G057QN01 V0 □ Preliminary Specification ■ Final Specification Module 5.7 Inch Color TFT-LCD Model Name G057QN01 V0 Customer Date Approved by Debbie Chiu Checked & Approved by 2008/08/04 Prepared by David Hsing Note: This Specification is subject to change without notice. Date 2008/06/20 General Display Business Division / AU Optronics corporation G057QN01 V0 Ver. 1.0 1/22 G057QN01 V0 Contents 1. Operating Precautions .....................................................................................4 2. General Description..........................................................................................5 2.1 Display Characteristics.......................................................................................................5 2.2 Optical Characteristics .......................................................................................................6 3. Functional Block Diagram................................................................................8 4. Absolute Maximum Ratings .............................................................................9 4.1 Absolute Ratings ................................................................................................................9 4.2 Absolute Ratings of Environment .......................................................................................9 5. Electrical Characteristics ...............................................................................10 5.1 TFT-LCD Driving ..............................................................................................................10 5.2 Backlight Unit Driving ....................................................................................................... 11 6. Signal Characteristic ......................................................................................12 6.1 Pixel Format Image ..........................................................................................................12 6.2 Scanning Direction ...........................................................................................................12 6.3 The Input Data Format .....................................................................................................13 6.4 TFT- LCD Interface Signal Description.............................................................................14 6.5 TFT- LCD Interface Timing ...............................................................................................15 6.6 LED Backlight Unit Interface Signal Description ..............................................................16 6.7 Power ON/OFF Sequence ...............................................................................................16 7. Connector & Pin Assignment.........................................................................17 7.1 TFT- LCD Signal (CN1): LCD Connector .........................................................................17 7.2 LED Backlight Unit (CN2): Backlight Connector...............................................................17 7.3 PIN 1 definition of CN1 and CN2 .....................................................................................18 8. Reliability Test Criteria ...................................................................................18 9. Mechanical Characteristics............................................................................20 10. Label and Packaging ....................................................................................21 10.1 Shipping Label (on the rear side of TFT-LCD display) ...................................................21 10.2 Carton Package .............................................................................................................21 11 Safety..............................................................................................................22 11.1 Keen Edge Requirements ..............................................................................................22 11.2 Materials .........................................................................................................................22 11.3 Capacitors ......................................................................................................................22 11.4 National Test Lab Requirement ......................................................................................22 G057QN01 V0 Ver. 1.0 2/22 G057QN01 V0 Record of Revision Version and Date Page 0.1, Oct. 04, 2007 0.2, Nov.20, 2007 All Old description Typical Power Consumption Add “The most suitable view angle:12 o’clock” Add “VF typical specification” Add “Note 1” Pin 3: NC Pin 4: NC 2D drawing update Add” Suggested applying torque: 0.15~0.2 Nm“ Typical Power Consumption 2.19W (LCD:0.69W/LED BLU: 1.5W) 1.57W (LCD:0.37W/LED BLU: 1.2W) Section 2.1 Revise Optical Characteristics Section 2.2 5 No description 11 No description 16 Pin 3: Hsync Pin 4: Vsync 5 6 9 10 11 17 17 21 Remark First edition preliminary specifications 19 1.0, Jun.19, 2008 New Description Absolute Ratings Absolute Ratings IF: Max.=30mA VR: Max.= No definition IR: Max.= No definition IF: Max.=20mA VR: Max.=5V IR: Max.=100μA Section 2.1 Section 5.2.1 Section 7.1 Section 9 Section 4.1 Power Specification Power Specification IDD: Typ.=210mA PDD: Typ.=0.69W IDD: Typ.=115mA, Max.=130mA PDD: Typ.=0.37W, Max.=0.43W Parameter guideline for LED Parameter guideline for LED IF: Max.= No definition VF: Typ.= 27.6V (IF=15mA, Ta=-30 oC) VF: Typ.= 26.4V, Max.= TBD (IF=15mA, Ta=25 oC) VF: Typ.= 25.2V (IF=15mA, Ta=85 oC) Operating life: Min.=20000 hrs, Typ.=40000 hrs IF: Max.=20mA VF: Typ.= 28.0V (IF=15mA, Ta=-30 oC) VF: Typ.= 26.8V, Max.=32.0V (IF=15mA, Ta=25 oC) VF: Typ.= 26.1V (IF=15mA, Ta=85 oC) Operating life: Min.=25000 hrs, Typ.=50000 hrs LCD Connecter LCD Connecter Manufacture: Hirose or compatible Mating Connecter Model Number: FH12-33S-0.5SH (55) Manufacture: Starconn or compatible Mating Connecter Model Number: 089H33-000100-G2-R Backlight Connecter Backlight Connecter Manufacture: JST or compatible Connecter Model Number: SHLP-06V-S-B or compatible Manufacture: STM or compatible Connecter Model Number: P24021P6 or compatible Pin #4 color: Blue Pin #5 color: White Carton Package Pin #4 color: White Pin #5 color: Blue Carton Package Max. capacity: No definition Max. weight: No definition Max. capacity: 60 pcs TFT-LCD module per carton Max. weight: 12.65 Kg per carton Section 5.1.1 Section 5.2.1 Section 7.1 Section 7.2 Section 10.2 G057QN01 V0 Ver. 1.0 3/22 G057QN01 V0 1. Operating Precautions 1) Display area (Polarizer) of TFT-LCD Module is easily to be damaged, please be cautious and not to scratch it. 2) Be sure to power off your machine before connecting or disconnecting your signal cable to TFT-LCD Module. 3) Wipe off water drop on display area immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth. 5) Display area (Glass) of TFT-LCD Module may be broken or cracked if bump Module against hard object. 6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling TFT-LCD Module. 7) Do not open nor modify the TFT-LCD module assembly. 8) Do not press the reflector sheet at the back of the module to any direction. 9) In case if TFT-LCD module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the LED Reflector edge. Instead, press at the far ends of the LED Reflector edge softly. Otherwise the TFT-LCD Module may be damaged. 10) When inserting or removing of your signal cable to TFT-LCD Module, be sure not to apply abnormal force (rotate, tilt…etc.) to the Connector of the TFT-LCD Module. 11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short time. Please design your display product well to avoid external force applying to module by end-user directly. 12) Small amount of materials without flammability grade are used in the TFT-LCD module. The TFT-LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. 13) Severe temperature condition may result in different luminance, response time. 14) Continuous operating TFT-LCD Module under high temperature environment may accelerate LED light bar exhaustion and reduce luminance dramatically. 15) The data on this specification sheet is applicable when TFT-LCD module is placed in landscape position. 16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen saver or moving content periodically if fixed pattern is displayed on the screen. G057QN01 V0 Ver. 1.0 4/22 G057QN01 V0 2. General Description G057QN01 V0 is designed for industrial display applications with QVGA (320 x RGB x 240) resolution and 262k colors (RGB 6-bits). It is composed of a TFT-LCD panel, driver ICs, control and power supply circuits board and backlight unit. G057QN01 V0 offers CMOS interface for display signal input. LED driving board for backlight unit is not included. 2.1 Display Characteristics The following items are G057QN01 V0 characteristics summary at 25 ℃(Room Temperature). Items Unit Specifications Screen Diagonal inch 5.7 Active Area mm 115.2(H) x 86.4(V) Pixels H x V Pixel Pitch 320 x 3(RGB) x 240 mm 0.36 x 0.36 Pixel Arrangement R.G.B. Vertical Stripe Display Mode TN, Normally White Nominal Input Voltage VDD Volt 3.3 typ. Typical Power Consumption Watt 1.57W (LCD:0.37W/LED BLU: 1.2W) All black pattern Weight Physical Size Grams mm 155g (typ.), 170g (max.) 144.0(H)x 104.6(V) x 12.3(D) (typ.) Electrical Interface CMOS 6-bit Parallel RGB Surface Treatment Anti-Glare, Hardness 3H Support Color 262K colors The most suitable view angle 12 o’clock Temperature Range Operating Storage (Non-Operating) RoHS Compliance o C C o -30 to +85 -30 to +85 RoHS Compliance G057QN01 V0 Ver. 1.0 5/22 G057QN01 V0 2.2 Optical Characteristics ℃ (Room Temperature). The optical characteristics are measured under stable conditions at 25 Item Unit White Luminance cd/m2 Uniformity Conditions IF= 15mA / 1 LED line (center point) Contrast Ratio Viewing Angle Max. Remark 300 400 - Note 1 - 1.3 500 800 - msec Rising - 15 20 msec Falling - 10 15 msec Rising + Falling - 25 35 degree degree Horizontal CR = 10 (Right) (Left) 70 80 - 70 80 - degree degree Vertical CR = 10 (Upper) (Lower) 60 70 - 60 70 - White x 0.263 0.313 0.363 White y 0.279 0.329 0.379 Red x 0.510 0.560 0.610 Red y 0.280 0.330 0.380 Green x 0.275 0.325 0.375 Green y 0.535 0.585 0.635 Blue x 0.100 0.150 0.200 Blue y 0.055 0.105 0.155 - 50 - Color / Chromaticity Coordinates (CIE 1931) Color Gamut Typ. 5 Points % Response Time Min. % Note 1, 2, 3 Note 4 Note 5 Note 6 Note 1: Measurement method Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent) Aperture 1 Test Point Center Environment < 1 lux ∘with 50cm viewing distance LCD Module SR_3 or equivalent measuring distance Module Driving Equipment G057QN01 V0 Ver. 1.0 6/22 G057QN01 V0 Note 2: Definition of 5 points position (Display active area: 115.2mm(W) x 86.4mm(H)) W W /4 W /4 W /4 W /4 H /4 1 2 H /4 3 H H /4 5 4 H /4 Note 3: The luminance uniformity of 5 points is defined by dividing the maximum luminance value by the minimum luminance value at full white condition. δ Maximum Brightness of five points W5 = Minimum Brightness of five points Note 4: Definition of contrast ratio (CR): Brightness @ “White” state Contrast ratio (CR) = Brightness @ “Black” state Note 5: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling time) and from “Black” to “White” (rising time), respectively. The response time interval definition is between 10% and 90% of amplitude. Please refer to the figure as below. % Tf Tr 100 90 Optical White Black White response 10 0 G057QN01 V0 Ver. 1.0 7/22 G057QN01 V0 Note 6: Definition of viewing angle Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over 180° horizontal and 180° vertical range. The 180° horizontal (θL, θR) and 180° vertical (ΦH, ΦL) range are illustrated as following figure. 3. Functional Block Diagram The following diagram shows the functional block of the G057QN01 V0 color TFT/LCD module. G057QN01 V0 Ver. 1.0 8/22 G057QN01 V0 4. Absolute Maximum Ratings 4.1 Absolute Ratings Item Symbol Min Max Unit Remark Logic/LCD Drive Voltage VDD -0.3 +3.6 Volt LED Forward Current IF 0 20 mA LED Reverse Voltage VR - 5 Volt LED Reverse Current IR - 100 μA For each channel LED Unit Remark 4.2 Absolute Ratings of Environment Item Symbol Min Max Operating Temperature TOP -30 +85 ℃ Note 1, 2 Operation Humidity HOP 5 95 %RH Storage Temperature TST -30 +85 ℃ Note 1, 2 Storage Humidity HST 5 95 %RH Note 1: Maximum Wet-Bulb should be 39 Note 1 Note 1 ℃ and no condensation. Note 2: Only operation is guaranteed. Optical performance should be evaluated at 25℃ only. G057QN01 V0 Ver. 1.0 9/22 G057QN01 V0 5. Electrical Characteristics 5.1 TFT-LCD Driving 5.1.1 Power Specification Symbol Parameter Min Typ Max Units 3.0 3.3 3.6 Volt VDD Logic/LCD Drive Voltage IDD VDD Current - 115 130 mA Irush LCD Inrush Current - - 1.5 A PDD VDD Power - 0.37 0.43 Watt Allowable Logic/LCD Drive Ripple Voltage - - 100 mVp-p Remark All Black Pattern (VDD=3.3V, at 60Hz) Note 1 All Black Pattern (VDD=3.3V, at 60Hz) All Black Pattern VDDrp (VDD=3.3V, at 60Hz) Note 1: Measurement condition: +3.3V Q3 AO6402 D6 D5 D2 D1 F1 S VDD VCC (LCD Module Input) G R1 47K (High to Low) Control Signal D1 D2 D5 D6 C1 1uF/16V Q3 AO6402 R2 S G 1K 2 C3 +12.0V SW1 1 SW MAG-SPST R2 VR1 0.01uF/25V 47K 1K C2 1uF/25V 3.3V 90% 10% 0V 0.5ms VDD rising time G057QN01 V0 Ver. 1.0 10/22 G057QN01 V0 5.1.2 Signal Electrical Characteristics Input signals shall be low or Hi-Z state when VDD is off. Parameter Symbol Min. Typ. Max. Unit Logic Input Voltage for High VIH 0.7VDD - VDD Volt Display Signals Low VIL 0 - 0.3VDD Volt High VIH 0.7VDD - VDD Volt Low VIL 0 - 0.3VDD Volt Remarks Input Voltage for RL/UD 5.2 Backlight Unit Driving 5.2.1 Parameter guideline for LED ℃ (Room Temperature). Following characteristics are measured under stable condition using a LED driving board at 25 Symbol IF VF PLED Parameter LED Forward Current LED Forward Voltage LED Power Operating Life Min Typ Max Unit - 15 20 mA Ta = 25 C - 28.0 - Volt IF = 15mA, Ta = -30 C - 26.8 32 Volt IF = 15mA, Ta = 25 C - 26.1 - Volt IF = 15mA, Ta = 85 C - 1.2 - Watt 25000 50000 Hrs Remark o o o o o IF = 15mA, Ta = 25 C Note 1: Ta means ambient temperature of TFT-LCD module. Note 2: IF, VF are defined for one channel LED. There are total three LED channels (AN1-CA1, AN2-CA2, AN3-CA3) in back light unit. See Section 6.6 for LED Backlight Unit Interface Signal Description. Note 3: If G057QN01 V0 module is driven by high current or at high ambient temperature & humidity condition. The operating life will be reduced. Note 4: Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated data. G057QN01 V0 Ver. 1.0 11/22 G057QN01 V0 6. Signal Characteristic 6.1 Pixel Format Image Following figure shows the relationship between input signal and LCD pixel format. 6.2 Scanning Direction The following figures show the image seen from the front view. The arrow indicates the direction of scan. Note 1: TFT-LCD interface signal description is shown in section 6.4. G057QN01 V0 Ver. 1.0 12/22 G057QN01 V0 6.3 The Input Data Format This product displays 262,144 colors in terms of the 64 grey levels on RGB respectively. The following table demonstrates the display of input data. G057QN01 V0 Ver. 1.0 13/22 G057QN01 V0 6.4 TFT- LCD Interface Signal Description Note 1: “Low” stands for 0V. “High” stands for 3.3V. “NC” stands for ”No Connection”. G057QN01 V0 Ver. 1.0 14/22 G057QN01 V0 6.5 TFT- LCD Interface Timing 6.5.1 Timing Characteristics DE mode only Signal Symbol Min. Typ. Max. Unit Remark Clock frequency (DOTCLK) 1/ TCLOCK 6.2 6.4 12.1 MHz Note1 Period TH 406 408 560 Active THD TCLOCK Note1 Blanking THB 86 88 240 Period TV 254 263 360 Active TVD TLINE Note1 Blanking TVB Horizontal Section Vertical Section 320 240 14 23 120 Note 1: Recommended frame rate is 60 Hz. 6.5.2 Input Timing Diagram Input Timing Definition ( DE Mode) TCLOCK DOTCLK Input Data Invaild Data Pixel 1 Pixel 2 Pixel 3 Pixel N-1 Pixel N Invaild Data Pixel 1 DE THB THD TH DE TVB TVD TV G057QN01 V0 Ver. 1.0 15/22 G057QN01 V0 6.6 LED Backlight Unit Interface Signal Description Pin # Symbol Pin Description 1 AN1 Channel 1 LED anode 2 AN2 Channel 2 LED anode 3 AN3 Channel 3 LED anode 4 CA1 Channel 1 LED cathode 5 CA2 Channel 2 LED cathode 6 CA3 Channel 3 LED cathode 6.7 Power ON/OFF Sequence VDD power, LCD interface signals and backlight on/off sequence are shown in the following chart. Signals from any system shall be Hi-Z state or low level when VDD is off. Power ON/OFF sequence timing Value Parameter Units Min. Typ. Max. T1 0.5 - 10 ms T2 0 - 50 ms T3 0 - 50 ms T4 0 - 10 ms T5 200 - - ms T6 200 - - ms T7 500 - - ms ON/OFF sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. G057QN01 V0 Ver. 1.0 16/22 G057QN01 V0 7. Connector & Pin Assignment 7.1 TFT- LCD Signal (CN1): LCD Connector Manufacturer Starconn or compatible Mating Connecter Model Number 089H33-000100-G2-R or compatible Pin# Symbol Pin# Symbol Pin# Symbol 1 GND 12 GND 23 B3 2 DOTCLK 13 G0 24 B4 3 NC 14 G1 25 B5 4 NC 15 G2 26 GND 5 GND 16 G3 27 DE 6 R0 17 G4 28 VDD 7 R1 18 G5 29 VDD 8 R2 19 GND 30 R/L 9 R3 20 B0 31 U/D 10 R4 21 B1 32 NC 11 R5 22 B2 33 GND 7.2 LED Backlight Unit (CN2): Backlight Connector Manufacturer STM or compatible Connector Model Number P24021P6 or compatible Mating Connecter Model Number SM06B-SHLS-TF or compatible Pin # Symbol Cable color Pin # Symbol Cable color 1 AN1 Red 4 CA1 White 2 AN2 Red 5 CA2 Blue 3 AN3 Red 6 CA3 Black G057QN01 V0 Ver. 1.0 17/22 G057QN01 V0 7.3 PIN 1 definition of CN1 and CN2 8. Reliability Test Criteria Items Temperature Humidity Bias High Temperature Operation Low Temperature Operation High Temperature Storage Low Temperature Storage Thermal Shock Test Hot Start Test Cold Start Test Required Condition ℃/90%,300Hr 85℃,300Hr -30℃,300Hr 85℃,300 hours -30℃,300 hours -20℃/30 min ,60℃/30 min ,100cycles 85℃/1 Hr (min.), power on/off per 5 minutes, repeat 5 times -30℃/1 Hr (min.), power on/off per 5 minutes, repeat 5 times 40 Remark Note 2 Note 2 Note 2 Note 2 Note 2 Note 2 Note 2 Note 2 Shock Test (Non-Operating) 50G,20ms,Half-sine wave, (±X, ±Y, ±Z) Note 2 Vibration Test (Non-Operating) 1.5G, 10~200~10Hz, Sine wave, 30mins/axis, 3 direction (X, Y, Z) Note 2 Contact Discharge: ±8KV, 150pF(330Ω) 1sec, 8 points, 25 times/point ESD Air Discharge: ±15KV, 150pF(330Ω) 1sec, 8 points, 25 times/point Attitude Test Operating: 14,000 ft, Ramp: 2000 ft/min, 8hrs Non-operating: 40,000 ft, Ramp: 2000 ft/min, 24hrs Note 1,2 Note 2 Note1: According to EN61000-4-2 ESD class B criteria, some performance degradation is allowed. TFT-LCD module is self-recoverable, no data lost and no hardware failures after test. G057QN01 V0 Ver. 1.0 18/22 G057QN01 V0 Note2: Water condensation is not allowed for each test items. Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test. The reliability test is performed only to examine the TFT-LCD module capability. To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance. G057QN01 V0 Ver. 1.0 19/22 G057QN01 V0 9. Mechanical Characteristics G057QN01 V0 Ver. 1.0 20/22 G057QN01 V0 10. Label and Packaging 10.1 Shipping Label (on the rear side of TFT-LCD display) 10.2 Carton Package Max. capacity: 60 pieces TFT-LCD module per carton Max. weight: 12.65 kg per carton Outside dimension of carton: 520(L)mm* 340(W)mm* 250(H)mm G057QN01 V0 Ver. 1.0 21/22 G057QN01 V0 11 Safety 11.1 Keen Edge Requirements There will be no keen edges or corners on the display assembly that could cause injury. 11.2 Materials 11.2.1 Toxicity There will be no carcinogenic materials used anywhere in the TFT-LCD module. If toxic materials are used, they will be reviewed and approved by the responsible AUO toxicologist. 11.2.2 Flammability All components including electrical components that do not meet the flammability grade UL94-V1 in the TFT-LCD Module will complete the flammability rating exception approval process. The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability rating will be printed on the printed circuit board. 11.3 Capacitors If any polarized capacitors are used in the TFT-LCD module, provisions will be made to keep them from being inserted backwards. 11.4 National Test Lab Requirement The TFT-LCD Module will satisfy all requirements for compliance to UL 60950 (U.S.A. Information Technology Equipment). G057QN01 V0 Ver. 1.0 22/22