product details QTP5 1X49/220-240 UNV1 Product description: EAN/ Product: Quantity: QTP5 1X49/220-240 UNV1 4008321061614 Unpacked (UNV) contains 1 Piece (PCE) You can find this product in the eCatalog: http://catalog.myosram.com?~language=EN&~country=COM&it_p=4008321061614 Applications Dimmable No Type of protection IP20 Lamp start preheat start within 1 s General Description Design / version ECG standard Standards acc. to EN 55015, CISPR 15 | acc. to EN 61547 / IEC 61547 | acc. to EN 61000-32 / IEC 61000-3-2 | acc. to EN 61347-2-3 / IEC 61347-2-3 Energy Label - EEI A2 Sstl-Number 4030209 Technical - Electrical Data Operating frequency 40 ... 50 kHz Mains frequency 50-60 Hz TH full width at half maximum 180 µs Power factor c 0.98 Nominal voltage 220-240 V DC voltage 154...276 V 1) IP inrush current 33 A Max. no. of ECGs on circuit breaker 10A 17 Max. no. of ECGs on circuit breaker 16A 28 Dielectric strength 300 V - permanent / 320 V - 48 h / 350 V - 2h Technical - Geometries Mounting hole spacing, length 350 mm Width 30 mm Height 21 mm Length 360 mm Technical - Temperatures Max. casing temp. in case of fault 110 °C Max. operating temp. at the Tc point 75 °C Ambient temperature range -20 ... +50 °C Storage temperature -40 ... 85 °C Relative humidity 5 ... 85 % 2) Packaging units EAN Packaging type and content Dimensions in h x w x l Gross weight Volume 4008321061614 Unpacked contains 1 Piece 33,000 mm x 22,000 mm x 361,000 mm 330,000 g (0,000 g) 0,262 Cubic dec. 4008321061621 Shipping carton box contains 20 Piece 170,000 mm x 96,000 mm x 370,000 mm 4.969,000 g (0,000 g) 6,038 Cubic dec. 1) lamp start only with more than 198 V (DC) 2) max. 56 d/y at 85% QTP5 1X49/220-240 UNV1 product details Lamp wiring: QTP 5 1x49 UN 1 21 2 22 3 4 23 QTP5 1x... 24 5 25 6 26 7 27 L Max. permitted cable length in between ECG and lamp: 2.0 m (PIN 21; 22); 1.0 m (PIN 26, 27)