SMDseries - Products of TDK

F E R R I T E S
March 2014
Mn-Zn
Ferrite Cores for Telecommunication
SMD series
EPC
ER
EE
EEM
(2/11)
F E R R I T E S
REMINDERS FOR USING THESE PRODUCTS
Please be sure to read this manual thoroughly before using the products.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment,
home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment,
industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality
require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person
or property.
When using the products for specific purposes, please first make confirmations in areas such as safety, reliability, and quality.
Please understand that we are not in a position to be held responsible for any damage or the like caused by any use exceeding the range
or conditions of this specification sheet or by any use in the specific applications.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When using this product in general-purpose standard applications, you are kindly requested to take into consideration securing protection
circuit/equipment or providing backup circuits, etc to ensure higher safety.
001-01 / 20140317 / ferrite_mz_tl_smd_en.fm
(3/11)
F E R R I T E S
Ferrite Cores for Telecommunication
Product compatible with RoHS directive
Halogen-free
Overview of the SMD Series
FEATURES
Small shapes for surface mounting.
The EPC, EE and EEM Cores are horizontal mounted types.
The ER Core is a vertical mounted type.
APPLICATION
Transformers and coils for small-sized communication devices
PART NUMBER CONSTRUCTION
H5C3
EPC10
Material
Size of E core
-
Z
AL-value
(Z: without air gap)
H5C3
EPC core
EPC10
EPC13
ER core
ER9.5/5
ER11/3.9
EE core
EE5
EE8.9/8
EEM core
EEM12.7/13.7
ER11/3.9
ER11/5
ER14.5/6
RANGE OF USE AND STORAGE TEMPERATURE
Temperature range
Operating
temperature
(°C)
–30 to +105
Storage
temperature
(°C)
–30 to +85
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
• All specifications are subject to change without notice.
001-01 / 20140317 / ferrite_mz_tl_smd_en.fm
(4/11)
F E R R I T E S
Mn-Zn SMD series Part No.: H5C3EPC10-Z
SHAPES AND DIMENSIONS
5.0±0.1
7.6min.
10.2±0.2
1.9±0.1
3.4±0.1
5.3min.
2.65±0.1
4.05±0.1
Dimensions in mm
Effective parameter
Core factor
Electrical
characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional
center pole area
Minimum crosssectional area
C1
(mm–1)
Effective
magnetic
path length
ℓe
(mm)
Weigh
AL-value
Acp min.
(mm2)
Cross-sectional
winding area
of core
Acw
(mm2)
Ve
(mm3)
Acp
(mm2)
(g/set)
(nH/N2)
10kHz
10mV
100Ts
1.89
17.8
9.39
167
8.73
8.13
7.69
1.1
2660 min.
• All specifications are subject to change without notice.
001-01 / 20140317 / ferrite_mz_tl_smd_en.fm
(5/11)
F E R R I T E S
Mn-Zn SMD series Part No.: H5C3EPC13-Z
SHAPES AND DIMENSIONS
5.6±0.15
10.5min.
13.2±0.25
2.05±0.1
4.6±0.15
8.3min.
4.5±0.2
6.6±0.2
Dimensions in mm
Effective parameter
Core factor
Electrical
characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional
center pole area
Minimum crosssectional area
C1
(mm–1)
Effective
magnetic
path length
ℓe
(mm)
Weigh
AL-value
Acp min.
(mm2)
Cross-sectional
winding area
of core
Acw
(mm2)
Ve
(mm3)
Acp
(mm2)
(g/set)
(nH/N2)
10kHz
10mV
100Ts
2.46
30.6
12.5
382
10.6
9.71
23.0
2.1
2450 min.
• All specifications are subject to change without notice.
001-01 / 20140317 / ferrite_mz_tl_smd_en.fm
(6/11)
F E R R I T E S
Mn-Zn SMD series Part No.: H5C3ER9.5/5-Z
9.35±0.15
3.4±0.1
7.63±0.13
7.0 min.
SHAPES AND DIMENSIONS
4.9±0.1
3.35±0.15
4.9±0.1
Dimensions in mm
Effective parameter
Core factor
Electrical
characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional
center pole area
Minimum crosssectional area
C1
(mm–1)
Effective
magnetic
path length
ℓe
(mm)
Weigh
AL-value
Acp min.
(mm2)
Cross-sectional
winding area
of core
Acw
(mm2)
Ve
(mm3)
Acp
(mm2)
(g/set)
(nH/N2)
10kHz
10mV
100Ts
1.67
14.2
8.47
120
9.08
8.55
7.1
0.6
3500 min.
• All specifications are subject to change without notice.
001-01 / 20140317 / ferrite_mz_tl_smd_en.fm
(7/11)
F E R R I T E S
Mn-Zn SMD series Part No.: H5C3ER11/3.9-Z
2.1±0.15
8.85±0.15
10.83±0.18
7.9 min.
4.13±0.13
SHAPES AND DIMENSIONS
5.9±0.1
3.85±0.1
Dimensions in mm
Effective parameter
Core factor
Electrical
characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional
center pole area
Minimum crosssectional area
C1
(mm–1)
Effective
magnetic
path length
ℓe
(mm)
Weigh
AL-value
Acp min.
(mm2)
Cross-sectional
winding area
of core
Acw
(mm2)
Ve
(mm3)
Acp
(mm2)
(g/set)
(nH/N2)
10kHz
10mV
100Ts
1.08
12.6
11.7
147
13.4
12.6
4.96
0.8
4900 min.
• All specifications are subject to change without notice.
001-01 / 20140317 / ferrite_mz_tl_smd_en.fm
(8/11)
F E R R I T E S
Mn-Zn SMD series Part No.: H5C3ER11/5-Z
3.15±0.15
8.85±0.15
10.83±0.18
7.9 min.
4.13±0.13
SHAPES AND DIMENSIONS
5.9±0.1
4.9±0.1
Dimensions in mm
Effective parameter
Core factor
Electrical
characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional
center pole area
Minimum crosssectional area
C1
(mm–1)
Effective
magnetic
path length
ℓe
(mm)
Weigh
AL-value
Acp min.
(mm2)
Cross-sectional
winding area
of core
Acw
(mm2)
Ve
(mm3)
Acp
(mm2)
(g/set)
(nH/N2)
10kHz
10mV
100Ts
1.23
14.7
11.9
174
13.4
12.6
7.44
1.0
4760 min.
• All specifications are subject to change without notice.
001-01 / 20140317 / ferrite_mz_tl_smd_en.fm
(9/11)
F E R R I T E S
Mn-Zn SMD series Part No.: H5C3ER14.5/6-Z
14.5±0.2
4.7±0.1
3.3±0.2
11.8±0.2
SHAPES AND DIMENSIONS
6.7±0.1
5.9±0.1
Dimensions in mm
Effective parameter
Core factor
Electrical
characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional
center pole area
Minimum crosssectional area
C1
(mm–1)
Effective
magnetic
path length
ℓe
(mm)
Weigh
AL-value
Acp min.
(mm2)
Cross-sectional
winding area
of core
Acw
(mm2)
Ve
(mm3)
Acp
(mm2)
(g/set)
(nH/N2)
10kHz
10mV
100Ts
1.08
19.0
17.6
333
17.3
16.6
11.7
1.8
5950 min.
• All specifications are subject to change without notice.
001-01 / 20140317 / ferrite_mz_tl_smd_en.fm
(10/11)
F E R R I T E S
Mn-Zn SMD series Part No.: H5C3EE8.9/8-Z
SHAPES AND DIMENSIONS
1.9±0.12
5.08min.
1.91±0.2
1.91±0.2
8.86±0.35
1.9±0.12
4-C1.1
4.5±0.3
8.12±0.3
Dimensions in mm
Effective parameter
Core factor
Electrical
characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional
center pole area
Minimum crosssectional area
C1
(mm–1)
Effective
magnetic
path length
ℓe
(mm)
Weigh
AL-value
Acp min.
(mm2)
Cross-sectional
winding area
of core
Acw
(mm2)
Ve
(mm3)
Acp
(mm2)
(g/set)
(nH/N2)
10kHz
10mV
100Ts
3.15
15.6
4.96
77.4
3.61
3.17
7.07
0.6
2000 min.
• All specifications are subject to change without notice.
001-01 / 20140317 / ferrite_mz_tl_smd_en.fm
(11/11)
F E R R I T E S
Mn-Zn SMD series Part No.: H5C3EEM12.7/13.7-Z
3.3±0.15
12.75±0.25
6.0±0.1
1.85±0.1
1.7±0.1
9.1±0.3
13.7±0.3
0.9 min.
1.7±0.1
SHAPES AND DIMENSIONS
Dimensions in mm
Effective parameter
Core factor
Electrical
characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional
center pole area
Minimum crosssectional area
C1
(mm–1)
Effective
magnetic
path length
ℓe
(mm)
Weigh
AL-value
Acp min.
(mm2)
Cross-sectional
winding area
of core
Acw
(mm2)
Ve
(mm3)
Acp
(mm2)
(g/set)
(nH/N2)
10kHz
10mV
100Ts
2.27
27.3
12.0
328
11.1
10.3
15.2
1.9
3000 min.
• All specifications are subject to change without notice.
001-01 / 20140317 / ferrite_mz_tl_smd_en.fm