powerstar® hqi®-t

www.osram.com
POWERSTAR® HQI®
Technical Information
Contents.
POWERSTAR® HQI®-T
3, 5 – 7
POWERSTAR HQI -T, BT
4
POWERSTAR® HQI®-TS Excellence
8
POWERSTAR® HQI®-TS
9 – 11
®
®
POWERSTAR HQI -E for open luminaires
12 – 14
POWERSTAR® HQI®-E/P for open luminaires
15
POWERSTAR® HQI®-E
16 – 17
Operating instructions
18 – 19
Lamp life/Operating characteristics in relation to the supply voltage
20
Start-up behaviour
21
®
®
Circuit diagrams/Burning positions/Base
22
Spectral power distribution of discharge lamps – POWERSTAR®
23
All rights reserved. No part of this document may be reproduced, copied or distributed in any form
(printed matter, photocopy, etc.) without the written permission of OSRAM GmbH, Germany.
This brochure supersedes all previous editions.
All dimensions, weights, specifications and graphic representations are given without obligation.
All design features, dimensions and technical specifications are subject to change without notice.
POWERSTAR ® HQI®-T
®
UV
FILTER
1
Lamp reference
HQI-T 70 W
WDL
HQI-T 70W/WDL
HQI-T 70 W
NDL
HQI-T 70W/NDL
HQI-T 150 W
WDL
HQI-T 150W/WDL
HQI-T
150 W
NDL
HQI-T 150W/NDL
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K
Colour rendering index
Ra
5300
71
WDL
3000
76
5800
77
NDL
4200
84
13000
87
WDL
3000
77
13000
87
NDL
4200
85
Lamp wattage
Lamp voltage
Lamp current
Ignition voltage min./max.
75
95
1
3.6/5
75
100
1
3.6/5
150
100
1.8
3.6/5
150
100
1.8
3.6/5
Base
Diameter d
mm
Length max. I
mm
LCL a
mm
G12
25
84
56
G12
25
84
56
G12
25
84
56
G12
25
84
56
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
Max. perm. pinch temp.
°C
PF corr. cap. at 50 Hz
µF
universal1)
9000
500
280
12
universal1)
9000
500
280
12
universal1)
9000
550
280
20
universal1)
9000
550
280
20
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300412993
12
1
2/5
MT/UB-70/30/
2A-H-G12-25/84
4050300488424
12
1
2/5
MT/UB-70/42/
1B-H-G12-25/84
4050300873664
12
1
2/5
MT/UB-150/30/
2A-H-G12-25/84
4050300488448
12
1
2/5
MT/UB-150/42/
1B-H-G12-25/84
Survival rate HQI-T 70/WDL
80
60
40
20
0
0
1000
2000
3000
4000 5000
Hours burned
6000
7000
8000
Luminous flux in %
60
40
20
0
1000
2000
3000
4000 5000
Hours burned
6000
60
40
20
0
7000
8000
9000
1000
2000
3000
4000 5000
Hours burned
6000
7000
8000
9000
Luminous flux behaviour HQI-T 70/NDL, 150/WDL and 150/NDL
100
80
0
80
0
9000
Survival rate HQI-T 70/NDL, 150/WDL and 150/NDL
100
Luminous flux behaviour HQI-T 70/WDL
100
Luminous flux in %
Survival rate in %
100
Survival rate in %
W
V
A
kVs
80
60
40
20
0
0
1000
1) For horizontal burning position, mount the holder in the manner that the lamp electrodes are arranged one on top of the other.
2000
3000
4000 5000
Hours burned
6000
7000
8000
9000
POWERSTAR ® HQI®-T, BT
®
UV
FILTER
1
2
Lamp reference
HQI-T 250 W
D
HQI-T 250W/D
HQI-BT 400 W
D, NAV ballast
HQI-BT 400W/D
HQI-BT 400 W
D, HQI ballast
HQI-BT 400W/D
HQI-T 400 W
N, NAV ballast
HQI-T 400W/N
HQI-T
400 W
N, HQI ballast
HQI-T 400W/N
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K
Colour rendering index
Ra
20000
82
D
5200
90
35000
83
D
5200
90
27000
75
D
5900
90
42000
98
N
3500
65
34000
89
N
4000
> 60
Lamp wattage
Lamp voltage
Lamp current
Nominal gear current
Ignition voltage min./max.
W
V
A
A
kVs
250
100
3
–
3/5
420
120
4
4.6
3/5
360
120
3.5
3.5
3/5
430
120
4.0
4.6
4/5
380
120
3.6
3.5
4/5
Base
Diameter d
mm
Length max. I
mm
LCL a
mm
E40
46
225
150
E40
62
285
175
E40
62
285
175
E40
46
275
175
E40
46
275
175
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
Max. perm. base edge temp.
°C
PF corr. cap. at 50 Hz
µF
universal
12000
500
250
32
universal
12000
500
250
45
universal
12000
500
250
35
p 45
12000
500
250
45
p 45
12000
500
250
35
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300015293
12
1
2
MT/UB-250/52/
1A-H-E40-46/225
4050300468471
12
2
2
MC/UB-400/52=59/
1A-H-E40-62/285
4050300468471
12
2
2
MC/UB-400/52=59/
1A-H-E40-62/285
4050300324647
12
1
2
MT/UB-400/35=40/
2B-H-E40-46/275/P45
4050300324647
12
1
2
MT/UB-400/35=40/
2B-H-E40-46/275/P45
Survival rate HQI-T 250/D
80
60
40
20
0
0
8000
10000
40
20
2000
4000
6000
Hours burned
8000
10000
Luminous flux in %
60
40
20
0
2000
4000
20
0
6000
Hours burned
8000
10000
12000
2000
4000
6000
Hours burned
8000
10000
12000
8000
10000
12000
8000
10000
12000
Luminous flux behaviour HQI-BT 400/D
80
60
40
20
0
2000
4000
6000
Hours burned
Luminous flux behaviour HQI-T 400/N
100
80
0
40
0
12000
Survival rate HQI-T 400W/N
100
60
100
60
0
80
0
12000
Luminous flux in %
Survival rate in %
6000
Hours burned
80
0
Survival rate in %
4000
Survival rate HQI-BT 400/D
100
2000
Luminous flux behaviour HQI-T 250/D
100
Luminous flux in %
Survival rate in %
100
80
60
40
20
0
0
2000
4000
6000
Hours burned
POWERSTAR ® HQI®-T
®
UV
FILTER
1
Lamp reference
HQI-T 400 W
BLUE
HQI-T 400W BLUE
HQI-T 400 W
GREEN
HQI-T 400W GREEN
HQI-T
400 W
MAGENTA
HQI-T 400W MAGENTA
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K
Colour rendering index
Ra
uncertain
uncertain
BLUE
monochr.
–
uncertain
uncertain
GREEN
monochr.
–
uncertain
uncertain
MAGENTA
monochr.
–
Lamp wattage
Lamp voltage
Lamp current
Nominal gear current
Ignition voltage min./max.
W
V
A
A
kVs
360
120
3.6
3.5
3/5
360
120
3.6
3.5
3/5
440
120
4.2
4.6
4/5
Base
Diameter d
mm
Length max. I
mm
LCL a
mm
E40
46
275
175
E40
46
275
175
E40
46
275
175
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
Max. perm. base edge temp.
°C
PF corr. cap. at 50 Hz
µF
p 55
6000
500
250
35
p 55
6000
500
250
35
p 55
6000
500
250
45
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300575971
12
1
2
MT-400/BLUE/
H-E40-46/260/P55
4050300575957
12
1
2
MT-400/GREEN/
H-E40-46/260/P55
4050300649535
12
1
2
MT-400/MAGENTA/
H-E40-46/275/P55
POWERSTAR ® HQI®-T
®
UV
FILTER
1
2
HQI-T HQI-T HQI-T 1000 W
1000 W
2000 W
D
N
D
Lamp reference
HQI-T HQI-T HQI-T 1000W/D
1000W/N
2000W/D
HQI-T 2000 W
N
/E SUPER
HQI-T 2000W/N/E SUPER
HQI-T
2000 W
N
/SN SUPER
HQI-T
2000W/N/SN SUPER
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K Colour rendering index
Ra
85000
81
D
7250
90
110000
110
N
3500
65
180000
88
D
7250
90
240000
120
N
4400
65
240000
120
N
4400
65
Lamp wattage
Mains voltage
Lamp voltage
Lamp current
Nominal gear current
Ignition voltage min./max.
1050
230
130
8.9
9.5
4/5
1000
230
125
9.1
9.5
4/5
2050
400
230
10.2
10.3
4/5
2000
400
220
9.4
8.8
4/5
2000
400
220
9.4
8.8
0.9/1.3
Base
Diameter d
mm
Length max. I
mm
LCL a
mm
E40
76
345
220
E40
76
345
220
E40
100
430
265
E40
100
430
265
E40
100
430
265
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
Max. perm. base edge temp.
°C
PF corr. cap. at 50 Hz
µF
p 30
9000
500
250
85
p 30
9000
500
250
85
p 30
9000
500
250
60
p 60
9000
500
250
37
p 60
9000
500
250
37
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300015323
6
1
2
MT-1000/72/1A-H-
E40-76/345/P30
4008321116604
6
1
2
MT-1000/35/2B-H-
E40-76/345/P30
4050300015330
4
2
2
MT-2000/72/1A-E-
E40-100/430/P30
4050300301860
4
2
2
MT-2000/44/2B-E-
E40-100/430/P60
4050300348629
4
2
2
MT-2000/44/2B-EE40-100/430/P60
Survival rate HQI-T 1000W/D
80
60
40
20
0
0
3000
4000 5000
Hours burned
6000
7000
8000
60
40
20
0
1000
2000
3000
4000 5000
Hours burned
6000
7000
8000
Luminous flux in %
60
40
20
0
1000
2000
3000
20
0
4000 5000
Hours burned
6000
7000
8000
9000
1000
2000
3000
4000 5000
Hours burned
6000
7000
8000
9000
6000
7000
8000
9000
8000
9000
Luminous flux behaviour HQI-T 1000W/N
80
60
40
20
0
1000
2000
3000
4000 5000
Hours burned
Luminous flux behaviour HQI-T 2000W/D, /N E, /N SN SUPER
100
80
0
40
0
9000
Survival rate HQI-T 2000W/D, /N E, /N SN SUPER
100
60
100
80
0
80
0
9000
Luminous flux in %
Survival rate in %
2000
Survival rate HQI-T 1000W/N
100
Survival rate in %
1000
Luminous flux behaviour HQI-T 1000W/D
100
Luminous flux in %
Survival rate in %
100
W
V
V
A
A
kVs
80
60
40
20
0
0
1000
2000
3000
4000 5000
Hours burned
6000
7000
POWERSTAR ® HQI®-T
®
UV
FILTER
1
Lamp reference
HQI-T 2000 W
N
230 V
HQI-T 2000W/N/230 V
HQI-T 2000 W
D
/I
HQI-T 2000W/D/I
HQI-T
2000 W
N
integrated igniter
HQI-T
2000W/N
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K
Colour rendering index
Ra
191000
98
N
4400
65
180000
88
D
7250
90
205000
103
D
4200
65
Lamp wattage
Mains voltage
Lamp voltage
Lamp current
Nominal gear current
Ignition voltage min./max.
1950
230
120
19
2 x 8.25
0.7
2050
400
230
10.3
10.3
not reqd.
2000
400
230
9.0
8.8
not reqd.
Base
Diameter d
mm
Length max. I
mm
LCL a
mm
E40
100
430
265
E40
100
430
265
E40
100
430
265
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
Max. perm. base edge temp.
°C
PF corr. cap. at 50 Hz
µF
p 30
9000
500
250
125
p 30
9000
500
250
60
p 60
9000
500
250
37
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300421582
4
1
2
MT-2000/44/2B-E-E40-100/430/P30
4050300015446
4
1
1
MT-2000/72/1A-E/I-E40-100/430/P30
4050300015347
4
1
1
MT-2000/42/2B-E/I-E40-100/430/P60
Survival rate HQI-T 2000W/N 230V
80
60
40
20
0
0
2000
3000
4000 5000
Hours burned
6000
7000
8000
Luminous flux in %
60
40
20
0
1000
2000
3000
4000 5000
Hours burned
6000
7000
8000
Luminous flux in %
60
40
20
0
1000
2000
3000
4000 5000
Hours burned
20
0
6000
7000
8000
9000
1000
2000
3000
4000 5000
Hours burned
6000
7000
8000
9000
6000
7000
8000
9000
8000
9000
Luminous flux behaviour HQI-T 2000W/D/I
80
60
40
20
0
1000
2000
3000
4000 5000
Hours burned
Luminous flux behaviour HQI-T 2000W N integrated igniter
100
80
0
40
0
9000
Survival rate HQI-T 2000W N integrated igniter
100
60
100
80
0
80
0
9000
Survival rate HQI-T 2000W/D/I
100
Survival rate in %
1000
Luminous flux behaviour HQI-T 2000W/N 230V
100
Luminous flux in %
Survival rate in %
100
Survival rate in %
W
V
V
A
A
kVs
80
60
40
20
0
0
1000
2000
3000
4000 5000
Hours burned
6000
7000
POWERSTAR ® HQI®-TS Excellence1)
®
UV
FILTER
1
Lamp reference
HQI-TS Excellence
70 W
WDL
HQI-TS
70W/WDL Exc
HQI-TS Excellence
70 W
NDL
HQI-TS
70W/NDL Exc
HQI-TS Excellence
70 W
D
HQI-TS
70W/D Exc
HQI-TS Excellence
150 W
WDL
HQI-TS
150W/WDL Exc
HQI-TS Excellence
150 W
NDL
HQI-TS
150W/NDL Exc
HQI-TS Excellence
150 W
D
HQI-TS
150W/D Exc
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K Colour rendering index
Ra
6200
80
WDL
3000
75
6500
83
NDL
4200
85
6200
80
D
5600
80
12000
80
WDL
3000
75
12500
83
NDL
4200
85
13500
90
D
5600
80
Lamp wattage
Lamp voltage
Lamp current
Nominal gear current
Ignition voltage min./max.
W
V
A
A
kVs
78
100
1
1
3.6/5
78
100
1
1
3.6/5
78
100
1
1
3.6/5
150
95
1.8
1.8
3.6/5
150
95
1.8
1.8
3.6/5
150
100
1.8
1.8
3.6/5
Base
Diameter d
mm
Length max. l
mm
LCL a
mm
RX7s
19
117
58.5
RX7s
19
117
58.5
RX7s
19
117
58.5
RX7s-24
23
135
67.5
RX7s-24
23
135
67.5
RX7s-24
23
135
67.5
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
Max. perm. outer bulb border temp. °C
PF corr. cap. at 50 Hz
µF
p 45
12000
500
350
12
p 45
12000
500
350
12
p 45
12000
500
350
12
p 45
12000
650
350
20
p 45
12000
650
350
20
p 45
12000
650
350
20
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4008321149619
12
1
2/3/5
MD/UB-70/30/2A-H-
RX7s/114.2/p45
4008321149596
12
1
2/3/5
MD/UB-70/42/1B-H-
RX7s/114.2/p45
40083211495572
12
1
2/5
MD/UB-70/56/1B-H-
RX7s/114.2/p45
4008321149695
4008321149671
4008321149657
12
12
12
1
1
1
2/3/5
2/3/5
2/5
MD/UB-150/30/2A-H- MD/UB-150/42/1B-H- MD/UB-150/52/1B-HRX7s=24/132/p45 RX7s=24/132/p45 RX7s=24/132/p45
Survival rate HQI-TS Excellence 70/WDL, /NDL, /D
80
60
40
20
0
0
8000
10000
40
20
2000
4000
6000
Hours burned
8000
10000
Luminous flux in %
60
40
20
0
2000
4000
6000
Hours burned
1) T he new HQI-TS Excellence replaces the previous HQI-TS.
20
0
8000
10000
12000
2000
4000
6000
Hours burned
8000
10000
12000
10000
12000
10000
12000
Luminous flux behaviour HQI-TS Excellence 150/WDL
80
60
40
20
0
2000
4000
6000
Hours burned
8000
Luminous flux behaviour HQI-TS Excellence 150/NDL, /D
100
80
0
40
0
12000
Survival rate HQI-TS Excellence 150/NDL, /D
100
60
100
60
0
80
0
12000
Luminous flux in %
Survival rate in %
6000
Hours burned
80
0
Survival rate in %
4000
Survival rate HQI-TS Excellence 150/WDL
100
2000
Luminous flux behaviour HQI-TS Excellence 70/WDL, /NDL, /D
100
Luminous flux in %
Survival rate in %
100
80
60
40
20
0
0
2000
4000
6000
Hours burned
8000
POWERSTAR ® HQI®-TS
®
UV
FILTER
1
2
Lamp reference
HQI-TS 250 W
WDL
HQI-TS 250W/WDL
HQI-TS 250 W
NDL
HQI-TS 250W/NDL
HQI-TS 250 W
D
HQI-TS 250W/D
HQI-TS 400 W
NDL
HQI-TS 400W/NDL
HQI-TS 400 W
D, NAV ballast
HQI-TS 400W/D
HQI-TS
400 W
D, HQI ballast
HQI-TS 400W/D
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K Colour rendering index
Ra
22000
88
WDL
3200
80
20000
82
NDL
4200
88
20000
82
D
5100
93
38000
90
NDL
4200
88
37000
90
D
5200
93
31000
89
D
5600
90
Lamp wattage
Lamp voltage
Lamp current
Ignition voltage min./max.
W
V
A
kVs
250
110
2.8
3.6/5
250
100
3
3.6/5
250
100
3
3/5
400
120
4.11)
3/5
400
125
4.1
3/5
350
120
3.6
3/5
Base
Diameter d
mm
Length max. I
mm
LCL a
mm
Fc2
25
163
81.5
Fc2
25
163
81.5
Fc2
25
163
81.5
Fc2
31
206
103
Fc2
31
206
103
Fc2
31
206
103
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
Max. perm. pinch temp.
°C
PF corr. cap. at 50 Hz
µF
p 45
12000
650
300
32
p 45
12000
650
300
32
p 45
12000
650
300
32
p 45
12000
650
300
45
p 45
12000
650
300
45
p 45
12000
650
300
35
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300436012
12
1
2/3
MD/UB-250/32/1B-
H-Fc2-25/163/P45
4050300436036
12
1
2/3
MD/UB-250/42/1B-
H-Fc2-25/163/P45
4050300436050
12
1
2
MD/UB-250/51/1A-
H-Fc2-25/163/P45
4050300304090
12
2
2/3
MD/UB-400/42/1B-
H-Fc2-31/206/P45
4050300015385
4050300015385
12
12
2
2
2
2
MD/UB-400/52=56/ MD/UB-400/52=56/
1A-H-Fc2-31/206/P451A-H-Fc2-31/206/P45
Survival rate HQI-TS 250/NDL, /D
80
60
40
20
0
0
6000
Hours burned
8000
10000
60
40
20
0
2000
4000
6000
Hours burned
8000
10000
Luminous flux in %
60
40
20
0
2000
1) Operate only with NAV control gear.
4000
20
0
6000
Hours burned
8000
10000
12000
2000
4000
6000
Hours burned
10000
12000
8000
10000
12000
8000
10000
12000
8000
Luminous flux behaviour HQI-TS 250/WDL, 400/NDL
80
60
40
20
0
2000
4000
6000
Hours burned
Luminous flux behaviour HQI-TS 400/D
100
80
0
40
0
12000
Survival rate HQI-TS 400/D
100
60
100
80
0
80
0
12000
Luminous flux in %
Survival rate in %
4000
Survival rate HQI-TS 250/WDL, 400/NDL
100
Survival rate in %
2000
Luminous flux behaviour HQI-TS 250/NDL, /D
100
Luminous flux in %
Survival rate in %
100
80
60
40
20
0
0
2000
4000
6000
Hours burned
POWERSTAR ® HQI®-TS
l1
l1
1
2
Lamp reference
HQI-TS 1000 W
NDL
/S
HQI-TS 1000W/NDL/S
HQI-TS 1000 W
D
/S
HQI-TS 1000W/D/S
HQI-TS
2000 W
D
/S
HQI-TS 2000W/D/S
HQI-TS
2000 W
D
/S High Flux
HQI-TS 2000W/D/S High Flux
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K Colour rendering index
Ra
90000
90
NDL
4400
> 85
90000
90
D
5900
90
200000
103
D
5900
90
220000
107
D
5900
90
Lamp wattage
Mains voltage
Lamp voltage
Lamp current
Nominal gear current
Hot restrike
Ignition voltage min./max.
W
V
V
A
A
kVs
kVs
1000
230
125
9.2
9.5
36
4/5
1000
230
120
9.4
9.5
36
4/5
1950
400
200
11.5
10.3
36
4/5
2060
400
200
12.2
12.2
36
4/5
Base
Diameter d
mm
Insertion length l1 max.
mm
Length max. I
mm
Total length min.
mm
LCL a
mm
cable
36
157
187
285
93
cable
36
157
187
285
93
cable
36
157
187
285
93
cable
36
157
187
285
93
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
°C
Max. perm. pinch temp.
PF corr. cap. at 50 Hz
µF
ACGIH UV output
mW/lm² · 1000 lx
p 15
6000
950
390
85
< 34
p 15/s 15
6000
950
390
85
< 92
p 15
4000
950
390
60
< 33
p 15
2500
950
390
70
< 75
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300349916
10
1
2/3
MN-1000/44/1B-H-
cable lug-36/187/P15
4050300300092
10
1
2/3
MN-1000/59/1A-H-
cable lug-36/187/P15/S15
4050300271682
10
2
2/4
MN-2000/59/1A-E-
cable lug-36/187/P15
4008321338310
10
2
2/4
MN-2000/59/1A-Ecable lug-36/187/P15
Survival rate HQI-TS 1000W NDL S
80
60
40
20
0
0
4000
5000
40
20
1000
2000
3000
Hours burned
4000
5000
Luminous flux in %
60
40
20
0
1000
2000
Hours burned
20
0
3000
4000
1000
2000
3000
Hours burned
4000
5000
6000
4000
5000
6000
Luminous flux behaviour HQI-TS 1000W D S
80
60
40
20
0
1000
2000
3000
Hours burned
Luminous flux behaviour HQI-TS 2000W D S
100
80
0
40
0
6000
Survival rate HQI-TS 2000W D S
100
60
100
60
0
80
0
6000
Luminous flux in %
Survival rate in %
3000
Hours burned
80
0
Survival rate in %
2000
Survival rate HQI-TS 1000W D S
100
10
1000
Luminous flux behaviour HQI-TS 1000W NDL S
100
Luminous flux in %
Survival rate in %
100
80
60
40
20
0
0
1000
2000
Hours burned
3000
4000
POWERSTAR ® HQI®-TS
l1
l1
1
2
Lamp reference
HQI-TS 2000 W
NDL
/S
HQI-TS 2000W/NDL/S
HQI-TS 2000 W
N
/L
HQI-TS 2000W/N/L
HQI-TS
2000 W
D
/L
HQI-TS 2000W/D/L
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K Colour rendering index
Ra
215000
110
NDL
4400
> 85
230000
107
N
4200
> 65
205000
95
D
5400
> 85
Lamp wattage
Mains voltage
Lamp voltage
Lamp current
Nominal gear current
Hot restrike
Ignition voltage min./max.
W
V
V
A
A
kVs
kVs
1950
400
205
11.3
10.3
36
4/5
2150
400
225
10.7
10.3
–
4/5
2150
400
240
9.7
10.3
36
4/5
Base
Diameter d
mm
Insertion length l1 max.
mm
Length max. I
mm
Total length min.
mm
LCL a
mm
cable
36
157
187
285
93
cable
32
244
274
374
137
cable
32
244
274
374
137
Burning position
p 15
Average lamp life
h
5000
Max. perm. outer bulb temp.
°C
950
°C
390
Max. perm. pinch temp.
PF corr. cap. at 50 Hz
µF
60
ACGIH UV output
mW/lm² · 1000 lx
p 15
8000
950
390
60
< 148
p 15
8000
950
390
60
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300607344
10
2
2/4
MN-2000/42/2B-E-
cable lug-36/274/P15
4008321931825
10
2
2/4
MN-2000/54/1B-Ecable lug-36/274/P15
Survival rate HQI-TS 2000W NDL S
80
60
40
20
0
0
2000
3000
Hours burned
4000
Luminous flux in %
60
40
20
0
1000
2000
3000
4000
5000
Hours burned
6000
7000
Luminous flux in %
60
40
20
0
1000
2000
3000
4000
5000
Hours burned
20
0
6000
7000
8000
1) L amps to be operated in axially symmetrical luminaires only where the lamp is situated along the axis.
1000
2000
3000
Hours burned
4000
5000
Luminous flux behaviour HQI-TS 2000W N L
80
60
40
20
0
1000
2000
3000
4000
5000
Hours burned
6000
7000
8000
6000
7000
8000
Luminous flux behaviour HQI-TS 2000W D L
100
80
0
40
0
8000
Survival rate HQI-TS 2000W D L
100
60
100
80
0
80
0
5000
Survival rate HQI-TS 2000W N L
100
Survival rate in %
1000
Luminous flux behaviour HQI-TS 2000W NDL S
100
Luminous flux in %
Survival rate in %
100
Survival rate in %
4008321910196
10
1
2/4
MN-2000/44/1B-E-
cable lug-36/187/P15
80
60
40
20
0
0
1000
2000
3000
4000
5000
Hours burned
11
POWERSTAR ® HQI®-E for open luminaires
®
UV
FILTER
1
2
Lamp reference
HQI-E
70 W
WDL
clear
for open luminaires
HQI-E
70W/WDL clear
HQI-E
70 W
WDL
coated
for open luminaires
HQI-E
70W/WDL coated
HQI-E
70 W
NDL
clear
for open luminaires
HQI-E
70W/NDL clear
HQI-E
70 W
NDL
coated
for open luminaires
HQI-E
70W/NDL coated
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K Colour rendering index
Ra
5200
71
WDL
3000
70
4700
64
WDL
2900
70
5500
75
NDL
4200
80
5100
70
NDL
4000
80
Lamp wattage
Lamp voltage
Lamp current
Ignition voltage min./max.
73
95
0.95
3.6/5
73
95
0.95
3.6/5
73
95
1
3.6/5
73
95
1
3.6/5
Base
Diameter d
mm
Length max. I
mm
LCL a
mm
E27
55
144
92
E27
55
144
–
E27
55
144
92
E27
55
144
–
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
Max. perm. base edge temp.
°C
PF corr. cap. at 50 Hz
µF
universal
9000
330
210
12
universal
9000
330
210
12
universal
6000
330
210
12
universal
6000
330
210
12
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300397788
20
1
2/5
MCS/UB-70/30/
2A-H-E27-55/144
4050300397801
20
2
2/5
MES/UB-70/29/
2A-H-E27-55/144
4050300397825
20
1
2/5
MCS/UB-70/42/
1B-H-E27-55/144
4050300397849
20
2
2/5
MES/UB-70/40/
1B-H-E27-55/144
Survival rate HQI-E 70/WDL
80
60
40
20
0
0
2000
3000
4000 5000
Hours burned
6000
7000
8000
Luminous flux in %
60
40
20
0
1000
2000
60
40
20
0
3000
Hours burned
4000
5000
6000
1000
2000
3000
4000 5000
Hours burned
6000
7000
8000
9000
Luminous flux behaviour HQI-E 70/NDL
100
80
0
80
0
9000
Survival rate HQI-E 70/NDL
100
Survival rate in %
1000
Luminous flux behaviour HQI-E 70/WDL
100
Luminous flux in %
Survival rate in %
100
12
W
V
A
kVs
80
60
40
20
0
0
1000
2000
3000
Hours burned
4000
5000
6000
POWERSTAR ® HQI®-E for open luminaires
®
UV
FILTER
1
2
Lamp reference
HQI-E
100 W
WDL
clear
for open luminaires
HQI-E
100W/WDL clear
HQI-E
100 W
WDL
coated
for open luminaires
HQI-E
100W/WDL coated
HQI-E
100 W
NDL
clear
for open luminaires
HQI-E
100W/NDL clear
HQI-E
100 W
NDL
coated
for open luminaires
HQI-E
100W/NDL coated
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K Colour rendering index
Ra
8500
85
WDL
3000
70
7900
79
WDL
2900
70
8400
84
NDL
4200
85
7700
77
NDL
4000
85
Lamp wattage
Lamp voltage
Lamp current
Ignition voltage min./max.
100
95
1.1
3.6/5
100
95
1.1
3.6/5
100
95
1.1
3.6/5
100
95
1.1
3.6/5
Base
Diameter d
mm
Length max. I
mm
LCL a
mm
E27
55
144
92
E27
55
144
–
E27
55
144
92
E27
55
144
–
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
Max. perm. base edge temp.
°C
PF corr. cap. at 50 Hz
µF
universal
9000
330
210
16
universal
9000
330
210
16
universal
6000
330
210
16
universal
6000
330
210
16
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300351537
20
1
2
MCS/UB-100/30/
2A-H-E27-55/144
4050300351551
20
2
2
MES/UB-100/29/
2A-H-E27-55/144
4050300345871
20
1
2
MCS/UB-100/42/
1B-H-E27-55/144
4050300345833
20
2
2
MES/UB-100/40/
1B-H-E27-55/144
Survival rate HQI-E 100/WDL
80
60
40
20
0
0
1000
2000
3000
4000 5000
Hours burned
6000
7000
8000
Luminous flux in %
60
40
20
0
1000
2000
60
40
20
0
3000
Hours burned
4000
5000
6000
1000
2000
3000
4000 5000
Hours burned
6000
7000
8000
9000
Luminous flux behaviour HQI-E 100/NDL
100
80
0
80
0
9000
Survival rate HQI-E 100/NDL
100
Luminous flux behaviour HQI-E 100/WDL
100
Luminous flux in %
Survival rate in %
100
Survival rate in %
W
V
A
kVs
80
60
40
20
0
0
1000
2000
3000
Hours burned
4000
5000
6000
13
POWERSTAR ® HQI®-E for open luminaires
®
UV
FILTER
1
2
Lamp reference
HQI-E
150 W
WDL
clear
for open luminaires
HQI-E
150W/WDL clear
HQI-E
150 W
WDL
coated
for open luminaires
HQI-E
150W/WDL coated
HQI-E
150 W
NDL
clear
for open luminaires
HQI-E
150W/NDL clear
HQI-E
150 W
NDL
coated
for open luminaires
HQI-E
150W/NDL coated
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K Colour rendering index
Ra
12900
86
WDL
3000
70
11600
77
WDL
2900
70
12500
83
NDL
4200
83
11500
77
NDL
4000
86
Lamp wattage
Lamp voltage
Lamp current
Ignition voltage min./max.
150
95
1.8
3.6/5
150
95
1.8
3.6/5
150
85
1.8
3.6/5
150
85
1.8
3.6/5
Base
Diameter d
mm
Length max. I
mm
LCL a
mm
E27
55
144
92
E27
55
144
–
E27
55
144
92
E27
55
144
–
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
Max. perm. base edge temp.
°C
PF corr. cap. at 50 Hz
µF
universal
9000
330
210
20
universal
9000
330
210
20
universal
6000
330
210
20
universal
6000
330
210
20
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300433974
20
1
2/5
MCS/UB-150/30/
2A-H-E27-55/144
4050300433998
20
2
2/5
MES/UB-150/29/
2A-H-E27-55/144
4050300434018
20
1
2/5
MCS/UB-150/42/
1B-H-E27-55/144
4050300434032
20
2
2/5
MES/UB-150/40/
1B-H-E27-55/144
Survival rate HQI-E 150/WDL
80
60
40
20
0
0
2000
3000
4000 5000
Hours burned
6000
7000
8000
Luminous flux in %
60
40
20
0
1000
2000
60
40
20
0
3000
Hours burned
4000
5000
6000
1000
2000
3000
4000 5000
Hours burned
6000
7000
8000
9000
Luminous flux behaviour HQI-E 150/NDL
100
80
0
80
0
9000
Survival rate HQI-E 150/NDL
100
Survival rate in %
1000
Luminous flux behaviour HQI-E 150/WDL
100
Luminous flux in %
Survival rate in %
100
14
W
V
A
kVs
80
60
40
20
0
0
1000
2000
3000
Hours burned
4000
5000
6000
POWERSTAR ® HQI®-E/P for open luminaires
®
UV
FILTER
1
Lamp reference
HQI-E/P
250 W
D
coated
for open luminaires
HQI-E/P
250W/D
HQI-E/P
400 W
D
coated
for open luminaires, NAV ballast
HQI-E/P
400W/D
HQI-E/P
400 W
D
coated
for open luminaires, HQI ballast
HQI-E/P
400W/D
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K Colour rendering index
Ra
17000
71
D
5200
90
31000
76
D
4700
90
25000
71
D
5200
90
Lamp wattage
Lamp voltage
Lamp current
Ignition voltage min./max.
W
V
A
kVs
250
100
3
3/5
430
110
3.8
3/5
380
115
3.5
3/5
Base
Diameter d
mm
Length max. I
mm
LCL a
mm
E40
90
226
–
E40
120
290
–
E40
120
290
–
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
Max. perm. base edge temp.
°C
PF corr. cap. at 50 Hz
µF
universal
6000
400
250
32
universal
12000
400
250
45
universal
12000
400
250
35
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300637457
12
1
2
MES/UB-250/52/1A-H-E40-90/226
4050300637433
12
1
2
MES/UB-400/47=52/1A-H-E40-120/290
4050300637433
12
1
2
MES/UB-400/47=52/1A-H-E40-120/290
Survival rate HQI-EP 400/D
80
60
40
20
0
0
2000
4000
Luminous flux behaviour HQI-EP 400/D
100
Luminous flux in %
Survival rate in %
100
6000
Hours burned
8000
10000
12000
80
60
40
20
0
0
2000
4000
6000
Hours burned
8000
10000
12000
15
POWERSTAR ® HQI®-E
®
UV
FILTER
1
Lamp reference
HQI-E
250 W
D
coated
HQI-E
250W/D
HQI-E
400 W
D
coated, NAV ballast
HQI-E
400W/D
HQI-E
400 W
D
coated, HQI ballast
HQI-E
400W/D
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K Colour rendering index
Ra
19000
78
D
5200
90
34000
81
D
5300
90
26000
72
D
5500
90
460
130
3.8
4.6
3/5
400
110
3.6
3.5
3/5
Lamp wattage
Lamp voltage
Lamp current
Nominal gear current
Ignition voltage min./max.
Base
Diameter d
mm
Length max. I
mm
LCL a
mm
E40
90
226
–
E40
120
290
–
E40
120
290
–
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
Max. perm. base edge temp.
°C
PF corr. cap. at 50 Hz
µF
universal
12000
400
250
32
universal
12000
400
250
45
universal
12000
400
250
35
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300015248
12
1
2
ME/UB-250/52/
1A-H-E40-90/226
4050300019727
12
1
2
ME/UB-400/53=55/
1A-H-E40-120/290
4050300019727
12
1
2
ME/UB-400/53=55/
1A-H-E40-120/290
Survival rate HQI-E 250/D
80
60
40
20
0
0
4000
6000
Hours burned
8000
10000
Luminous flux in %
60
40
20
0
2000
4000
60
40
20
0
6000
Hours burned
8000
10000
12000
2000
4000
6000
Hours burned
8000
10000
12000
8000
10000
12000
Luminous flux behaviour HQI-E 400/D
100
80
0
80
0
12000
Survival rate HQI-E 400/D
100
Survival rate in %
2000
Luminous flux behaviour HQI-E 250/D
100
Luminous flux in %
Survival rate in %
100
16
W
250
V
100
A
3
A
kVs
3/5
80
60
40
20
0
0
2000
4000
6000
Hours burned
POWERSTAR ® HQI®-E
®
UV
FILTER
1
2
Lamp reference
HQI-E
400 W
N
clear, NAV ballast
HQI-E
400W/N clear
HQI-E
400 W
N
clear, HQI ballast
HQI-E
400W/N clear
HQI-E
400 W
N
coated, NAV ballast
HQI-E
400W/N HQI-E
400 W
N
coated, HQI ballast
HQI-E
400W/N HQI-E
1000 W
N
coated
HQI-E
1000W/N
Nominal luminous flux
lm
Luminous efficacy
lm/W
Light colour/Colour appearance
Colour temperature
K Colour rendering index
Ra
42000
95
N
4000
65
34000
90
N
4600
65
40000
91
N
3800
65
34000
90
N
4400
65
100000
95
N
3800
65
Lamp wattage
Lamp voltage
Lamp current
Nominal gear current
Ignition voltage min./max.
W
V
A
A
kVs
440
120
4
4.6
4/5
380
120
3.4
3.5
4/5
440
120
4
4.6
4/5
380
120
3.4
3.5
4/5
1050
125
9.5
9.5
4/5
Base
Diameter d
mm
Length max. I
mm
LCL a
mm
E40
120
285
198
E40
120
285
198
E40
120
285
–
E40
120
285
–
E40
165
380
–
Burning position
Average lamp life
h
Max. perm. outer bulb temp.
°C
Max. perm. base edge temp.
°C
PF corr. cap. at 50 Hz
µF
h45
12000
500
250
45
h45
12000
500
250
35
h45
12000
500
250
45
h45
12000
500
250
35
h 45
9000
400
250
85
EAN
Standard pack
Qty
Figure
No.
Circuit (see page 22)
Fig. no.
ILCOS
4050300292632
4050300292632
4050300305431
4050300305431
4050300015279
12
12
12
12
6
1
1
2
2
2
2
2
2
2
2
MC/UB-400/40=46/ MC/UB-400/40=46/ ME/UB-400/38=44/
ME/UB-400/38=44/
ME-1000/38/
2B-H-E40-120/285/H452B-H-E40-120/285/H452B-H-E40-120/285/H452B-H-E40-120/285/H452B-H-E40-165/380/H45
Survival rate HQI-E 400W/N
80
60
40
20
0
0
4000
6000
Hours burned
8000
10000
Luminous flux in %
60
40
20
0
1000
2000
3000
60
40
20
0
4000 5000
Hours burned
6000
7000
8000
9000
2000
4000
6000
Hours burned
8000
10000
12000
Luminous flux behaviour HQI-E 1000W/N
100
80
0
80
0
12000
Survival rate HQI-E 1000W/N
100
Survival rate in %
2000
Luminous flux behaviour HQI-E 400W/N
100
Luminous flux in %
Survival rate in %
100
80
60
40
20
0
0
1000
2000
3000
4000 5000
Hours burned
6000
7000
8000
9000
17
Please note:
The values and curves published in this document are
for guidance only. The basic data was determined under
controlled laboratory conditions for a switching cycle of
11 h on/1 h off.
There may be considerable differences in actual practice.
PF correction capacitor:
The pf correction capacitors are designed so that
cos w > 0.9 is achieved at rated voltage.
Operating instructions
Supply voltage:
The lamps must be connected via suitable control gear. A
240 V / 50 Hz ac supply is generally required. If a different
supply voltage is used (e.g. 400 V / 50 Hz) control gear
with appropriate taps must be used.
Permitted mains voltage deviation: ± 3%
Sudden fluctuations in mains voltage of more than 10%
may cause the lamps to go out.
If the deviation from rated supply voltage (230 V or 400 V)
is permanent, high-pressure discharge lamps may exhibit
changes in colour or luminous flux. Lamp life may also be
reduced.
High-pressure discharge lamps should therefore only be
operated with control gear with thermal protection.
This applies also to control gear with the option of power
reduction.
The following lamps with integrated igniters don’t
need external igniter:
c HQI®-T 2000 /D/I
c HQI®-T 2000 /N
The lamps must not be operated with integrated igniters
in luminaires equipped with igniters.
Suitable igniters and control gear for POWERSTAR ® are
available from the electrical industry.
Operation of HQI-TS Excellence at PT-TS ballast – which
are not produced or sold anymore for very long time – is
not permitted.
Control gear:
Conventional control gear: Choke, igniter and pf correction capacitor.
The right igniter for the particular lamp type must be used
to ensure reliable and safe ignition.
Igniters must always be installed close to the lamp.
The choke may be installed any distance from the lamp,
provided the permissible voltage drop is not exceeded.
For power supplies with a neutral conductor the choke
should be connected to the live conductor. In the case of
luminaires in which there are no lamps installed, the ignition equipment (igniter, ignition pulser) must be disabled
when voltage is applied otherwise the igniters may produce radio interference.
The chokes and pf correction capacitors generally needed
for operating discharge lamps may, under certain conditions, create oscillating circuits. These circuits may then
produce excessive currents and voltages, which in turn
can destroy the lamps, ballasts and capacitors. Such
resonance phenomena must be avoided by appropriate
circuits and fuses.
When high-pressure discharge lamps come to the end of
their lives a rectifier effect may occur (see IEC 62035).
This is not manufacturer-specific. Because of the excessive dc current components the ballasts and igniters may
become overheated.
18
Operating temperatures:
Only high-pressure discharge lamps with external
igniters are suitable for low-temperature applications
down to – 50 °C. Such applications call for special
(heatable) igniters such as MZN 400 SU-LT from BAG
Turgi (for lamps from 100 to 400 W).
Power factor:
CCG: Because of the series connected choke this is
around 0.5 to 0.7 (without compensation)
ECG: If POWERTRONIC ® is used the power factor is
greater than 0.96. Compensation is therefore not
needed here.
Switching on:
Full luminous flux is reached only a few minutes after the
lamp is switched on. The start-up current may be up to
twice the operating current depending on the control gear.
(See also the graphs on p. 21)
Fusing:
Guarantee:
HQI® lamps must be protected by slow acting fuses. If
fuse wire is used it is sufficient for it to be rated at twice
the rated current of the lamp. If automatic cutouts are
used they should have characteristic “C”. If adjusted to
the upper limit value of 10 x rated current there will be
no triggering if fuse protection is at twice the rated lamp
current.
A guarantee can only made if suitable control gear is used
and the defined operating conditions are met.
Restarting:
The lamps will restart only after they have cooled down
for 2 to 15 minutes.
Instant restarting with suitable igniters is possible for:
c HQI-TS < 400 W
c HQI-TS 1000 W/D/S and 2000 W/D/S (short arc)
c HQI-TS 2000 W/D/L (long arc)
The necessary surge voltage is 25 to 60 kVs.
Lampholders:
Because of the high voltages involved in ignition the
lampholders must be designed for these high voltages.
Lampholders that meet these requirements are available
from appropriate manufacturers.
Power reduction:
Dimming metal halide lamps is not recommended.
OSRAM cannot provide a guarantee for dimmed
lamps.
Dimming adversely affects colour rendering. The colour
location shifts towards colder light colours and the colour
spread increases. Dimmed lamps also tend to flicker. Luminous flux maintenance is significantly worse as a result
of dimming. Dimming can shorten the life of the lamps.
End of life:
To protect the control gear and to avoid radio interference, high-pressure discharge lamps must be replaced
as soon as they come to the end of their life.
These lamps reach their end of life when
c the light colour of the lamp changes dramatically
c there is a significant loss of brightness
c the lamp no longer ignites
c the lamp starts to cycle (periodically goes out and
ignites again).
At end of lamp life the risk of a broken burner rises.
This phenomena is caused by effects not dependent on
the manufacturer like the rectifying effect mentioned earlier. Because of this we strongly recommend to change
the lamp latest after average lifetime has been reached or
if one of the above mentioned effects are shown.
Safety:
OSRAM high-pressure lamps meet the safety requirements defined in IEC 62035.
All HQI lamps with outer bulb are of UV reduced
design and comply with necessary limits
(ACGIH < 2 mW/1000 Im).
Because of their high operating pressure all HQI-lamps
may only be used in fully enclosed luminaires designed to
take them:
c All HQI®-TS
c All HQI®-T
c All HQI®-E > 250 W
As we cannot completely rule out the possibility of the
bulb bursting, luminaires for the lamps mentioned above
must be equipped with sealed shatter-proof shields that
can withstand wide fluctuations in temperature.
Operating lamps with a damaged outer bulb is dangerous
and therefore not permitted. Exception: HQI®-TS ...
without an outer bulb.
Lamp operation:
Operating high-pressure lamps for short periods in combination with frequent on/off switching will shorten their life.
This applies to both cold starting and hot restarts. The
lamps should be operated for at least 3 hours and should
remain off for at least 30 minutes. This applies in particular to HQI® = 1000 W.
Exceptions:
The following lamps are suitable for open luminaires:
c All HQI®-E 70 W to 150 W
c All HQI®-E/P
The use of shields should be considered for safety
reasons in each case.
Luminaire design:
Luminaire design (thermal design and fuse protection)
should be based on the EN 60598-1 standard.
HQI® 1000 W to 2000 W lamps should be held without
pressure or by means of a lamp support close to the
base-free end.
Notes on disposal:
All metal halide lamps contain small quantities of mercury.
If they break, poisonous mercury vapour may be released.
The lamps must be treated as waste requiring special
supervision with EEC code 20 01 21* for waste or residue
containing mercury and should be passed to a relevant
collection or recycling company.
19
Photometric and electrical data:
All lamp-specific electrical and photometric data is
measured after 100 hours of operation under laboratory
conditions on reference equipment.
Unless otherwise indicated, the data relates to the horizontal burning position for T and TS types and to the
base up burning position for E types. If different burning
positions are used in actual practice there may be considerable changes in the lamp data, particularly with regard
to luminous flux, colour temperature and lamp life.
The luminous flux is virtually unaffected by the ambient
temperature outside the luminaire. At low ambient temperatures down to around – 50 °C special igniters are
needed.
Detailed information on heat accumulation tubes (luminaire simulators) for determining lamp data for HQI®-TS
and HCI®-TS is given in IEC 61167, clause 1.7.
Colour deviations:
With all metal halide lamps there may be differences in
colour from one lamp to the next due to external factors
such as mains voltage, type of control gear used, burning
position and luminaire design.
Lamp life
There are a confusing number of definitions for lamp life,
and these differ from one region to the next and from one
application to the next. The basic definitions for the most
common types are given below.
Minimum life:
Minimum period of time in which a lamp remains in operation under laboratory conditions.
This document refers explicitly only to the average life.
Economical life:
Average life:
Average number of hours burned over several groups in
which in the group in question half the lamps have failed
as the result of a defect (50% failure).
Period of time between group relamping of an installation
under the condition that operating costs are minimised
and the installation luminous flux does not fall below
a particular value. This will vary according to the application.
Survival rate:
Service life:
Quantity of working lamps of a group of lamps after a
defined number of burning hours.
Average value of some groups.
Simplified practical view of the economical life.
This is the operating time after which the installation
luminous flux (the product of the relative luminous flux
and the lamps still in operation) is still around 70%
(sometimes 80%).
Operating characteristics in relation to
the supply voltage
POWERSTAR HQI-T < 150 W
POWERSTAR, other versions
130
%
120
130
%
120
110
110
100
PL
UL
IL
Φ
UL
Φ
0
0
0
PL
0
95
100
105 % 110
Mains voltage
20
IL
90
90
90
100
Φ = Luminous flux
PL = Lamp wattage
IL = Lamp current
UL = Lamp voltage
90
95
100
105 % 110
Mains voltage
= Not permitted
Start-up behaviour (average value)
10
10
160
160
140
140
120
120
100
100
Rel. operating values
POWERSTAR HQI-T < 150 W
Rel. operating values
POWERSTAR HQI-T < 150 W with POWERTRONIC
0
60
40
20
0
1
IL
0
PL
60
UL
40
20
Φ
0
2
3 min 4
Start-up time
1
2
3 min 4
Start-up time
POWERSTAR HQI-TS 0 W…1000 W with CCG
POWERSTAR Neutral White 1000 W
and 2000 W with CCG
10
10
160
160
140
140
IL
100
100
Rel. operating values %
120
Rel. operating values %
120
0
60
PL
40
20
UL
0
Φ
1
2
3 min 4
Start-up time
IL
PL
UL
0
60
40
20
Φ
0
1
2
3 min 4
Start-up time
POWERSTAR Daylight 2000 W with CCG
10
160
IL
140
120
Rel. operating values %
100
PL
UL
0
60
40
Φ
20
0
1
2
3 min 4
Start-up time
21
Circuit diagrams
D
ZS
L
LH
UN
K
F
POWERTRONIC PTi
(all)
N
LL
LH
2
1
B
=6
A fuse, slow
acting
D = Choke
F = Protection on
demand
K = PF correction
capacitor
K+S= Time-limiting switch
and contactor
L = Lamp
L H = High-voltage
terminal
Mp = Neutral conductor
Sch = Switch
3
4
U N = 2
30 V ac
mains voltage
(for 2000 W =
400 V ac)
Z = Igniter to be
installed near the
lamp
ZL = HF igniter lead to
contact plate of
lamp
ZS = Symmetrical hot
restrike ignitor with
automatic ignition
5
For power supplies with a neutral conductor the choke
should be connected to the live conductor.
The right igniter for the particular lamp type must be
used to ensure reliable and safe ignition.
Chokes, holder, capacitors and igniters are available
from electrical suppliers.
Burning positions
s5
Permitted
Not permitted
Base
8.5
G22
IEC 004-5
22
LH
G 8.5
Spectral power distribution of discharge lamps
POWERSTAR ®
HQI® .../WDL
HQI® .../NDL
HQI® .../N
HQI® .../D
Visible range from 380 to 780 nm
Vertical scale
400 mW
1000 lm · 10 nm
23
www.osram.com
Global presence.
Support for around 150 countries.
• 78 companies and sales offices for 113 countries
• 37 countries served by local agents or OSRAM GmbH, Munich
Albania
Argentina
Australia
Austria
Azerbaijan
Belarus
Benelux
Bosnia-Herzegovina
Brazil
Bulgaria
Canada
Chile
China
Columbia
Croatia
Czech Republic
Denmark
Ecuador
Egypt
Estonia
Finland
France
Georgia
Great Britain
Greece
Hong Kong
Hungary
India
Indonesia
Iran
Italy
Japan
Kazakhstan
Kenya
OSRAM GmbH
Head Office
Hellabrunner Strasse 1
81543 Munich
Germany
Phone +49 (0) 89-6213-0
Fax +49 (0) 89-6213-20 20
www.osram.com
Korea
Latvia
Lithuania
Macedonia
Malaysia
Mexico
Moldavia
Norway
Pakistan
Peru
Philippines
Poland
Portugal
Rumania
Russia
Saudi Arabia
Serbia-Montenegro
Singapore
Slovakia
Slovenia
South Africa
Spain
Sweden
Switzerland
Taiwan
Thailand
Tunisia
Turkey
Ukraine
United Arab Emirates
USA
Uzbekistan
Venezuela
Vietnam
106T001GB 04/09 OSRAM CRM CC Subject to change without notice. Errors and omission excepted.
OSRAM associated companies and support centers.