www.osram.com Product Information PARATHOM® CLASSIC B25/P25 frosted Product Overview Product Wattage CCT lm Base PARATHOM® CLASSIC B25 frosted 3,6 2700 250 E14 PARATHOM® CLASSIC P25 frosted 3,6 2700 250 E14 PARATHOM® CLASSIC P25 frosted 3,6 2700 250 E27 Benefits Key Features • • • • • 3,6W LED lamp as high-quality replacement for a 25W incandescent candle lamp • E14 base and E27 base • Available in 2700K warm white color temperature • Energy efficiency class A+ • 15,000 hours lifetime³ • Similar dimensions as incandescent candle lamp • UV and NIR radiation free • Mercury free • 4 years Osram Guarantee (www.osram.com/guarantee) For all household luminaires Low energy consumption and maintenance costs Longer lifetime² GLS-like Design Product Wattage CCT lm Base Diameter Lenght Weight Viewing Angle EAN10 EAN40 (ship.unit) Ship . unit PARATHOM® CLASSIC B25 frosted 3,6 2700 250 E14 35 mm 100 mm 33 g 4052899031920 4052899031937 10 PARATHOM® CLASSIC P25 frosted 3,6 2700 250 E14 45 mm 78 mm 31 g 4052899031982 4052899031999 10 PARATHOM® CLASSIC P25 frosted 3,6 2700 250 E27 45 mm 78 mm 31 g 4052899032040 4052899032057 10 2 Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. 3 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), C), free air burning, base up burning position and at rated voltage. PARATHOM® CLASSIC B25/P25 frosted 1 www.osram.com Product Information PARATHOM® CLASSIC B25/P25 frosted Common Characteristics3 Average lifetime4 Switching cycles Casing material Starting time Warm up time for 60% light Power factor 15,000 hrs 100,000 Plastic <1s 0.0 s 0.44 Nominal current Tc temperature max.5 CRI Mercury max. 36 mA 77°C 80 0.0 mg (30s on, 30s off) TC TC Good heat exchange supports ideal performance Disposal information • Lamps with WEEE sign can be returned at specific collection points. • LED lamps have to be disposed as special waste. 3 Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. 4 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical identica lamps goes below 70% of its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), C), free air burning, base up burning position and at rated voltage. 5 The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated indicat position) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 62031: 2009-01) 2009 PARATHOM® CLASSIC B25/P25 frosted 2 www.osram.com Product Information PARATHOM® CLASSIC B25/P25 frosted Application information • • • • • Suitable for indoor application. For outdoor applications and operation in damp locations special approved fixture are required. Input voltage: 220-240V Storage temperature & humidity conditions (-20°C up to +40°C, C, at max. 95% relative humidity) Operating temperature & humidity conditions (-20°C C up to +40°C, +40 at max. 95% relative humidity) Lamp conformity • • • • • • • • • • • 2004/108/EC Electromagnetic compatibility (EMC) 244/2009 Ecodesign requirements for non-directional directional household lamps IEC/ PAS 62612 Self ballasted LED-lamps lamps for general lighting services – Performance requirements 2009/125/EC Ecodesign requirements for energy related products 2011/65/EC Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) ( 1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH Regulation) 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) EN 62471 Photobiological safety of lamps and lamp systems EN 55015 Limits and methods of measurement of radio disturance EN 61000-3-2 Electromagnetic compatibility – Limits for harmonic current emission EN 61000-3-3 Electromagnetic compatibility – Limitation of voltage changes, voltage fluactuations, flicker in public low voltage supply systems • EN61547 Electromagnetic compatibility immunity requirements • 1194/2012 Eco design requirement for directional lamps, light emitting diode lamps and related equipment (DIM II) • IEC 62560 self-ballasted LED-lamps lamps for general lighting services by voltage >50V – Safety specifications • 874/2012/EU Energy labeling of electrical lamps and luminaires PARATHOM® CLASSIC B25/P25 frosted 3