AZ970E/AZ971E 40 AMP MINIATURE POWER RELAY FOR AUTOMOTIVE USE FEATURES • • • • • • • • Low cost Up to 40 Amp switching capability in a compact size Open, covered or sealed Coils to 24 VDC Small footprint (European style) 1 Form A, B and C contacts available Vibration and shock resistant Designed for high in-rush applications CONTACTS GENERAL DATA Arrangement SPST (1 Form A) SPST (1 Form B) SPDT (1 Form C) Life Expectancy Mechanical Electrical Minimum operations 5 x 106 operations 1 x 105 operations at 40 A 14 VDC Res. Ratings Resistive load: Operate Time (typical) 5 ms at nominal coil voltage Max. switched power: Form A: 560 W Form B: 420 W Form C: 420 W Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) Max. switched current: Form A: 40 A Form B: 30 A Form C: 30 A Dielectric Strength 500 VDC coil to contact (at sea level for 1 min.) 500 VDC between open contacts Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH * If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Dropout Greater than 6% of nominal coil voltage Silver tin oxide Ambient Temperature At nominal coil voltage Max. switched voltage: 150* VDC Material Resistance < 100 milliohms initially (24 V, 1 A voltage drop method) COIL Power AZ970E Operating AZ970E Storage -40°C (-40°F) to 105°C (221°F) -40°C (-40°F) to 105°C (221°F) AZ971E Operating AZ971E Storage -40°C (-40°F) to 105°C (221°F) -40°C (-40°F) to 105°C (221°F) Vibration 0.062" (1.5 mm) DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. At Pickup Voltage (typical) 514 mW (12 and 24 VDC Coil) 573 mW (6 VDC Coil) Max. Continuous Dissipation 5.3 W 20°C (68°F) ambient (AZ970E) 4.6 W 20°C (68°F) ambient (AZ971E) Max. Solder Temp. 270°C (518°F) Temperature Rise 56°C (101°F) nominal coil VDC (AZ970E) 59°C (106°F) nominal coil VDC (AZ971E) Max. Solder Time 5 seconds 155°C (311°F) Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 20 grams Max. Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-24 AZ970E/AZ971E RELAY ORDERING DATA — AZ970E — OPEN STYLE COIL SPECIFICATIONS Nominal Coil VDC 6 Must Operate VDC 3.3 Max. Continuous VDC 9.8 5.1 15.9 9 ORDER NUMBER Coil Resistance Ohm ±10% 19.0 50.0 Form A (SPST) AZ970E–1A–6D Form B (SPST) AZ970E–1B–6D Form C (SPDT) AZ970E–1C–6D AZ970E–1A–9D AZ970E–1B–9D AZ970E–1C–9D 12 6.8 21.3 90.0 AZ970E–1A–12D AZ970E–1B–12D AZ970E–1C–12D 24 13.9 42.7 362.0 AZ970E–1A–24D AZ970E–1B–24D AZ970E–1C–24D RELAY ORDERING DATA — AZ971E — With Dust Cover COIL SPECIFICATIONS Nominal Coil VDC 6 Must Operate VDC 3.3 Max. Continuous VDC 9.4 ORDER NUMBER* Coil Resistance Ohm ±10% 19.0 Form A (SPST) AZ971E–1A–6D Form B (SPST) AZ971E–1B–6D Form C (SPDT) AZ971E–1C–6D 9 5.1 15.2 50.0 AZ971E–1A–9D AZ971E–1B–9D AZ971E–1C–9D 12 6.8 20.4 90.0 AZ971E–1A–12D AZ971E–1B–12D AZ971E–1C–12D 24 13.9 41.0 362.0 AZ971E–1A–24D AZ971E–1B–24D AZ971E–1C–24D *Add suffix “E” for epoxy sealed version. MECHANICAL DATA Terminal Dimensions AZ970E Outline Dimensions and PCB Layout .740 [18.8 ± 0.4] .906 [23.0 ± 0.4] 3x ø.081 [ø2.1] .563 [14.3] Term. .106 [2.7] .165 [4.2] .232 [5.9] .134 [3.4] .709 [18.0 ± 0.4] .433 [11] .090 [2.3] .173 [4.4 ± 0.4] .130 [3.3] Dimensions 3,5 .041 [1.02] x .03 [0.76] 1,2 .041 [1.02] x .018 [0.46] 4 .041 [1.02] x .062 [1.57] Wiring Diagrams 4 .087 [2.2] .476 [12.1] 4x ø.055 [ø1.4] 4 FORM C 2 1 Viewed towards terminals 3 5 AZ971E Outline Dimensions and PCB Layout .831 [21.1 ± 0.3] 1.031 [26.2 ± 0.3] 4 3x ø.081 [ø2.1] 4 .563 [14.3] FORM B 1 .433 [11] 4 .130 [3.3] .138 [3.5 ± 0.5] 4 3 .232 [5.9] .170 [4.3] .134 [3.4] .020 [.5] 2 .106 [2.7] .165 [4.2] .831 [21.1 ± 0.3] 4 .087 [2.2] .476 [12.1] 4x ø.055 [ø1.4] Viewed towards terminals 4 FORM A 2 1 4 5 Viewed towards terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-24