FRD30000 fully screened 6.5kV, 20A cynergycomponents The very high carry current capacity and high voltage isolation of this series is achieved through the use of multiple high vacuum reed switch contacts, ensuring a high level of performance and reliability. The two standard models will carry currents of 12 and 20Amps respectively at 30MHz and feature silver plated, fully screened coil assemblies for ultra-low RF losses. Typical applications include over the horizon (OTH) HF radar systems and 1kW base station transmitters. Up to 20A Carry Current at 30MHz 6.5kV DC isolation across contacts Fully Screened Coil for Low RF Loss Cost Effective alternative to Vacuum Ceramic Devices Unique Design Suitable for 1 kW HF Transmitters Available as Form A (SPNO) only. CONTACT Action (form A, B or Latching) Switching Voltage Switching Current Carry Current Isolation Capacitance (max.) Lifetime Contact Resistance Insulation Resistance UNITS CONDITIONS V A A kV pF operations mOhms Ohms DC max DC max RMS at 30MHz max DC max coil/screen gnd dry switching 24V, 1A maximum (typical) minimum (typical) VDC VDC VDC Ohms max min +/10% FRD32061 A 20 1 12 6 2 109 107-108 50 (10) 1010 (1013) FRD32062 A 20 1 20 6.5 2 109 107-108 50 (10) 1010 (1013) 24 16 4 430 Full Via Mtg Screws 24 16 4 270 Full Via Mtg Screws 5 3 5 3 COIL at 20’C Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Nominal Working Voltage Must Operate Must Release Nominal Resistance RF Screening RF Screening Connection RELAY Operate time (incl. bounce) Release time Isolation contact to all other terminals Isolation coil to screen Capacitance contact to all other terms ENVIRONMENTAL Storage temperature range Operating temperature range Weight ms ms kV kV DC max DC max 10 0.5 10 0.5 pF contacts open 6.0 6.0 typical -55°C to +125°C -40°C to +85°C 76 108 °C °C gm Email:[email protected] ISO 9001 C E R T I F I E D www.cynergy3.com © 2011 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. FRD30000-2011 FRD30000 fully screened 6.5kV, 20A Mechanical Dimensions All dimensions are in millimeters (inches) FRD32061 35.00 max (1.38") 19.00 max (0.74") 70.00 max (2.75") 25.00 max (0.98") 2 holes 3.60 dia. (0.14") 5.0 8.60 dia. (0.35") 42.00 max 34.5 15.24 (1.65") (1.36") (0.60") 6.00 (0.23") 1.0 dia. (0.039") 57.0 max (2.24") 6.0 max (0.23") 12.00 (0.47") FRD32062 68.00 max. (2.67") 51.00 max. (2.00") 7.0 (0.27") 2 holes 3.60 dia. (0.14") 51.00 max. 42.00 15.24 (2.00") (1.65") (0.60") 25.00 max (0.98") 2 holes 4.80 dia. (0.188") 1.0 dia. (0.039") 25.00 max (0.98") 7.50 max. (0.29") 25.00 max (0.98") ISO9001 Certifed 4.50 (0.18") USA Sales & Tech Support(866) 258-5057 Email: [email protected] Cynergy3 Components 2320 Paseo de las Americas, Suite 104 San Diego, CA 92154 12.00 (0.47") EUROPE - UK Telephone +44 (0) 1202 897969 Fax +44 (0) 1202 891918 Email:[email protected] Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE ASIA - Thailand Telephone +66 (0)2 665 2517 Fax +66 (0)2 665 2588 Cynergy 3 Components, Asia 18/8 Fico Place 12th Floor Soi Sukhumvit 21 (Asoke) Klongtoey Nua, Wattana Bangkok, Thailand 10110 © 2007 Cynergy3 Components, All Rights Reserved. Specifcations ar subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Corp. *Other names and brands may be claimed as the property of others.