AZ9371 SENSITIVE SUBMINIATURE RELAY FEATURES • • • • • • • • • Thin vertical profile, only 7 mm wide High sensitivity, 113 mW pickup Dielectric strength 4000 Vrms > 5,5 mm clearance and creepage 5 Amp switching capability (version “T” 10 Amp) Two different footprints available Reinforced insulation (VDE 0700, 0631) UL, CUR file E44211 VDE certificate 40030746 CONTACTS Arrangement SPST (1 Form A) Ratings Resistive load: Max. switched power: (Version “T”: Max. switched current: (Version “T”: Max. switched voltage: 150 W or 1385 VA 300 W or 2770 VA) 5A 10 A) 30 VDC* or 277 VAC * Note: If switching voltage is greater than 30 VDC, GENERAL DATA Life Expectancy Mechanical Minimum operations 5 million operations Standard version Electrical special precautions must be taken. Please contact the factory. 1 x 105 at 5 A, 250 VAC res. [1] 5 x 104 at 5 A, 250 VAC res. [2] Rated Load UL VDE Standard version 5 A at 277 VAC, resistive, 85°C, 50k cycles [1][2] 5 A at 30 VDC, resistive, 85°C, 50k cycles [1][2] 3 A at 277 VAC, resistive, 85°C, 120k cycles [1][2] 3 A at 30 VDC, resistive, 85°C, 120k cycles [1][2] B300 [2] R300 [2] High capacity version “T” Electrical 1 x 105 at 7 A, 250 VAC res. [1] 1 x 104 at 10 A, 250 VAC res. [1][2] 3 x 104 at 7 A, 250 VAC res. [2] Operate Time (typical) 6 ms at nominal coil voltage High capacity version “T” 10 A at 277 VAC, resistive, 85°C, 10k cycles [1][2] 10 A at 30 VDC, resistive, 85°C, 10k cycles [1][2] 7 A at 277 VAC, resistive, 85°C, 60k cycles [2] 7 A at 277 VAC, resistive, 105°C, 50k cycles [1] 7 A at 30 VDC, resistive, 85°C, 60k cycles [2] 7 A at 30 VDC, resistive, 105°C, 50k cycles [1] Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) Dielectric Strength (at sea level for 1 min.) 4000 Vrms coil to contact 1000 Vrms between open contacts Surge Voltage Coil to contact 10,000 V (at 1.2x50 µs) Standard version 5 A at 250 VAC, resistive, 85°C, 50k cycles [1][2] 5 A at 30 VDC, resistive, 85°C, 30k cycles [1][2] 4 A at 250 VAC. cos phi 0.4, 70°C, 100k cycles [1] 3A (51A) at 250VAC, capacitive, 85°C, 10k cycles [2]* Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 85°C (185°F) Vibration 0.062" (1.5 mm) DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 3 grams High capacity version “T” 10 A at 250 VAC, resistive, 85°C, 10k cycles [1][2] 10 A at 30 VDC, resistive, 85°C, 10k cycles [1][2] 7 A at 250 VAC, resistive, 105°C, 50k cycles [1] 7 A at 250 VAC, resistive, 85°C, 50k cycles [2] 7 A at 30 VDC, resistive, 105°C, 50k cycles [1] 7 A at 30 VDC, resistive, 85°C, 50k cycles [2] * duty factor: 2 seconds on / 15 seconds off Material Silver nickel [1], silver tin oxide [2], gold plating available Resistance < 100 milliohms initially (at 6 V, 1 A, voltage drop method) ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-25 AZ9371 COIL Power At Pickup Voltage (typical) 113 mW NOTES Max. Continuous Dissipation 750 mW at 20°C (68°F) ambient Temperature Rise 26°C (47°F) at nominal coil voltage Temperature 1. All values at 20°C (68°F) 2. Relay may pull in with less than “Must Operate” value. 3. Mounting position “terminals upside” is not recommended, if an electrical or mechanical life of > 100,000 operations is required. 4. Specifications subject to change without notice. Max. 105°C (221°F) RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC Must Operate VDC Max. Continuous VDC Coil Resistance Ohm ± 10% 3 2.25 5.8 45 AZ9371-1A-3D 5 3.75 9.7 125 AZ9371-1A-5D 6 4.50 11.6 180 AZ9371-1A-6D 9 6.75 17.4 405 AZ9371-1A-9D 12 9.00 23.2 720 AZ9371-1A-12D 18 13.50 34.8 1,620 AZ9371-1A-18D 24 18.00 46.5 2,880 AZ9371-1A-24D ORDER NUMBER * “1A” denote silver nickel contacts. Add suffix “E” to “1A” for silver tin oxide contacts. Add suffix “T” after “AZ9371” for high capacity version. Add suffix “E” for sealed version. Add suffix “K” for different footprint Add suffix “G” at the end of order number for gold plated contacts. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-25 AZ9371 MECHANICAL DATA Standard Pinning Outline Dimensions Version"K" Pinning Outline Dimensions 0.3 + 0.15 - 0.1 0.3 + 0.15 - 0.1 15.3 ± 0.3 3.4 ± 0.3 0.3 3.4 ± 0.3 0.3 15.3 ± 0.3 7.2 max 20.5 max 7.2 max 20.5 max + 0.2 11.5 7.0 0.8 Ø 0.4 - 0.05 0.3 + 0.15 - 0.1 0.3 4.7 + 0.2 0.8 Ø 0.4 - 0.05 15 3.5 PC BOARD LAYOUT + 0.15 - 0.1 4.7 PC BOARD LAYOUT 7 4.7 4 x ø 1.1 4.7 4 x ø 1.1 3.5 11.5 15 Viewed toward terminals Viewed toward terminals WIRING DIAGRAM WIRING DIAGRAM 13 7 5 5 1 7 Viewed toward terminals 13 1 Viewed toward terminals Attention! Grid is not 0.1” (2.54 mm)!! ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-25