F E R R I T E S March 2014 Mn-Zn Ferrite Core for Telecommunication P series (2/21) F E R R I T E S REMINDERS FOR USING THESE PRODUCTS Please be sure to read this manual thoroughly before using the products. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. When using the products for specific purposes, please first make confirmations in areas such as safety, reliability, and quality. Please understand that we are not in a position to be held responsible for any damage or the like caused by any use exceeding the range or conditions of this specification sheet or by any use in the specific applications. (1) Aerospace/Aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When using this product in general-purpose standard applications, you are kindly requested to take into consideration securing protection circuit/equipment or providing backup circuits, etc to ensure higher safety. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (3/21) F E R R I T E S Ferrite Cores for Telecommunication Product compatible with RoHS directive Halogen-free Overview of the P Series FEATURES The pot cores have a good self-shielding property. The shape gives a high inductance value to each occupied space. APPLICATION Various transformers, coils, proximity sensors PART NUMBER CONSTRUCTION H5A P5.8/3.3 Z Material Size of P core AL-value (Z: without air gap) H5A H5C2 P5.8/3.3 P7/4 P9/5 P11/7 P14/8 P18/11 P22/13 P26/16 P30/19 - 5 2 S Type of Pot core Number of lead slot Shape of lead slot RANGE OF USE AND STORAGE TEMPERATURE Temperature range Operating temperature （°C） –30 to +105 Storage temperature （°C） –30 to +85 RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (4/21) F E R R I T E S Mn-Zn P series Part No.: H5AP5.8/3.3Z-52S +0 2.5 – 0.1 +0.1 +0 5.8 – 0.15 4.5 – 0 1.4 – 0 90° SHAPES AND DIMENSIONS +0.2 2.2 – 0 +0.1 +0 3.3 – 0.1 0.95 –0 Dimensions in mm Base on IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 Electrical characteristics Effective cross-sectional area Effective core volume Cross-sectional Minimum crosscenter pole area sectional area Acp Ae ℓe Acp min. Cross-sectional winding area of core Weigh AL-value Effective permeability Acw Ve (mm–1) (mm) (mm2) (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 1.68 7.9 4.7 37 4.08 3.66 2.42 0.2 870±25% （Pe） 1163 Measuring conditions Coil：ø0.08mm, 2UEW, 100Ts, 70Ts (for material H5C2) Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (5/21) F E R R I T E S Mn-Zn P series Part No.: H5C2P5.8/3.3Z-52S +0 2.5 – 0.1 +0.1 +0 5.8 – 0.15 4.5 – 0 1.4 – 0 90° SHAPES AND DIMENSIONS +0.2 2.2 – 0 +0.1 +0 3.3 – 0.1 0.95 –0 Dimensions in mm Base on IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 Electrical characteristics Effective cross-sectional area Effective core volume Cross-sectional Minimum crosscenter pole area sectional area Acp Ae ℓe Cross-sectional winding area of core Acp min. Acw Weigh AL-value Effective permeability Ve (mm–1) (mm) (mm2) (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 1.68 7.9 4.7 37 4.08 3.66 2.42 0.2 2660 min. （Pe） 3556 Measuring conditions Coil：ø0.08mm, 2UEW, 100Ts, 70Ts (for material H5C2) Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (6/21) F E R R I T E S Mn-Zn P series Part No.: H5AP7/4Z-52S +0 +0 3.0 – 0.1 7.35 – 0.2 +0.15 5.8 – 0 1.6 – 0 90° SHAPES AND DIMENSIONS +0.2 2.8 – 0 +0.1 +0 4.2 – 0.1 1.05 –0 Dimensions in mm Base on IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 Electrical characteristics Effective cross-sectional area Effective core volume Cross-sectional Minimum crosscenter pole area sectional area Acp Ae ℓe Cross-sectional winding area of core Acp min. Acw Weigh AL-value Effective permeability Ve (mm–1) (mm) (mm2) (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 1.43 10 7.0 70 6.05 5.57 4.31 0.5 1200±25% （Pe） 1366 Measuring conditions Coil：ø0.1mm, 2UEW, 100Ts Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (7/21) F E R R I T E S Mn-Zn P series Part No.: H5C2P7/4Z-52S +0 +0 3.0 – 0.1 7.35 – 0.2 +0.15 5.8 – 0 1.6 – 0 90° SHAPES AND DIMENSIONS +0.2 2.8 – 0 +0.1 +0 4.2 – 0.1 1.05 –0 Dimensions in mm Base on IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 Electrical characteristics Effective cross-sectional area Effective core volume Cross-sectional Minimum crosscenter pole area sectional area Acp Ae ℓe Cross-sectional winding area of core Acp min. Acw Weigh AL-value Effective permeability Ve (mm–1) (mm) (mm2) (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 1.43 10 7.0 70 6.05 5.57 4.31 0.5 4970±30% （Pe） 5656 Measuring conditions Coil：ø0.1mm, 2UEW, 70Ts Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (8/21) F E R R I T E S Mn-Zn P series Part No.: H5AP9/5Z-52H +0 9.3 – 0.3 +0 +0.25 7.5 – 0 1.8 – 0 3.9 – 0.2 SHAPES AND DIMENSIONS +0.1 +0.15 2.0 – 0 1.8 – 0 +0 2.7 – 0.1 6.5±0.25 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 Electrical characteristics Effective cross-sectional area Effective core volume Cross-sectional Minimum crosscenter pole area sectional area Acp Ae ℓe Cross-sectional winding area of core Acp min. Acw Weigh AL-value Effective permeability Ve (mm–1) (mm) (mm2) (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 1.24 12.4 10.0 124 8.04 7.29 7.17 0.8 1570±25% （Pe） 1562 Measuring conditions Coil：ø0.1mm, 2UEW, 100Ts Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (9/21) F E R R I T E S Mn-Zn P series Part No.: H5C2P9/5Z-52H +0 9.3 – 0.3 +0 +0.25 7.5 – 0 1.8 – 0 3.9 – 0.2 SHAPES AND DIMENSIONS +0.1 +0.15 2.0 – 0 1.8 – 0 +0 2.7 – 0.1 6.5±0.25 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 Electrical characteristics Effective cross-sectional area Effective core volume Cross-sectional Minimum crosscenter pole area sectional area Acp Ae ℓe Cross-sectional winding area of core Acp min. Acw Weigh AL-value Effective permeability Ve (mm–1) (mm) (mm2) (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 1.24 12.4 10.0 124 8.04 7.29 7.17 0.8 6030±30% （Pe） 5998 Measuring conditions Coil：ø0.1mm, 2UEW, 70Ts Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (10/21) F E R R I T E S Mn-Zn P series Part No.: H5AP11/7Z-52H +0 11.3 – 0.4 +0 +0.4 9.0 – 0 2.0 – 0 4.7 – 0.2 SHAPES AND DIMENSIONS +0.1 +0.15 2.0 – 0 2.2 – 0 +0 3.3 – 0.1 6.8±0.25 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 Electrical characteristics Effective cross-sectional area Effective core volume Cross-sectional Minimum crosscenter pole area sectional area Acp Ae ℓe Cross-sectional winding area of core Acp min. Acw Weigh AL-value Effective permeability Ve (mm–1) (mm) (mm2) (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 0.969 15.5 16.0 248 13.3 12.4 10.5 1.8 2320±25% （Pe） 1765 Measuring conditions Coil：ø0.18mm, 2UEW, 100Ts, Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (11/21) F E R R I T E S Mn-Zn P series Part No.: H5C2P11/7Z-52H +0 11.3 – 0.4 +0 +0.4 9.0 – 0 2.0 – 0 4.7 – 0.2 SHAPES AND DIMENSIONS +0.1 +0.15 2.0 – 0 2.2 – 0 +0 3.3 – 0.1 6.8±0.25 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 Electrical characteristics Effective cross-sectional area Effective core volume Cross-sectional Minimum crosscenter pole area sectional area Acp Ae ℓe Cross-sectional winding area of core Acp min. Acw Weigh AL-value Effective permeability Ve (mm–1) (mm) (mm2) (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 0.969 15.5 16.0 248 13.3 12.4 10.5 1.8 8220±30% （Pe） 6253 Measuring conditions Coil：ø0.18mm, 2UEW, 70Ts Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (12/21) F E R R I T E S Mn-Zn P series Part No.: H5AP14/8Z-52B +0.4 +0 14.2 – 0.4 +0 11.6 – 0 2.5 – 0 6.0 – 0.2 SHAPES AND DIMENSIONS +0.1 +0.4 3.0 – 0 5.6 – 0 +0 9.8 – 0.5 0.3 +0 8.5 – 0.3 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 Electrical characteristics Effective cross-sectional area Effective core volume Cross-sectional Minimum crosscenter pole area sectional area Acp Ae ℓe Cross-sectional winding area of core Acp min. Acw Weigh AL-value Effective permeability Ve (mm–1) (mm) (mm2) (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 0.789 19.8 25.1 497 19.8 18.4 17.1 3.2 3000±25% （Pe） 1884 Measuring conditions Coil：ø0.18mm, 2UEW, 100Ts Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (13/21) F E R R I T E S Mn-Zn P series Part No.: H5C2P14/8Z-52B +0.4 +0 14.2 – 0.4 +0 11.6 – 0 2.5 – 0 6.0 – 0.2 SHAPES AND DIMENSIONS +0.1 +0.4 3.0 – 0 5.6 – 0 +0 9.8 – 0.5 0.3 +0 8.5 – 0.3 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 Electrical characteristics Effective cross-sectional area Effective core volume Cross-sectional Minimum crosscenter pole area sectional area Acp Ae ℓe Cross-sectional winding area of core Acp min. Acw Weigh AL-value Effective permeability Ve (mm–1) (mm) (mm2) (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 0.789 19.8 25.1 497 19.8 18.4 17.1 3.2 11500±30% （Pe） 7221 Measuring conditions Coil：ø0.18mm, 2UEW, 100Ts Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (14/21) F E R R I T E S Mn-Zn P series Part No.: H5AP18/11Z-52B +0 18.2 – 0.6 +0.4 15.0 – 0 +0 3.0 – 0 7.6 – 0.25 SHAPES AND DIMENSIONS +0.1 +0.4 3.0 – 0 7.3 – 0 +0 0.4 +0 13.1 – 0.5 10.6 – 0.2 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 Electrical characteristics Effective cross-sectional area Effective core volume Cross-sectional Minimum crosscenter pole area sectional area Acp Ae ℓe Acp min. Cross-sectional winding area of core Weigh AL-value Effective permeability Acw Ve (mm–1) (mm) (mm2) (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 0.596 25.8 43.3 1117 36.3 34.4 29 6.7 4500±25% （Pe） 2138 Measuring conditions Coil：ø0.30mm, 2UEW, 100Ts Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (15/21) F E R R I T E S Mn-Zn P series Part No.: H5C2P18/11Z-52B +0 18.2 – 0.6 +0.4 15.0 – 0 +0 3.0 – 0 7.6 – 0.25 SHAPES AND DIMENSIONS +0.1 +0.4 3.0 – 0 7.3 – 0 +0 0.4 +0 13.1 – 0.5 10.6 – 0.2 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 Electrical characteristics Effective cross-sectional area 0.596 Cross-sectional Minimum crosscenter pole area sectional area Acp Ae ℓe (mm–1) Effective core volume (mm) 25.8 Cross-sectional winding area of core Acp min. Acw (mm2) (mm2) Weigh AL-value (g/set) (nH/N2) 6.7 4500±25% 16000±30% Effective permeability Ve (mm2) 43.3 (mm3) 1117 (mm2) 36.3 34.4 29 （Pe） 2138 7601 Measuring conditions Coil：ø0.30mm, 2UEW, 100Ts Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (16/21) F E R R I T E S Mn-Zn P series Part No.: H5AP22/13Z-52H +0.3 4.4 – 0 21.6±0.4 +0.6 17.9 – 0 +0 3.0 – 0 9.4 – 0.3 SHAPES AND DIMENSIONS +0.4 9.2 – 0 +0 +0 14.5 –1.0 13.6 – 0.4 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 (mm–1) ℓe (mm) 0.497 31.5 Electrical characteristics Effective cross-sectional area Ae Effective core volume Cross-sectional center pole area Acp Minimum crosssectional area Weigh AL-value Acp min. Cross-sectional winding area of core Acw (mm2) Ve (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 63.4 1997 51.6 47.7 42.1 12.7 5900±25% Effective permeability （Pe） 2333 Measuring conditions Coil：ø0.35mm, 2UEW, 100Ts Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (17/21) F E R R I T E S Mn-Zn P series Part No.: H5C2P22/13Z-52H +0.3 4.4 – 0 21.6±0.4 +0.6 17.9 – 0 +0 3.0 – 0 9.4 – 0.3 SHAPES AND DIMENSIONS +0.4 9.2 – 0 +0 +0 14.5 –1.0 13.6 – 0.4 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 (mm–1) 0.497 ℓe (mm) 31.5 Electrical characteristics Effective cross-sectional area Ae (mm2) 63.4 Effective core volume Ve (mm3) 1997 Cross-sectional center pole area Acp (mm2) 51.6 Minimum crosssectional area Weigh AL-value Acp min. Cross-sectional winding area of core Acw (mm2) (mm2) (g/set) (nH/N2) 12.7 19500±30% 7700[at 21.7mT] 16000+40/–30% 6318[at 0.5mT] 47.7 42.1 Effective permeability （Pe） Measuring conditions Coil：ø0.35mm, 2UEW, 100Ts Frequency：1kHz Current level： 0.5mA Reference specification when 0.5mT is applied to cores. • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (18/21) F E R R I T E S Mn-Zn P series Part No.: H5AP26/16Z-52H +0.3 5.4 – 0 +0 25.5±0.5 +0.8 21.2 – 0 +0 4.0 – 0 11.5 – 0.4 SHAPES AND DIMENSIONS +0.4 11.0 – 0 +0 17.7 –1.0 16.3 – 0.4 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 (mm–1) ℓe (mm) 0.40 37.6 Electrical characteristics Effective cross-sectional area Ae Effective core volume Cross-sectional center pole area Acp Minimum crosssectional area Weigh AL-value Acp min. Cross-sectional winding area of core Acw (mm2) Ve (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 94 3534 76.1 71.3 57.7 21.1 7800±25% Effective permeability （Pe） 2483 Measuring conditions Coil：ø0.40mm, 2UEW, 100Ts Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (19/21) F E R R I T E S Mn-Zn P series Part No.: H5C2P26/16Z-52H +0.3 5.4 – 0 +0 25.5±0.5 +0.8 21.2 – 0 +0 4.0 – 0 11.5 – 0.4 SHAPES AND DIMENSIONS +0.4 11.0 – 0 +0 17.7 –1.0 16.3 – 0.4 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 (mm–1) 0.40 ℓe (mm) 37.6 Electrical characteristics Effective cross-sectional area Ae (mm2) 94 Effective core volume Ve (mm3) 3534 Cross-sectional center pole area Acp (mm2) 76.1 Minimum crosssectional area Weigh AL-value Acp min. Cross-sectional winding area of core Acw (mm2) (mm2) (g/set) (nH/N2) 21.1 24500±30% 7800[at 18.4mT] 20000+40/–30% 6367[at 0.5mT] 71.3 57.7 Effective permeability （Pe） Measuring conditions Coil：ø0.40mm, 2UEW, 100Ts Frequency：1kHz Current level： 0.5mA Reference specification when 0.5mT is applied to cores. • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (20/21) F E R R I T E S Mn-Zn P series Part No.: H5AP30/19Z-52H +0.3 5.4 – 0 30.0±0.5 +0.8 25.0 – 0 +0 4.0 – 0 13.5 – 0.4 SHAPES AND DIMENSIONS +0.4 13.0 – 0 +0 19.0 – 0.4 +0 21.5 –1.0 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 (mm–1) ℓe (mm) 0.33 45.2 Electrical characteristics Effective cross-sectional area Ae Effective core volume Cross-sectional center pole area Acp Minimum crosssectional area Weigh AL-value Acp min. Cross-sectional winding area of core Acw (mm2) Ve (mm3) (mm2) (mm2) (mm2) (g/set) (nH/N2) 137 6192 115 109 79.9 35.3 9800±25% Effective permeability （Pe） 2573 Measuring conditions Coil：ø0.40mm, 2UEW, 100Ts Frequency：1kHz Current level： 0.5mA • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm (21/21) F E R R I T E S Mn-Zn P series Part No.: H5C2P30/19Z-52H +0.3 5.4 – 0 30.0±0.5 +0.8 25.0 – 0 +0 4.0 – 0 13.5 – 0.4 SHAPES AND DIMENSIONS +0.4 13.0 – 0 +0 19.0 – 0.4 +0 21.5 –1.0 Dimensions in mm Base on JIS C2516, IEC Publication 62317-2. Effective parameter Core factor Effective magnetic path length C1 (mm–1) 0.33 ℓe (mm) 45.2 Electrical characteristics Effective Effective cross-sectional core volume area Ae Ve (mm2) (mm3) 137 6192 Cross-sectional Minimum crosscenter pole area sectional area Acp Acp min. Cross-sectional Weigh winding area of core Acw AL-value (mm2) (mm2) (g/set) (nH/N2) 35.3 32000±30% 8400[at 16.5mT] 25000+40/–30% 6563[at 0.5mT] 115 (mm2) 109 79.9 Effective permeability （Pe） Measuring conditions Coil：ø0.40mm, 2UEW, 100Ts Frequency：1kHz Current level： 0.5mA Reference specification when 0.5mT is applied to cores. • All specifications are subject to change without notice. 001-01 / 20140319 / ferrite_mz_tl_p_en.fm