AZSR235/250

AZSR235/250
RoHS compliant !
50A (35A)
MINIATURE POWER RELAY
FEATURES
• 50 Amp switching (AZSR250)
• 35 Amp switching (AZSR235)
• Wide contact gap > 1.85mm (AZSR250)
• Wide contact gap > 2.05mm (AZSR235)
• Holding power <100mW
• Dielectric strength 5000Vrms
• Isolation spacing greater than 10mm
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1),
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E44211
• VDE certificate 40033251
GENERAL DATA
CONTACTS
Arrangement
SPST (1 Form A)
DPST (2 Form A)
Ratings
Resistive load:
AZSR235
Max. switched power: 1050W or 9695VA
Max. switched current: 35A
Max. switched voltage: 150 VDC* or 440 VAC
AZSR250
Max. switched power: 1500W or 13850VA
Max. switched current: 50A
Max. switched voltage: 150 VDC* or 440 VAC
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
5 x 104 at 35 A 250 VAC Res. (AZSR235)
5 x 104 at 50 A 250 VAC Res. (AZSR250)
Operate Time (typical)
40 ms at nominal coil voltage
Release Time (typical)
5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 2500 Vrms between contact sets
2500 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
AZSR235
35A at 277 VAC, resistive
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
C250
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Dropout
Greater than 5% of nominal coil voltage
AZSR250
50A at 277 VAC, resistive
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Weight
105 grams
Packing unit in pcs
10 per inner carton / 100 per carton box
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL
VDE
AZSR235
35A at 263 VAC, test refering to AC-7a, 85°C
AZSR250
50A at 263 VAC, test refering to AC-7a, 85°C
Material
Silver tin oxide
Resistance
< 50 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
270 mW (AZSR250)
NOTES
Max. Continuous
Dissipation
2.0 W at 20°C (68°F) ambient
Temperature Rise
15°C (27°F) at nominal coil voltage
2. Relay may pull in with less than “Must Operate” value.
Max. 155°C (311°F) Class F
3. Specifications subject to change without notice.
1. All values at 20°C (68°F).
Temperature
8/17/15
AZSR235/250
RELAY ORDERING DATA
ORDER NUMBER
COIL SPECIFICATIONS - SPST (1 FORM A)
Nominal Coil
VDC
Must Operate
VDC
Min. Holding
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
AZSR235-1A (35A)
AZSR250-1A (50A)
5
3.75
1.7
10.0
50
AZSR235-1AE-5D
AZSR250-1AE-5D
9
6.75
3.1
18.0
170
AZSR235-1AE-9D
AZSR250-1AE-9D
12
9.00
4.0
24.0
300
AZSR235-1AE-12D
AZSR250-1AE-12D
18
13.50
6.5
36.0
675
AZSR235-1AE-18D
AZSR250-1AE-18D
24
18.00
8.0
48.0
1200
AZSR235-1AE-24D
AZSR250-1AE-24D
COIL SPECIFICATIONS - DPST (2 FORM A)
ORDER NUMBER
Nominal Coil
VDC
Must Operate
VDC
Min. Holding
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
AZSR235-2A (35 A)
AZSR250-2A (50 A)
5
3.75
2.1
10.0
50
AZSR235-2AE-5D
AZSR250-2AE-5D
9
6.75
3.8
18.0
170
AZSR235-2AE-9D
AZSR250-2AE-9D
12
9.00
5.0
24.0
300
AZSR235-2AE-12D
AZSR250-2AE-12D
18
13.50
7.5
36.0
675
AZSR235-2AE-18D
AZSR250-2AE-18D
24
18.00
10.0
48.0
1200
AZSR235-2AE-24D
AZSR250-2AE-24D
MECHANICAL DATA
PC BOARD LAYOUT
40.0
25.0
7.0 x 2.5 (4x)
3.3 x 1.3 (2x)
14.7
49.2
*
*
22.8
10.0
3.5
*not used on 1 Form A version
2.0
Viewed toward terminals
4.5
*
WIRING DIAGRAM
2,8 x 0,8 (2x)
6,5 x 2 (4x)
*
6
4
2
*5
*3
1
*
8.2 14.7
3.5
22.8
10.0
*not used on 1 Form A version
Viewed toward terminals
*not used on 1 Form A version
Viewed toward terminals
Dimensions in mm. Tolerance: ± .25 mm
8/17/15