern is displayed on the screen.
G104VN01 V0 rev.0.1
4/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
2. General Description
G104VN01 V0 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD display, a driver circuit,
and a backlight system. The screen format is intended to support VGA (640(H) x 480(V)) screen and 262K colors
(RGB 6-bits). All input signals are TTL interface compatible. Inverter card of backlight is not included.
G104VN01 V0 is designed for industrial display applications.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 ℃ condition:
Items
Unit
Specifications
Screen Diagonal
[inch]
10.4
Active Area
[mm]
211.2(H) x 158.4(V)
Pixels H x V
Pixel Pitch
640x3(RGB) x 480
[mm]
0.33 x 0.33
Pixel Arrangement
R.G.B. Vertical Stripe
Display Mode
TN, Normally White
Nominal Input Voltage VDD
[Volt]
3.3V or 5V
Typical Power Consumption
[Watt]
6.7W (IRCFL=6.0mA)
All black pattern
Weight
[Grams]
490g(typ.)
Physical Size
[mm]
243.0(H)x 176.6(V) x 11.5(D)
Electrical Interface
1ch TTL
Surface Treatment
Anti-glare, Hardness 3H
Support Color
262K colors
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance
o
[ C]
[oC]
-30 to +80
-30 to +80
RoHS Compliance
G104VN01 V0 rev.0.1
5/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 ℃ (Room Temperature):
Item
Unit
Conditions
Min.
Typ.
Max.
[cd/m2]
IRCFL= 6mA
White Luminance
450
(center point)
Uniformity
5 points
%
75
Contrast Ratio
Response Time
Color Gamut
1, 2, 3
500
-
4
Rising
-
10
20
[msec]
Falling
-
25
30
[msec]
Rising + Falling
-
35
50
[degree]
[degree]
Horizontal
CR = 10
(Right)
(Left)
65
70
-
65
70
-
[degree]
[degree]
Vertical
CR = 10
(Upper)
(Lower)
50
55
-
Color / Chromaticity
Coordinates
(CIE 1931)
60
65
-
Red x
TBD
TBD
TBD
Red y
TBD
TBD
TBD
Green x
TBD
TBD
TBD
Green y
TBD
TBD
TBD
Blue x
TBD
TBD
TBD
Blue y
TBD
TBD
TBD
White x
0.28
0.31
0.34
White y
0.30
0.33
0.36
TBD
-
%
1
-
[msec]
Viewing Angle
Note
5
6
Note 1: Measurement method
Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture
1 ∘with 50cm viewing distance
Test Point
Center
Environment
< 1 lux
LCD
SR_3 or
equivalent
Measuring distance
Module Driving
G104VN01 V0 rev.0.1
6/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
Note 2: Definition of 5 points position (Display active area: 211.2mm (H) x 158.4mm (V))
W
W /4
W /4
W /4
W /4
H /4
1
2
H /4
3
H
H /4
4
5
H /4
Note 3: The luminance uniformity of 5 points is defined by dividing the minimum luminance values by the
maximum test point luminance
Minimum Brightness of five points
δW5 =
Maximum Brightness of five points
Note 4: Definition of contrast ratio (CR):
Contrast ratio (CR)=
Brightness on the “White” state
Brightness on the “Black” state
Note 5: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “White” to “Black”
(falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10%
and 90% of amplitudes. Please refer to the figure as below.
%
Tf
Tr
100
90
Optical
White
Black
White
response
10
0
G104VN01 V0 rev.0.1
7/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
Note 6: Definition of viewing angle
Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over a 180 ° horizontal and 180°
vertical range (off-normal viewing angles). The 180 ° viewing angle range is broken down as below: 90 ° (θ)
horizontal left and right, and 90 ° (Φ) vertical high (up) and low (down). The measurement direction is typically
perpendicular to the display surface with the screen rotated to its center to develop the desired measurement
viewing angle.
G104VN01 V0 rev.0.1
8/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
3. Functional Block Diagram
The following diagram shows the functional block of the 10.4 inch color TFT/LCD module:
G104VN01 V0 rev.0.1
9/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
4. Absolute Maximum Ratings
4.1 Absolute Ratings of TFT LCD Module
Item
Symbol
Min
Max
Unit
Logic Voltage
Supply Voltage
Vin
VDD
-0.3
0
VDD+0.3
5.5
[Volt]
[Volt]
4.2 Absolute Ratings of Environment
Item
Symbol
Min
Max
Unit
Operating Temperature
TOP
-30
+80
[ C]
Operation Humidity
HOP
5
90
[%RH]
Storage Temperature
TST
-30
+80
[ C]
Storage Humidity
HST
5
90
[%RH]
o
o
o
Note: Maximum Wet-Bulb should be 39 C and no condensation.
G104VN01 V0 rev.0.1
10/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Symbol
Parameter
Min
Typ
Max
VDD
Logic/LCD Drive
Voltage
3.0
3.3
3.6
4.5
5.0
5.5
IDD
VDD Current
-
220
240
-
144
160
-
0.73
0.9
0.8
0.73
0.8
-
100
Irush
LCD Inrush Current
PDD
VDD Power
VDDrp
-
Allowable Logic/LCD
Drive Ripple Voltage
-
Units
Remark
[Volt]
[mA]
All Black Pattern(VDD=3.3V)
All Black Pattern(VDD=5V)
[A]
Note 1
All Black Pattern(VDD=3.3V)
[Watt]
All Black Pattern(VDD=5V)
[mV]
p-p
All Black Pattern
(VDD=3.3V/5V)
Note 1: Irush current measurement condition when LCD supplies 3.3V:
+3.3V
Q3
AO6402
D6
D5
D2
D1
F1
S
(LCD Module Input)
G
R1
47K
VCC
VDD
C1
1uF/16V
D1
D2
D5
D6
(High to Low)
Control
Signal
Q3
AO6402
R2
S
G
1K
2
C3
+12.0V
SW1
1
SW MAG-SPST
VR1
R2
0.01uF/25V
47K
1K
C2
1uF/25V
3.3
90%
10%
0
0.5ms
VDD rising time
G104VN01 V0 rev.0.1
11/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
Symbol
Item
Min.
Typ.
Max.
Unit
VIH
High Input Voltage
0.7VDD
-
VDD
[Volt]
VIL
Low Input Voltage
-
-
0.3VDD
[Volt]
Remark
G104VN01 V0 rev.0.1
12/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
5.2 Backlight Unit
5.2.1 Parameter guideline for CCFL
Following characteristics are measured under a stable condition using an inverter at 25 ℃(Room Temperature):
Symbol
IRCFL
FCFL
ViCFL
o
(25 C)
(reference)
VCFL
Parameter
Min.
Typ.
Max.
CCFL operation range
4.5
6.0
7.0
CCFL Frequency
40
50
60
[KHz]
(Ta=25 C) Note 3
-
-
TBD
[Volt]
rms
(Ta=25 C)
440
490
540
[Volt]
rms
(Ta=25 C) Note 4
IRCFL=6mA
-
5.88
-
[Watt]
(Ta=25 C) Note 4
IRCFL=6mA
Hrs
(Ta=25 C) Note 2
IRCFL= 6mA
CCFL Ignition Voltage
CCFL Discharge Voltage
Remark
o
(Ta=25 C) Note 1, 2
o
o
o
o
CCFL Power consumption
PCFL
Unit
[mA]
rms
(inverter excluded)
o
50,000
Lamp Life
Note 1: IRCFL is defined as the return current of an inverter. (In Figure. 1)
+
Hi
Lamp
Inverter
-
mA
Lo
(Figure. 1: Measurement of return current)
A stable IRCFL is a current without flicker or biasing waveform provided by inverter that ensures the
backlight perform to its specification. The ideal sine waveform should be symmetric in positive and
negative polarities and the asymmetry rate of the inverter waveform should be below 10%.
It is recommended to use the inverter with detection circuit to avoid overvoltage, overcurrent, or
mismatching waveform. The purpose is to avoid current flow into only one of the lamps when the other
one is not in operation.
Note 2: The definition of lamp life means when any of following conditions happen:
a) Luminance falls to 50% or less of the initial value.
b) Normal lighting is no more available (flickering, pink lighting, no lighting, etc.)
c) Lamp voltage or lighting start voltage exceeds the specified value.
Note 3: CCFL frequency should be carefully determined to avoid interference between inverter and TFT LCD.
Higher frequency will induce higher leakage current and further impact lamp life.
Note 4: Calculator value for reference (IRCFLxVCFLx2=PCFL).
Note 5: The display is with dual lamp design, and the CCFL current in above table refers to each lamp
G104VN01 V0 rev.0.1
13/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship between input signal and LCD pixel format.
st
1
2
Pixel
nd
639
Pixel
th
th
640
Pixel
Pixel
st
1
R
G
B
R
G
B
R
G
B
R
G
B
R
G
B
R
G
B
R
G
B
R
G
B
Line
480
th
Line
6.2 Scanning Direction
The following figures show the image seen from the front view. The arrow indicates the direction of scan.
Fig. 1 Normal scan (DPSH = High, DPSV=Low)
Fig. 3 Reverse scan (DPSH = High, DPSV=High)
Fig. 2 Reverse scan (DPSH = Low/NC, DPSV=Low)
Fig. 4 Reverse scan (DPSH = Low, DPSV=High)
G104VN01 V0 rev.0.1
14/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
6.3 Signal Description
Pin no
Symbol
Function
1
GND
2
CK
3
Hsync
Horizontal synchronous signal
4
Vsync
Vertical synchronous signal
5
GND
Ground
6
R0
RED data signal(LSB)
7
R1
RED data signal
8
R2
RED data signal
9
R3
RED data signal
10
R4
RED data signal
11
R5
RED data signal (MSB)
12
GND
13
G0
GREEN data signal (LSB)
14
G1
GREEN data signal
15
G2
GREEN data signal
16
G3
GREEN data signal
17
G4
GREEN data signal
18
G5
GREEN data signal (MSB)
19
GND
20
B0
BLUE data signal (LSB)
21
B1
BLUE data signal
22
B2
BLUE data signal
23
B3
BLUE data signal
24
B4
BLUE data signal
25
B5
BLUE data signal(MSB)
26
GND
Ground
27
ENAB
Signal to settle the horizontal display position
28
VDD
+3.3V / +5.0V power supply
29
VDD
+3.3V / +5.0V power supply
30
DPSH
Horizontal reverse scan control signal
31
DPSV
Vertical reverse scan control signal
Etc.
Ground
Clock signal for sampling each data signal
Ground
Ground
G104VN01 V0 rev.0.1
15/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
6.4 The Input Data Format
G104VN01 V0 rev.0.1
16/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
6.5 Interface Timing
6.5.1 Timing Characteristics
Signal
Clock Timing
Vsync Timing
Parameter
Clock Frequency
Vertical Section
Hsync Timing Horizontal Section
Symbol
1/ T Clock
Min.
20
Typ.
25.2
Max.
40
Period
TV
520
525
622
Active
T VD
480
480
480
Blanking
T VB
40
45
142
Period
TH
770
800
1070
Active
T HD
640
640
640
Blanking
T HB
130
160
430
Unit
MHz
Remark
Note1, Note2
T Line
Note1, Note2
TClock
Note1, Note2
Note 1: Frame rate is 60 Hz
Note 2: DE mode
6.5.2 Input Timing Diagram
Input Timing Definition ( DE Mode)
TCLOCK
DOTCLK
Input
Data
Invaild
Data
Pixel
1
Pixel
2
Pixel
3
Pixel
N-1
Pixel
N
Invaild
Data
Pixel
1
DE
THB
THD
TH
DE
TVB
TVD
TV
G104VN01 V0 rev.0.1
17/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
6.6 Power ON/OFF Sequence
VDD power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from any
system shall be Hi-Z state or low level when VDD is off.
T1
90%
90%
10
10%
Power Supply VDD
T5
T2
T6
T7
VALID
DATA
TTL Signal
T3
T4
Backlight On
Power ON/OFF sequence timing
Value
Parameter
Units
Min.
Typ.
Max.
T1
0.5
-
10
ms
T2
0
-
50
ms
T3
180
-
-
ms
T4
180
-
-
ms
T5
0
-
50
ms
T6
0
-
10
ms
T7
500
-
-
ms
The above on/off sequence should be applied to avoid abnormal function in the display.
Please make sure to
turn off the power when you plug the cable into the input connector or pull the cable out of the connector.
G104VN01 V0 rev.0.1
18/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
7. Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.
7.1 TFT LCD Module: Input Connector
Connector Name / Designation
Signal Connector
Manufacturer
Hirose or compatible
Connector Model Number
HRS DF9B-31P-1V or compatible
Adaptable Plug
HRS DF9B-31S-1V or compatible
7.2 Backlight Unit: Lamp Connector
Connector Name / Designation
Lamp Connector
Manufacturer
JST or compatible
Connector Model Number
BHS-03VS-1 or compatible
Mating Model Number
B-BHS-1-TB or compatible
7.3 Lamp Connector Pin Assignment
CN2 connector (backlight): BHS-03VS-1
Pin #
Symbol
Cable color
Signal Name
Pink
CCFL power supply(H.V.)
1
H
2
NC
3
L
White
CCFL power supply(GND)
Pin #
Symbol
Cable color
Signal Name
1
H
Blue
CCFL power supply(H.V.)
2
NC
3
L
No connection
No connection
Black
CCFL power supply(GND)
G104VN01 V0 rev.0.1
19/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
8. Reliability Test Criteria
Items
Required Condition
Temperature
40oC/90%,300Hr
Humidity Bias
High Temperature
o
80 C,300 hours (center point of panel surface)
Operation
Low Temperature
o
-30 C,300 hours
Operation
Note
Hot Storage
80 oC,300 hours
Cold Storage
-30 C,300 hours
Thermal Shock
Test
-30 C /30 min ,80 C /30 min ,100cycles, 40 C minimun ramp rate
Hot Start Test
80 C /1 Hr min. power on/off per 5 minutes, 5 times
Cold Start Test
-30 C /1 Hr min. power on/off per 5 minutes, 5 times
Shock Test
(Non-Operating)
50G,20ms,Half-sine wave,(+-X,+-Y,+-Z)
o
o
o
o
o
Vibration Test
(Non-Operating)
1.5G, 10~200~10Hz, Sine wave
On/off test
On/10 sec, Off/10 sec, 30,000 cycles
ESD
o
30mins/axis, 3 direction (X, Y, Z)
Contact : ± 8KV/ operation, Class B
Air : ± 15KV / operation, Class B
EMI
Note 1
30-230 MHz, limit 40 dBu V/m, 230-1000 MHz, limit 47 dBu V/m
Note1: According to EN61000-4-2 , ESD class B: Some performance degradation allowed. No data lost
.
Self-recoverable. No hardware failures.
G104VN01 V0 rev.0.1
20/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
9. Mechanical Characteristics
9.1 LCM Outline Dimension (Front View)
G104VN01 V0 rev.0.1
21/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
9.2 LCM Outline Dimension (Rear View)
G104VN01 V0 rev.0.1
22/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
10. Label and Packaging
10.1 Shipping Label (on the rear side of TFT-LCD display)
10.2 Carton Label
G104VN01 V0 rev.0.1
23/24
Product Specification
G104VN01 V0
AU OPTRONICS CORPORATION
11 Safety
11.1 Sharp Edge Requirements
There will be no sharp edges or comers on the display assembly that could cause injury.
11.2 Materials
Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are
used, they will be reviewed and approved by the responsible AUO toxicologist.
11.3 Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep them
from being inserted backwards.
11.4 National Test Lab Requirement
The display module will satisfy all requirements for compliance to:
UL 60950
U.S.A. Information Technology Equipment
G104VN01 V0 rev.0.1
24/24