www.osram.com LED SUPERSTAR Classic A50 Product description LED-lamps for mains voltage True 50W Classic GLS replacement Dimmable Low energy consumption Product Offering Type reference Wattage CCT CLASSIC A 50 ADV 827 12 W 2700K 1. Key Features and Benefits • 12W LED lamp as high-quality 50W GLS replacement • E27 base • 220-240 input voltage • Dimmable1 • Available in 2700K – warm white colour temperature • Reduces energy consumption up to 80% • 25.000 hours lifetime • UV and NIR radiation free • Mercury free 1• Operates with conventional and electronic control gear See www.osram.com/dim 2• Switching cycles: up to 100.000 times See www.osram.com/guarantee • 4 years OSRAM Guarantee2 1 2 See www.osram.com/dim See www.osram.com/guarantee GL MK, Edition October 2011 subject to alteration 1 Beam Angle 150° CRI 82 2. Common Characteristics3 Average lifetime4 Switching cycles Casing material (30s on, 30s off) 25,000h Starting time max. 100,000 Metal/plastic Mercury max. Base Type Length Diameter 0.0mg E27 126mm 62mm Weight 170g 0.9s Tc temperature max.5 90°C Warm up time for 60% light Power factor none >0.9 Nominal current (230V) Lm / W 55mA 54 3. Characteristic Range3 Type reference Wattage Correlated colour temperature Luminous flux CL A 50 ADV 827 12W 650lm 2700K±200K CRI Beam angle 82 150° 4. Mounting information Good heat exchange supports ideal performance Tc 5. Disposal information WEEE-lamps can be returned at specific collection points. LED lamps have to be disposed as special waste. 6. Application Information Applications All current household luminaires Hotels Hospitals Facilities Office space Application Notes 1. Suitable for indoor application 2. For outdoor applications and operation in damp locations special approved fixture are required 3. Input voltage: 230V (40mA) 4. Operating temperature range between -20°C and 40°C 3 Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. 4 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its MK, initial luminous (L70B50,2011 IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning position and at rated GL Editionflux October voltage. To achieve a full lifetime a good heat exchange for the electronic components is required. subject to alteration 5 The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated position) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 62031: 2009-01) 2 7. Ordering Guide Type reference CL A 50 ADV 827 Product Number – 1pcs Product Number – 1 shipping unit Number of pcs / ship. unit 4008321645944 4008321645951 4 8. Lamp conformity 2006/95/EC EN62560 IEC 62612 2004/108/EC 2009/125/EC 2011/65/EC 1907/2006 2002/96/EC EN 62471 EN 55015 EN 61000-3-2 EN 61000-3-3 systems 244/2009 EN61547 Electrical equipment designed for use within certain voltage limits Self ballasted LED-lamps for general lighting services by voltage >50V - Safety Self ballasted LED-lamps for general lighting services – Performance requirements Electromagnetic compatibility (EMC) Ecodesign requirements for energy related products Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH Regulation) Waste Electrical and Electronic Equipment Directive (WEEE) Photobiological safety of lamps and lamp systems Limits and methods of measurement of radio disturbance Electromagnetic compatibility – Limits for harmonic current emission Electromagnetic compatibility – Limitation of voltage changes, voltage fluctuations, flicker in public low voltage supp Ecodesign requirements for non-directional household lamps Electromagnetic compatibility immunity requirements GL MK, Edition October 2011 subject to alteration 3