RENESAS 3850A_08

3850A Group (QzROM version) Standard Characteristics
M38503G4A-XXXSP/FP
M38503G4ASP/FP
Standard Characteristics Example
Standard characteristics described below are just examples of the 3850A Group(QzROM version)'s characteristics and are not guaranteed.
For rated values, refer to "3850 Group (Spec.A QzROM version) Datasheet".
(1) Power Supply Current Standard Characteristics Example (Vcc-Icc)
When system is operating in high-speed mode (ceramic oscillation, Ta =
25 °C, output transistor is in the cut-off state)
QzROM version (A/D conversion not executed)
When system is operating in middle-speed mode (ceramic oscillation,
Ta = 25 °C, output transistor is in the cut-off state)
QzROM version (A/D conversion not executed)
7.0
3.0
f(XIN)=12MHz
f(XIN)=8MHz
f(XIN)=4MHz
f(XIN)=2MHz
2.5
Power Supply Current Icc [mA]
Power Supply Current Icc [mA]
6.0
5.0
4.0
3.0
2.0
1.0
0.0
2.0
1.5
1.0
0.5
0.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig.1. Vcc-Icc (QzROM version, high-speed mode)
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig.2. Vcc-Icc (QzROM version, middle-speed mode)
When system is operating in low-speed mode (crystal oscillation,
output transistor is in the cut-off state)
QzROM version (A/D conversion not executed)
At STP instruction executed (Ta = 25 °C, output transistor is in the cut-off
state)
QzROM version
90.0
2.0
1.8
80.0
STP
-20℃
25℃
70.0
Power Supply Current Icc [nA]
Power Supply Current Icc [uA]
f(XIN)=12MHz
f(XIN)=8MHz
f(XIN)=4MHz
f(XIN)=2MHz
85℃
60.0
50.0
40.0
30.0
20.0
10.0
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
1.5
5.5
Power Source Voltage Vcc [V]
Fig3. Vcc-Icc (QzROM version, low-speed mode)
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 4. Vcc-Icc (QzROM version, at STP instruction executed)
At 12 MHz high-speed mode, increment at A/D conversion executed
(ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state)
QzROM version
At WIT instruction executed (ceramic oscillation, Ta = 25 °
C,f(XIN)=12MHz, output transistor is in the cut-off state)
QzROM version
2.0
6.0
high-speed mode
Power Supply Current Icc [mA]
Power Supply Current Icc [mA]
A/D conversion executed
5.0
A/D conversion not executed
4.0
3.0
2.0
1.0
0.0
middle-speed mode
1.5
1.0
0.5
0.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig.5. Vcc-Icc (QzROM version, increment at A/D conversion executed)
REJ99B1151-0100
©2008. Renesas Technology Corp., All rights reserved.
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig.6. Vcc-Icc (QzROM version, at WIT instruction executed )
Page 1 of 7
May 2008
3850A Group (QzROM version) Standard Characteristics
M38503G4A-XXXSP/FP
M38503G4ASP/FP
At WIT instruction executed in low-speed WIT mode (crystal oscillation,
Ta = 25 °C, f(XCIN)=32.768KHz, output transistor is in the cut-off state)
QzROM version
70.0
Power Supply Current Icc [uA]
60.0
low-speed mode WIT
50.0
40.0
30.0
20.0
10.0
0.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig.7. Vcc-Icc (QzROM version, at WIT instruction executed in low-speed WIT mode )
(2) Power Supply Current Standard Characteristics Example (f(XIN) -Icc)
When system is operating in high-speed mode (ceramic oscillation, Ta =
25 °C, output transistor is in the cut-off state)
QzROM version (A/D conversion not executed)
When system is operating in middle-speed mode (ceramic oscillation, Ta
= 25 °C, output transistor is in the cut-off state)
QzROM version (A/D conversion not executed)
7.0
3.0
Vcc = 5.0 V
Vcc = 5.0 V
2.5
Vcc = 3.0 V
Power Supply Current Icc [mA]
Power Supply Current Icc [mA]
6.0
5.0
4.0
3.0
2.0
1.0
Vcc = 3.0 V
2.0
1.5
1.0
0.5
0.0
0.0
2
4
6
8
10
2
12
Oscillation Frequency f(XIN) [ MHz]
Fig.8. f(XIN) -Icc (QzROM version, high-speed mode)
4
6
8
10
12
Oscillation Frequency f(XIN) [ MHz]
Fig. 9. f(XIN) -Icc (QzROM version, middle-speed mode)
At WIT instruction executed in middle-speed mode (ceramic oscillation,
Ta = 90 °C, output transistor is in the cut-off state)
QzROM version
2.0
Power Supply Current Icc [mA]
Vcc = 5.0 V
1.5
Vcc = 3.0 V
1.0
0.5
0.0
2
4
6
8
10
12
Oscillation Frequency f(XIN) [ MHz]
Fig. 10. f(XIN) -Icc (QzROM version at WIT instruction executed in middle-speed mode)
REJ99B1151-0100
©2008. Renesas Technology Corp., All rights reserved.
Page 2 of 7
May 2008
3850A Group (QzROM version) Standard Characteristics
M38503G4A-XXXSP/FP
M38503G4ASP/FP
(3) Port Standard characteristics Example (VOH-IOH)
VOH-IOH (Vcc = 5.0 V, Ports P0, P1, P20,P21,P24-P27, P3, P4)
QzROM version
VOH-IOH (Vcc = 3.0 V, Ports P0, P1, P20,P21,P24-P27, P3, P4)
QzROM version
-50
-20
Ta=-20℃
"H" Output Current IOH [mA]
"H" Output Current IOH [mA]
Ta = -20 °C
Ta=25℃
-40
Ta=85℃
-30
-20
-10
0
0
1
2
3
4
-15
Ta = 25 °C
Ta = 85 °C
-10
-5
0
5
0
1
2
3
4
5
"H" Output Voltage VOH [V]
Fig. 12. QzROM version, VOH-IOH
(Vcc = 3.0 V,Ports P0, P1, P20,P21,P24-P27, P3, P4)
"H" Output Voltage VOH [V]
Fig.11 QzROM version, VOH-IOH
(Vcc = 5.0 V, Ports P0, P1, P20,P21,P24-P27,P3, P4)
(4) Port Standard Characteristics Example (VOL-IOL)
VOL-IOL (Vcc = 5.0 V, Ports P0, P20,P21,P24-P27, P3, P4)
QzROM version
VOL-IOL (Vcc = 3.0 V, Ports P0, P20,P21,P24-P27, P3, P4)
QzROM version
30
50
Ta = -20°C
Ta =85 °C
30
20
"L" Output Current IOL [mA]
Ta = 25 °C
40
"L" Output Current IOL [mA]
Ta = -20 °C
Ta = 25 °C
20
Ta = 85 °C
10
10
0
0
0
1
2
3
4
0
5
1
2
3
4
"L" Output Voltage VOL [V]
Fig. 13.QzROM version, VOL-IOL
(Vcc = 5.0 V, Ports P0, P20,P21,P24-P27, P3, P4)
"L" Output Voltage VOL [V]
Fig. 14. QzROM version, VOL-IOL
(Vcc = 3.0 V, Ports P0, P20,P21,P24-P27, P3, P4)
VOL-IOL (Vcc = 5.0 V, Ports P1)
QzROM version
VOL-IOL (Vcc = 3.0 V, Ports P1)
QzROM version
80
50
70
Ta=-20℃
40
50
"L" Output Current IOL [mA]
Ta=25℃
60
"L" Output Current IOL [mA]
5
Ta=85℃
40
30
20
Ta = -20 °C
30
Ta = 25 °C
Ta = 85 °C
20
10
10
0
0
0
1
2
3
4
5
0
Fig. 15.QzROM version, VOL-IOL
(Vcc = 5.0 V, Port P1)
REJ99B1151-0100
©2008. Renesas Technology Corp., All rights reserved.
1
2
3
4
5
L Output Voltage VOL [V]
"L" Output Voltage VOL [V]
Fig. 16. QzROM version, VOL-IOL (Vcc = 3.0 V, Ports P1)
Page 3 of 7
September 2008
3850A Group (QzROM version) Standard Characteristics
M38503G4A-XXXSP/FP
M38503G4ASP/FP
VOL-IOL (Vcc = 5.0 V, Ports P22,P23)
QzROM version
VOL-IOL (Vcc = 3.0 V, Ports P22,P23)
QzROM version
110
50
30
Ta=-20℃
100
Ta=-20℃
Ta=-25℃
25
Ta=25℃
Ta=-85℃
70
"L" Output Current IOL [mA]
"L" Output Current IOL [mA]
90
40
80
Ta=85℃
30
60
50
40
20
30
20
10
10
20
Ta=-20℃
Ta=25℃
15
Ta=85℃
10
5
0
0
1
2
1
2
3
4
5
0
0
0
3
4
0
5
1
2
3
4
5
"L" Output Voltage VOL [V]
Fig. 18.QzROM version, VOL-IOL
(Vcc = 3.0 V, Ports P22,P23)
"L" Output Voltage VOL [V]
Fig. 17.QzROM version, VOL-IOL
(Vcc = 5.0 V, Ports P22,P23)
(5) Port Standard Characteristics Example (Vcc-IIL)
Vcc-IIL (When connecting pull-up transistor, Ports P0, P1, P20, P21, P24-P27, P3, P4)
QzROM version
-80
-70
"L" Input Current IIL [uA]
-60
Ta=-20℃
-50
Ta=-20℃
Ta=25
℃
Ta=25℃
-40
Ta=85℃
Ta=85℃
-30
-20
-10
0
0
1
2
3
4
5
Power Source Voltage Vcc [V]
Fig. 19. QZROM version, Vcc-IIL (when connecting pull-up transistor,
Ports P0, P1, P20, P21, P24-P27, P3, P4)
(6) Port Standard Characteristics Example (Vcc-VIHL)
Vcc-VIHL (I/O Ports (CMOS) , Ta = 25 °C, Ports P0)
QzROM version
4
VIH
VIL
Input Voltage VIHL [V]
3
2
1
0
1
2
3
4
5
6
Power Source Voltage Vcc [V]
Fig. 20.QzROM version , Vcc-VIHL (I/O Ports (CMOS) , Ta = 25 °C, Ports P0)
REJ99B1151-0100
©2008. Renesas Technology Corp., All rights reserved.
Page 4 of 7
September 2008
3850A Group (QzROM version) Standard Characteristics
M38503G4A-XXXSP/FP
M38503G4ASP/FP
Vcc-VIHL (RESET pin, Ta = 25 °C)
QZROM version
Vcc-VIHL (XIN pin, Ta = 25 °C)
QZROM version
4
3.0
VIH
VIH
VIL
VIL
2.5
Input Voltage VIHL [V]
Input Voltage VIHL [V]
3
2
1
2.0
1.5
1.0
0.5
0
0.0
1
2
3
4
5
6
0
1
2
3
4
Power Source Voltage Vcc [V]
Fig. 21. QZROM version, Vcc-VIHL (RESET pin)
Power Source Voltage Vcc [V]
Fig.22. QZROM version, Vcc-VIHL (XIN pin)
Vcc-VIHL (INT0~INT2 pin, Ta = 25 °C)
QzROM version
Vcc-HYS (INT0~INT2 pin , Ta = 25 °C)
QzROM version
4
6
0.8
VIH
VIL
0.6
Hysteresis HYS [V]
3
Input Voltage VIHL [V]
5
2
1
0.4
0.2
0
0.0
1
2
3
4
5
6
Power Source Voltage Vcc [V]
Fig. 23. QzROM version, Vcc-VIHL (INT0~INT2 pin)
1
2
3
4
5
6
Power Source Voltage Vcc [V]
Fig.24. QzROM version, Vcc-HYS (INT0~INT2 pin)
Vcc-HYS (RESET pin, Ta = 25 °C)
QzROM version
1.0
Hysteresis HYS [V]
0.8
0.6
0.4
0.2
0.0
1
2
3
4
5
6
Power Source Voltage Vcc [V]
Fig. 25. QzROM version, Vcc-HYS (RESET pin)
REJ99B1151-0100
©2008. Renesas Technology Corp., All rights reserved.
Page 5 of 7
September 2008
3850A Group (QzROM version) Standard Characteristics
M38503G4A-XXXSP/FP
M38503G4ASP/FP
(7) Port Standard Characteristics Example (VIN-II (AD) )
VIN-II (AD) (A/D converter operationg, f(Xin) =8 MHz, high-speed mode
Vcc = 5.0 V, Ta = 25 °C)
QzROM version
500
500
400
400
300
300
Input Current II (AD) [nA]
Input Current II (AD) [nA]
VIN-II (AD) (A/D converter operation, f(Xin) = 12 MHz,high-speed mode
Vcc = 5.0 V, Ta = 25 °C)
QzROM version
200
100
0
-100
-200
200
100
0
-100
-200
-300
-300
-400
-400
-500
-500
0
1
2
3
4
5
Input Voltage VIN [V]
Fig. 26.QzROM version, VIN-II (AD) (f(Xin) =12 MHz high-speed mode )
0
1
2
3
4
5
Input Voltage VIN [V]
Fig. 27.QzROM version, VIN-II (AD) (f(Xin) =8 MHz high-speed mode )
VIN-II (AD) (A/D converter operation, f(Xin) = 4 MHz, high-speed mode, Vcc
= 5.0 V, Ta = 25 °C)
QzROM version
500
400
Input Current II (AD) [nA]
300
200
100
0
-100
-200
-300
-400
-500
0
1
2
3
4
5
Input Voltage VIN [V]
Fig.28. QzROM version, VIN-II (AD) (f(Xin) = 4 MHz high-speed mode )
REJ99B1151-0100
©2008. Renesas Technology Corp., All rights reserved.
Page 6 of 7
September 2008
3850A Group (QzROM version) Standard Characteristics
M38503G4A-XXXSP/FP
M38503G4ASP/FP
(8) A/D Conversion Accuracy Characteristics
A/D conversion accuracy standard characteristics example
M3850 A/D CONVERTER STEP WIDTH MEASUREMENT
Error
1LSB Width
• Temp. = 25[°C]
• CPU mode = high-speed mode
• A/D conversion clock = f(XIN)/2
• Vcc = 5.12[V]
• VREF = 5.12[V]
• f(XIN) = 8[MHz]
15
ERROR/1LSB WIDTH(mV)
10
5
0
-5
-10
-15
0
16
32
48
64
80
96
112
128
STEP No.
144
160
176
192
208
224
240
256
256
272
288
304
320
336
352
368
384
STEP No.
400
416
432
448
464
480
496
512
512
528
544
560
576
592
608
624
640
STEP No.
656
672
688
704
720
736
752
768
784
800
816
832
848
864
880
896
STEP No.
912
928
944
960
976
992
1008
1024
15
ERROR/1LSB WIDTH(mV)
10
5
0
-5
-10
-15
15
ERROR/1LSB WIDTH(mV)
10
5
0
-5
-10
-15
15
ERROR/1LSB WIDTH(mV)
10
5
0
-5
-10
-15
768
Fig. 29. A/D conversion accuracy standard characteristics
REJ99B1151-0100
©2008. Renesas Technology Corp., All rights reserved.
Page 7 of 7
September 2008
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.