AZSR216/316 - Zettler Electronics

Discontinuation Notice
FEATURES
•
•
•
•
•
•
•
ue
d
16 AMP 3-POLE SOLAR
POWER RELAY
31.12.2014
31.03.2015
RUC
!
AZSR216/316
Discontinuation date:
Date of last order:
Recommended replacement:
3 mm contact gap
PCB version
2-pole or 3-pole versions available
AZSR216: Clearance / creepage distance > 5 / 8 mm
AZSR316: Clearance / creepage distance > 5 / 5.5 mm
Holding Power < 100 mW
UL, CUR file E43203
Arrangement
DPST (2 Form A)
3PST (3 Form A)
Ratings
Resistive load:
tin
CONTACTS
Max. switched power: 280 W or 4000 VA
Max. switched current: 16 A
Max. switched voltage: 28 VDC* or 400 VAC
* Note: If switching voltage is greater than 28 VDC,
GENERAL DATA
Life Expectancy
Mechanical
special precautions must be taken.
Please contact the factory.
15 A at 250 VAC, resistive
Material
Silver cadmium oxide, silver nickel
Resistance
< 100 milliohms initially
(at 6 V, 1 A, voltage drop method)
sc
on
Rated Load
UL, CUR
COIL
Power
Electrical
Minimum operations
2 x 105
1 x 105 at 16 A, 250 VAC, res.
Operate Time (typical)
12 ms at nominal coil voltage
Release Time (typical)
7 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
2500 Vrms coil to contact
2500 Vrms between open contacts
2500 Vrms between contact sets
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Category of Protection
RT II
Holding Voltage
Greater than 20% of nominal coil voltage
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature
Operating
at nominal coil voltage
-40°C (-40°F) to 55°C (131°F)
at max. 50% of nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
Vibration
5 g at 10–150 Hz
At Pickup Voltage
(typical)
1.1 W
At Holding Voltage
(typical)
70 mW
Max. Continuous
Dissipation
2.05 W at 20°C (68°F) ambient
Temperature Rise
50 °C (90°F) at nominal coil voltage
Shock
10 g
Max. 130°C (266°F)
Enclosure
P.C.
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Weight
85 grams
Temperature
Di
NOTES
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.




   

 


2014-09-08
Discontinuation Notice
AZSR216/316
Discontinuation date:
Date of last order:
Recommended replacement:
31.12.2014
31.03.2015
RUC
COIL SPECIFICATIONS
Must Operate
VDC
12
9.6
24
19.2
Max. Continuous
VDC
2 Form A
13.2
85
AZSR216-2A-12D
AZSR316-3A-12D
26.4
345
AZSR216-2A-24D
AZSR316-3A-24D
* “2A” or “3A” denote silver cadmium oxide contacts.
Add suffix “B” at “2A” or “3A” for silver nickel contacts.









3 Form A
Max. DC breaking Capacity
tin


ORDER NUMBER*
Coil Resistance
Ohm ± 10%
ue
d
Nominal Coil
VDC
!
RELAY ORDERING DATA










A: resistive load DC1
B: inductive load L/R = 40 ms
 
sc
on
MECHANICAL DATA
38,6
36,1
*
1,2 x 0,5
8,3
11
11
11
11
8,3
4
5*
6
7
8*
9
22
6 x ø 1,5
8 x ø 1,5
Viewed toward terminals
WIRING DIAGRAMS
B
Di
A
8,85 7,6 8,3 11,25
PC BOARD LAYOUT
*not used on AZ SR216
Dimensions in mm.
Viewed toward terminals
Tolerance: ± 0.25 mm




   

 


2014-09-08