AZ881 8 A SPST / 5 A DPST POLARIZED SUBMINIATURE POWER RELAY MONOSTABLE OR LATCHING FEATURES • • • • • • Dielectric strength 4000 Vrms Single and dual coil latching versions available Epoxy sealed version available 8 Amp switching Class F (155°C) insulation available UL, CUR file E44211 CONTACTS GENERAL DATA Arrangement SPST (1 Form A), DPST (2 Form A) DPST (1 Form A and 1 Form B) Ratings Resistive load: Max. switched power: 150 W or 2000 VA (SPST) 150 W or 1250 VA (DPST) Max. switched current: 8 A (SPST) 5 A (DPST) Max. switched voltage: 150 VDC or 380 VAC* Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 8 A 250 VAC resistive (SPST) Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) Set Time (typical) 5 ms at nominal coil voltage Recommended coil pulse: 20 ms Reset Time (typical) 4 ms at nominal coil voltage Recommended coil pulse: 20 ms Dielectric Strength (at sea level) 4000 Vrms contact to coil 1000 Vrms between open contacts 2000 Vrms between contact sets Insulation Resistance 1000 megohms min. at 20°C 500 VDC 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 70°C (158°F) Vibration 0.078” (2.0 mm) DA at 10 to 55 Hz Shock 20 g functional 100 g destructive Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR SPST 8 A at 250 VAC resistive, 100k cycles 5 A at 30 VDC resistive, 100k cycles 1/6 HP at 250 VAC DPST 5 A at 250 VAC resistive, 100k cycles 5 A at 30 VDC resistive, 100k cycles 1/6 HP at 250 VAC Material Silver nickel, gold plating optional Resistance < 50 milliohms initially COIL Power At Pickup Voltage (typical) 192 mW (monostable, 2 coil latching) 96 mW (1 coil latching) Max. Continuous Dissipation 0.75 W at 20°C (68°F) ambient Max. Solder Temp. 270°C (518°F) Temperature Rise 30°C (54°F) at nominal coil voltage Max. Solder Time 5 seconds 130°C (266°F) Class B 155°C (311°F) Class F Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 5 grams Packing unit in pcs 50 per plastic tube / 2000 per carton box Max. Temperature NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Relay has fixed coil polarity. For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays. 5. Relay adjustment may be affected if undue pressure is exerted on relay case. 6. Specifications subject to change without notice. 7. DPST (1Form A and 1Form B): Both contacts may be closed simultaneously during transfer at set / reset process. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-06-17 AZ881 RELAY ORDERING DATA AZ881 COIL SPECIFICATIONS - MONOSTABLE Nominal Coil VDC 3 Must Operate VDC 2.4 ORDER NUMBER* Max. Continuous VDC Ohm ± 10% 4.7 Coil Resistance 1 Form A 2 Form A 1 Form A 1 Form B 30 AZ881-1A-3D AZ881-2A-3D 5 4.0 7.9 83 AZ881-1A-5D AZ881-2A-5D AZ881-1AB-3D AZ881-1AB-5D 6 4.8 9.6 120 AZ881-1A-6D AZ881-2A-6D AZ881-1AB-6D 9 7.2 14.4 270 AZ881-1A-9D AZ881-2A-9D AZ881-1AB-9D 12 9.6 19.2 480 AZ881-1A-12D AZ881-2A-12D AZ881-1AB-12D 24 19.2 37.9 1920 AZ881-1A-24D AZ881-2A-24D AZ881-1AB-24D *Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. Add suffix “F” for class F insulation. AZ881P1 COIL SPECIFICATIONS - SINGLE COIL LATCHING Nominal Coil VDC 3 Must Operate VDC 2.4 ORDER NUMBER* Max. Continuous VDC Ohm ± 10% 6.7 Coil Resistance 1 Form A 2 Form A 1 Form A 1 Form B 60 AZ881P1-1A-3D AZ881P1-2A-3D AZ881P1-1AB-3D 5 4.0 11.2 167 AZ881P1-1A-5D AZ881P1-2A-5D AZ881P1-1AB-5D 6 4.8 13.4 240 AZ881P1-1A-6D AZ881P1-2A-6D AZ881P1-1AB-6D 9 7.2 20.1 540 AZ881P1-1A-9D AZ881P1-2A-9D AZ881P1-1AB-9D 12 9.6 26.8 960 AZ881P1-1A-12D AZ881P1-2A-12D AZ881P1-1AB-12D *Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. Add suffix “F” for class F insulation. AZ881P2 COIL SPECIFICATIONS - DUAL COIL LATCHING Nominal Coil VDC 3 Must Operate VDC 2.4 ORDER NUMBER* Max. Continuous VDC Ohm ± 10% 4.7 Coil Resistance 1 Form A 2 Form A 1 Form A 1 Form B 30 AZ881P2-1A-3D AZ881P2-2A-3D 5 4.0 7.9 83 AZ881P2-1A-5D AZ881P2-2A-5D AZ881P2-1AB-3D AZ881P2-1AB-5D 6 4.8 9.6 120 AZ881P2-1A-6D AZ881P2-2A-6D AZ881P2-1AB-6D 9 7.2 14.4 270 AZ881P2-1A-9D AZ881P2-2A-9D AZ881P2-1AB-9D 12 9.6 19.2 480 AZ881P2-1A-12D AZ881P2-2A-12D AZ881P2-1AB-12D 24 19.2 37.9 1920 AZ881P2-1A-24D AZ881P2-2A-24D AZ881P2-1AB-24D *Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. Add suffix “F” for class F insulation. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-06-17 AZ881 MECHANICAL DATA Outline Dimensions -1A Monostable and 1 coil latching -2A, -1AB .433MAX [11.0] 0.795MAX [20.2] .433MAX [11.0] .795MAX [20.2] .409MAX [10.40] .134 [3.40] .048 [1.22] .409MAX [10.40] .134 [3.40] .300 [7.62] .400 [10.16] .048 [1.22] .300 [7.62] 4 x .016 x .031 4 x [.40 x .80] .400 [10.16] .300 [7.62] .300 [7.62] 6 x .016 x .031 6 x [.40 x .80] -1A 2 coil latching -2A, -1AB .433MAX [11.0] .795MAX [20.2] .433MAX [11.0] .795MAX [20.2] .409MAX [10.40] .134 [3.40] .134 [3.40] .100 [2.54] .400 [10.16] .300 [7.62] .300 [7.62] 6 x .016 x .031 6 x [.40 x .80] Wiring Diagrams Monostable and 1 coil latching .300 [7.62] .400 [10.16] - + + + -2A, -1AB 1 coil latching (Reset condition) 6-Ø.047 [Ø1.20] -1A .300 [7.62] .100 [2.54] .300 [7.62] + - set 2 coil latching .300 [7.62] -1AB -2A + - set - .100 [2.54] -1AB - reset 4-Ø.047 [Ø1.20] -2A -1A - set .300 [7.62] -1A Monostable (Denergized condition) .300 [7.62] reset .300 [7.62] .300 [7.62] .300 [7.62] 8 x .016 x .031 8 x [.40 x .80] PC Board Layout .400 [10.16] .100 [2.54] .400 [10.16] .048 [1.22] reset .048 [1.22] .409MAX [10.40] + - + - + - + .300 [7.62] 2 coil latching (Reset condition) -2A - + + Viewed toward terminals - reset 8-[Ø.047] [Ø1.20] - -1AB - set - reset -1A -2A, -1AB set .300 [7.62] reset 6-[Ø.047] [Ø1.20] -1A set .300 [7.62] - + + + + Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-06-17