I N D U C T O R S January 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLG-P Series (For automobiles) MLG0603P Type MLG0603P 0603 [0201 inch]* * Dimensions Code JIS[EIA] (2/16) I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (3/16) I N D U C T O R S Inductors for High Frequency Circuits Product compatible with RoHS directive Halogen-free Compatible with lead-free solders AEC-Q200 Multilayer Ceramic Overview of MLG0603P Type FEATURES High Q type inductor for high-frequency circuits. Inductance range: from 0.6 to 120nH. 0.1n step inductance lineup. Compared with existing products, the size was greatly reduced, making it optimal for fine-pitch circuits. Optimal configuration that greatly improves the Q to 800MHz or higher. Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for Highfrequency. APPLICATION Automotive equipment, smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners and other high frequency circuits for the mobile communication industry PART NUMBER CONSTRUCTION MLG Series name 0603 L×W×H Dimensions (mm) 0603 0.6×0.3×0.3 P Characteristics P 0N6 B Inductance (μH) 1N1 1.1 11N 11 Inductance tolerance B ±0.1nH C ±0.2nH S ±0.3nH H ±3% J ±5% T D25 Packaging style Internal code T Taping OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Temperature range Package quantity Operating Storage Type temperature temperature (pieces/reel) （°C） （°C） MLG0603P –55 to +125 –55 to +125 15000 The Storage temperature range is for after the circuit board is mounted. Individual weight （mg） 0.2 RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (4/16) I N D U C T O R S MLG0603P Type RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Peak T: Temperature T4 T3 T2 T3 t3 T1 t1 t2 t: Time Preheating Temp. T1 T2 150°C 180°C Time t1 60 to 120s Soldering Temp. Time T3 t2 230°C 30 to 60s Peak Temp. T4 250 to 260°C Time t3 10s max. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (5/16) I N D U C T O R S MLG0603P Type 0.30±0.03 SHAPE & DIMENSIONS 0.09±0.04 0.09±0.04 0.30±0.03 0.60±0.03 0.15±0.05 0.15±0.05 Dimensions in mm 0.3 RECOMMENDED LAND PATTERN 0.25 0.3 0.25 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (6/16) I N D U C T O R S MLG0603P Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 0.6 0.6 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.4 1.5 1.5 1.5 1.6 1.6 1.6 1.7 1.7 1.7 1.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 2.1 2.1 2.1 2.2 2.2 Tolerance ±0.1nH ±0.2nH ±0.1nH ±0.2nH ±0.1nH ±0.2nH ±0.1nH ±0.2nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH Q L, Q measuring frequency Self-resonant frequency DC resistance Rated current Part No. min. — — — — — — — — 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 (GHz)min. 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 9.0 9.0 9.0 9.0 9.0 9.0 8.5 8.5 8.5 8.0 8.0 8.0 7.5 7.5 (: )max. 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.07 0.07 0.07 0.07 0.07 0.07 0.08 0.08 0.08 0.08 0.08 0.08 0.09 0.09 0.09 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 (mA)max. 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 800 800 800 800 800 800 800 800 800 800 800 800 700 700 700 700 700 700 700 700 700 600 600 600 600 600 600 600 600 600 600 600 MLG0603P0N6BTD25 MLG0603P0N6CTD25 MLG0603P0N7BTD25 MLG0603P0N7CTD25 MLG0603P0N8BTD25 MLG0603P0N8CTD25 MLG0603P0N9BTD25 MLG0603P0N9CTD25 MLG0603P1N0BTD25 MLG0603P1N0CTD25 MLG0603P1N0STD25 MLG0603P1N1BTD25 MLG0603P1N1CTD25 MLG0603P1N1STD25 MLG0603P1N2BTD25 MLG0603P1N2CTD25 MLG0603P1N2STD25 MLG0603P1N3BTD25 MLG0603P1N3CTD25 MLG0603P1N3STD25 MLG0603P1N4BTD25 MLG0603P1N4CTD25 MLG0603P1N4STD25 MLG0603P1N5BTD25 MLG0603P1N5CTD25 MLG0603P1N5STD25 MLG0603P1N6BTD25 MLG0603P1N6CTD25 MLG0603P1N6STD25 MLG0603P1N7BTD25 MLG0603P1N7CTD25 MLG0603P1N7STD25 MLG0603P1N8BTD25 MLG0603P1N8CTD25 MLG0603P1N8STD25 MLG0603P1N9BTD25 MLG0603P1N9CTD25 MLG0603P1N9STD25 MLG0603P2N0BTD25 MLG0603P2N0CTD25 MLG0603P2N0STD25 MLG0603P2N1BTD25 MLG0603P2N1CTD25 MLG0603P2N1STD25 MLG0603P2N2BTD25 MLG0603P2N2CTD25 (GHz)typ. 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 19.9 19.9 19.9 16.0 16.0 16.0 13.9 13.9 13.9 11.7 11.7 11.7 14.9 14.9 14.9 13.4 13.4 13.4 12.8 12.8 12.8 10.7 10.7 10.7 10.9 10.9 10.9 10.1 10.1 10.1 9.8 9.8 9.8 9.0 9.0 (: )typ. 0.01 0.01 0.01 0.01 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.03 0.03 0.03 0.04 0.04 0.04 0.03 0.03 0.03 0.04 0.04 0.04 0.03 0.03 0.03 0.03 0.03 0.03 0.02 0.02 0.02 0.03 0.03 0.03 0.04 0.04 0.04 0.03 0.03 0.03 0.05 0.05 0.05 0.07 0.07 Please contact us for information on inductance tolerance, G (±2%). ・Short bar residual inductance =0.43nH ○ Measurement equipment Measurement item Product No. L, Q 4291B+16197A Self-resonant frequency 8720C DC resistance Type-7561 ＊ Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Agilent Technologies Yokogawa Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (7/16) I N D U C T O R S MLG0603P Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 2.2 2.3 2.3 2.3 2.4 2.4 2.4 2.5 2.5 2.5 2.6 2.6 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.9 2.9 2.9 3.0 3.0 3.0 3.1 3.1 3.1 3.2 3.2 3.2 3.3 3.3 3.3 3.4 3.4 3.4 3.5 3.5 3.5 3.6 3.6 3.6 3.7 3.7 3.7 Tolerance ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH Q L, Q measuring frequency Self-resonant frequency DC resistance Rated current Part No. min. 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 (GHz)min. 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.0 7.0 7.0 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 (: )max. 0.10 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 (mA)max. 600 600 600 600 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 400 400 400 400 400 400 MLG0603P2N2STD25 MLG0603P2N3BTD25 MLG0603P2N3CTD25 MLG0603P2N3STD25 MLG0603P2N4BTD25 MLG0603P2N4CTD25 MLG0603P2N4STD25 MLG0603P2N5BTD25 MLG0603P2N5CTD25 MLG0603P2N5STD25 MLG0603P2N6BTD25 MLG0603P2N6CTD25 MLG0603P2N6STD25 MLG0603P2N7BTD25 MLG0603P2N7CTD25 MLG0603P2N7STD25 MLG0603P2N8BTD25 MLG0603P2N8CTD25 MLG0603P2N8STD25 MLG0603P2N9BTD25 MLG0603P2N9CTD25 MLG0603P2N9STD25 MLG0603P3N0BTD25 MLG0603P3N0CTD25 MLG0603P3N0STD25 MLG0603P3N1BTD25 MLG0603P3N1CTD25 MLG0603P3N1STD25 MLG0603P3N2BTD25 MLG0603P3N2CTD25 MLG0603P3N2STD25 MLG0603P3N3BTD25 MLG0603P3N3CTD25 MLG0603P3N3STD25 MLG0603P3N4BTD25 MLG0603P3N4CTD25 MLG0603P3N4STD25 MLG0603P3N5BTD25 MLG0603P3N5CTD25 MLG0603P3N5STD25 MLG0603P3N6BTD25 MLG0603P3N6CTD25 MLG0603P3N6STD25 MLG0603P3N7BTD25 MLG0603P3N7CTD25 MLG0603P3N7STD25 (GHz)typ. 9.0 8.4 8.4 8.4 10.9 10.9 10.9 9.9 9.9 9.9 10.1 10.1 10.1 10.0 10.0 10.0 9.9 9.9 9.9 9.2 9.2 9.2 9.1 9.1 9.1 8.8 8.8 8.8 8.4 8.4 8.4 8.4 8.4 8.4 8.1 8.1 8.1 8.0 8.0 8.0 7.7 7.7 7.7 7.4 7.4 7.4 (: )typ. 0.07 0.07 0.07 0.07 0.12 0.12 0.12 0.09 0.09 0.09 0.14 0.14 0.14 0.14 0.14 0.14 0.10 0.10 0.10 0.10 0.10 0.10 0.14 0.14 0.14 0.10 0.10 0.10 0.14 0.14 0.14 0.13 0.13 0.13 0.13 0.13 0.13 0.12 0.12 0.12 0.10 0.10 0.10 0.14 0.14 0.14 Please contact us for information on inductance tolerance, G (±2%). ・Short bar residual inductance =0.43nH ○ Measurement equipment Measurement item Product No. L, Q 4291B+16197A Self-resonant frequency 8720C DC resistance Type-7561 ＊ Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Agilent Technologies Yokogawa Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (8/16) I N D U C T O R S MLG0603P Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 3.8 3.8 3.8 3.9 3.9 3.9 4.0 4.0 4.0 4.1 4.1 4.1 4.2 4.2 4.2 4.3 4.3 4.7 4.7 5.1 5.1 5.6 5.6 6.2 6.2 6.8 6.8 7.5 7.5 8.2 8.2 9.1 9.1 10.0 10.0 11.0 11.0 12.0 12.0 13.0 13.0 15.0 15.0 16.0 16.0 18.0 Tolerance ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.3nH ±5% ±0.3nH ±5% ±0.3nH ±5% ±0.3nH ±5% ±0.3nH ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% Q L, Q measuring frequency Self-resonant frequency DC resistance Rated current Part No. min. 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 (GHz)min. 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.5 5.5 5.5 5.5 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.5 3.5 3.5 3.5 3.2 3.2 3.2 3.2 3.0 3.0 3.0 (: )max. 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.70 0.70 0.75 0.75 0.80 0.80 0.85 0.85 0.90 0.90 0.95 0.95 1.00 1.00 1.10 1.10 1.10 1.10 1.20 1.20 1.20 1.20 1.40 (mA)max. 400 400 400 400 400 400 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 300 300 300 300 300 300 250 250 250 250 250 250 250 250 250 250 250 250 250 250 200 200 200 MLG0603P3N8BTD25 MLG0603P3N8CTD25 MLG0603P3N8STD25 MLG0603P3N9BTD25 MLG0603P3N9CTD25 MLG0603P3N9STD25 MLG0603P4N0BTD25 MLG0603P4N0CTD25 MLG0603P4N0STD25 MLG0603P4N1BTD25 MLG0603P4N1CTD25 MLG0603P4N1STD25 MLG0603P4N2BTD25 MLG0603P4N2CTD25 MLG0603P4N2STD25 MLG0603P4N3STD25 MLG0603P4N3JTD25 MLG0603P4N7STD25 MLG0603P4N7JTD25 MLG0603P5N1STD25 MLG0603P5N1JTD25 MLG0603P5N6STD25 MLG0603P5N6JTD25 MLG0603P6N2STD25 MLG0603P6N2JTD25 MLG0603P6N8HTD25 MLG0603P6N8JTD25 MLG0603P7N5HTD25 MLG0603P7N5JTD25 MLG0603P8N2HTD25 MLG0603P8N2JTD25 MLG0603P9N1HTD25 MLG0603P9N1JTD25 MLG0603P10NHTD25 MLG0603P10NJTD25 MLG0603P11NHTD25 MLG0603P11NJTD25 MLG0603P12NHTD25 MLG0603P12NJTD25 MLG0603P13NHTD25 MLG0603P13NJTD25 MLG0603P15NHTD25 MLG0603P15NJTD25 MLG0603P16NHTD25 MLG0603P16NJTD25 MLG0603P18NHTD25 (GHz)typ. 7.0 7.0 7.0 7.1 7.1 7.1 6.7 6.7 6.7 6.7 6.7 6.7 6.6 6.6 6.6 6.7 6.7 6.9 6.9 6.6 6.6 5.3 5.3 6.3 6.3 6.1 6.1 5.4 5.4 5.2 5.2 5.0 5.0 4.7 4.7 4.5 4.5 4.3 4.3 4.2 4.2 3.7 3.7 3.6 3.6 3.5 (: )typ. 0.24 0.24 0.24 0.22 0.22 0.22 0.21 0.21 0.21 0.29 0.29 0.29 0.24 0.24 0.24 0.24 0.24 0.16 0.16 0.30 0.30 0.32 0.32 0.59 0.59 0.62 0.62 0.70 0.70 0.71 0.71 0.76 0.76 0.85 0.85 0.64 0.64 0.82 0.82 0.87 0.87 0.94 0.94 1.00 1.00 1.04 Please contact us for information on inductance tolerance, G (±2%). ・Short bar residual inductance =0.43nH ○ Measurement equipment Measurement item Product No. L, Q 4291B+16197A Self-resonant frequency 8720C DC resistance Type-7561 ＊ Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Agilent Technologies Yokogawa Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (9/16) I N D U C T O R S MLG0603P Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 18.0 20.0 20.0 22.0 22.0 24.0 24.0 27.0 27.0 30.0 30.0 33.0 33.0 36.0 36.0 39.0 39.0 43.0 43.0 47.0 47.0 51.0 51.0 56.0 56.0 62.0 62.0 68.0 68.0 75.0 75.0 82.0 82.0 91.0 91.0 100.0 100.0 110.0 110.0 120.0 120.0 Tolerance ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% Q L, Q measuring frequency Self-resonant frequency DC resistance Rated current Part No. min. 14 14 14 14 14 14 14 14 14 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 9 9 9 9 9 9 9 9 9 9 9 9 9 9 (MHz) 500 500 500 500 500 500 500 500 500 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 (GHz)min. 3.0 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.6 1.6 1.6 1.6 1.4 1.4 1.4 1.4 1.2 1.2 1.2 1.2 1.0 1.0 1.0 1.0 0.9 0.9 0.9 0.9 0.8 0.8 0.8 0.8 (: )max. 1.40 1.90 1.90 1.90 1.90 2.10 2.10 2.10 2.10 2.20 2.20 2.20 2.20 2.40 2.40 2.40 2.40 2.90 2.90 2.90 2.90 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 4.00 4.00 4.00 4.00 4.50 4.50 4.50 4.50 5.00 5.00 5.00 5.00 (mA)max. 200 150 150 150 150 140 140 140 140 130 130 130 130 120 120 120 120 110 110 110 110 100 100 100 100 100 100 100 100 80 80 80 80 80 80 80 80 80 80 80 80 MLG0603P18NJTD25 MLG0603P20NHTD25 MLG0603P20NJTD25 MLG0603P22NHTD25 MLG0603P22NJTD25 MLG0603P24NHTD25 MLG0603P24NJTD25 MLG0603P27NHTD25 MLG0603P27NJTD25 MLG0603P30NHTD25 MLG0603P30NJTD25 MLG0603P33NHTD25 MLG0603P33NJTD25 MLG0603P36NHTD25 MLG0603P36NJTD25 MLG0603P39NHTD25 MLG0603P39NJTD25 MLG0603P43NHTD25 MLG0603P43NJTD25 MLG0603P47NHTD25 MLG0603P47NJTD25 MLG0603P51NHTD25 MLG0603P51NJTD25 MLG0603P56NHTD25 MLG0603P56NJTD25 MLG0603P62NHTD25 MLG0603P62NJTD25 MLG0603P68NHTD25 MLG0603P68NJTD25 MLG0603P75NHTD25 MLG0603P75NJTD25 MLG0603P82NHTD25 MLG0603P82NJTD25 MLG0603P91NHTD25 MLG0603P91NJTD25 MLG0603PR10HTD25 MLG0603PR10JTD25 MLG0603PR11HTD25 MLG0603PR11JTD25 MLG0603PR12HTD25 MLG0603PR12JTD25 (GHz)typ. 3.5 3.3 3.3 2.9 2.9 2.9 2.9 2.7 2.7 2.3 2.3 2.4 2.4 2.2 2.2 2.2 2.2 2.0 2.0 2.0 2.0 1.9 1.9 1.8 1.8 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.3 1.3 1.3 1.3 1.1 1.1 1.0 1.0 (: )typ. 1.04 1.33 1.33 1.31 1.31 1.17 1.17 1.45 1.45 1.37 1.37 1.55 1.55 1.49 1.49 1.72 1.72 1.61 1.61 2.18 2.18 1.87 1.87 2.35 2.35 2.12 2.12 2.69 2.69 2.59 2.59 2.71 2.71 2.92 2.92 3.20 3.20 3.50 3.50 3.79 3.79 Please contact us for information on inductance tolerance, G (±2%). ・Short bar residual inductance =0.43nH ○ Measurement equipment Measurement item Product No. L, Q 4291B+16197A Self-resonant frequency 8720C DC resistance Type-7561 ＊ Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Agilent Technologies Yokogawa Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (10/16) I N D U C T O R S MLG0603P Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 0.6 0.6 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.4 1.5 1.5 1.5 1.6 1.6 1.6 1.7 1.7 1.7 1.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.3 2.4 2.4 2.4 Please 800MHz 0.6 0.6 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.4 1.5 1.5 1.5 1.6 1.6 1.6 1.7 1.7 1.7 1.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.3 2.4 2.4 2.4 1.8GHz 0.6 0.6 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.4 1.5 1.5 1.5 1.6 1.6 1.6 1.7 1.7 1.7 1.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.3 2.4 2.4 2.4 2.0GHz 0.6 0.6 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.4 1.5 1.5 1.5 1.6 1.6 1.6 1.7 1.7 1.7 1.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.4 2.4 2.4 2.4 2.4 2.4 2.4GHz 0.6 0.6 0.7 0.7 0.4 0.4 0.9 0.9 1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.4 1.5 1.5 1.5 1.6 1.6 1.6 1.7 1.7 1.7 1.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 2.1 2.1 2.1 2.3 2.3 2.3 2.4 2.4 2.4 2.4 2.4 2.4 Q typ. 500MHz 16min. 16min. 16min. 16min. 16 16 17 17 16 16 16 17 17 17 18 18 18 17 17 17 18 18 18 17 17 17 17 17 17 17 17 17 17 17 17 18 18 18 19 19 19 18 18 18 18 18 18 18 18 18 16 16 16 Part No. 800MHz 22min. 22min. 22min. 22min. 22 22 22 22 21 21 21 23 23 23 24 24 24 22 22 22 23 23 23 22 22 22 22 22 22 22 22 22 22 22 22 24 24 24 23 23 23 23 23 23 23 23 23 22 22 22 21 21 21 1.8GHz 35min. 35min. 35min. 35min. 35 35 35 35 33 33 33 36 36 36 38 38 38 34 34 34 36 36 36 33 33 33 33 33 33 33 33 33 34 34 34 36 36 36 35 35 35 34 34 34 35 35 35 33 33 33 31 31 31 2.0GHz 37min. 37min. 37min. 37min. 37 37 37 37 36 36 36 38 38 38 40 40 40 36 36 36 39 39 39 35 35 35 35 35 35 35 35 35 35 35 35 38 38 38 37 37 37 36 36 36 36 36 36 35 35 35 33 33 33 2.4GHz 41min. 41min. 41min. 41min. 41 41 41 41 40 40 40 43 43 43 45 45 45 40 40 40 43 43 43 39 39 39 38 38 38 39 39 39 39 39 39 42 42 42 41 41 41 39 39 39 40 40 40 38 38 38 36 36 36 MLG0603P0N6BTD25 MLG0603P0N6CTD25 MLG0603P0N7BTD25 MLG0603P0N7CTD25 MLG0603P0N8BTD25 MLG0603P0N8CTD25 MLG0603P0N9BTD25 MLG0603P0N9CTD25 MLG0603P1N0BTD25 MLG0603P1N0CTD25 MLG0603P1N0STD25 MLG0603P1N1BTD25 MLG0603P1N1CTD25 MLG0603P1N1STD25 MLG0603P1N2BTD25 MLG0603P1N2CTD25 MLG0603P1N2STD25 MLG0603P1N3BTD25 MLG0603P1N3CTD25 MLG0603P1N3STD25 MLG0603P1N4BTD25 MLG0603P1N4CTD25 MLG0603P1N4STD25 MLG0603P1N5BTD25 MLG0603P1N5CTD25 MLG0603P1N5STD25 MLG0603P1N6BTD25 MLG0603P1N6CTD25 MLG0603P1N6STD25 MLG0603P1N7BTD25 MLG0603P1N7CTD25 MLG0603P1N7STD25 MLG0603P1N8BTD25 MLG0603P1N8CTD25 MLG0603P1N8STD25 MLG0603P1N9BTD25 MLG0603P1N9CTD25 MLG0603P1N9STD25 MLG0603P2N0BTD25 MLG0603P2N0CTD25 MLG0603P2N0STD25 MLG0603P2N1BTD25 MLG0603P2N1CTD25 MLG0603P2N1STD25 MLG0603P2N2BTD25 MLG0603P2N2CTD25 MLG0603P2N2STD25 MLG0603P2N3BTD25 MLG0603P2N3CTD25 MLG0603P2N3STD25 MLG0603P2N4BTD25 MLG0603P2N4CTD25 MLG0603P2N4STD25 contact us for information on inductance tolerance, G (±2%). ○ Measurement equipment Product No. Manufacturer 4291B+16197A Agilent Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (11/16) I N D U C T O R S MLG0603P Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 2.5 2.5 2.5 2.6 2.6 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.9 2.9 2.9 3.0 3.0 3.0 3.1 3.1 3.1 3.2 3.2 3.2 3.3 3.3 3.3 3.4 3.4 3.4 3.5 3.5 3.5 3.6 3.6 3.6 3.7 3.7 3.7 3.8 3.8 3.8 3.9 3.9 3.9 4.0 4.0 4.0 4.1 4.1 4.1 4.2 Please 800MHz 2.5 2.5 2.5 2.6 2.6 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.9 2.9 2.9 3.0 3.0 3.0 3.1 3.1 3.1 3.2 3.2 3.2 3.3 3.3 3.3 3.4 3.4 3.4 3.5 3.5 3.5 3.6 3.6 3.6 3.7 3.7 3.7 3.8 3.8 3.8 3.9 3.9 3.9 4.0 4.0 4.0 4.1 4.1 4.1 4.2 1.8GHz 2.5 2.5 2.5 2.6 2.6 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.9 2.9 2.9 3.0 3.0 3.0 3.1 3.1 3.1 3.2 3.2 3.2 3.4 3.4 3.4 3.5 3.5 3.5 3.6 3.6 3.6 3.7 3.7 3.7 3.8 3.8 3.8 3.9 3.9 3.9 4.0 4.0 4.0 4.1 4.1 4.1 4.3 4.3 4.3 4.4 2.0GHz 2.5 2.5 2.5 2.6 2.6 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.9 2.9 2.9 3.1 3.1 3.1 3.2 3.2 3.2 3.3 3.3 3.3 3.4 3.4 3.4 3.5 3.5 3.5 3.6 3.6 3.6 3.7 3.7 3.7 3.9 3.9 3.9 4.0 4.0 4.0 4.1 4.1 4.1 4.2 4.2 4.2 4.3 4.3 4.3 4.5 2.4GHz 2.5 2.5 2.5 2.6 2.6 2.6 2.7 2.7 2.7 2.9 2.9 2.9 3.0 3.0 3.0 3.1 3.1 3.1 3.2 3.2 3.2 3.3 3.3 3.3 3.4 3.4 3.4 3.6 3.6 3.6 3.7 3.7 3.7 3.8 3.8 3.8 4.0 4.0 4.0 4.1 4.1 4.1 4.2 4.2 4.2 4.4 4.4 4.4 4.5 4.5 4.5 4.6 Q typ. 500MHz 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 17 17 17 17 17 17 18 18 18 18 18 18 18 Part No. 800MHz 22 22 22 22 22 22 21 21 21 22 22 22 22 22 22 21 21 21 22 22 22 22 22 22 22 22 22 23 23 23 23 23 23 22 22 22 23 23 23 22 22 22 22 22 22 22 22 22 22 22 22 22 1.8GHz 33 33 33 33 33 33 33 33 33 34 34 34 34 34 34 32 32 32 33 33 33 34 34 34 33 33 33 34 34 34 34 34 34 33 33 33 34 34 34 32 32 32 32 32 32 32 32 32 33 33 33 32 2.0GHz 34 34 34 35 35 35 35 35 35 36 36 36 35 35 35 34 34 34 34 34 34 35 35 35 35 35 35 35 35 35 35 35 35 34 34 34 35 35 35 33 33 33 34 34 34 33 33 33 34 34 34 33 2.4GHz 38 38 38 38 38 38 38 38 38 40 40 40 39 39 39 37 37 37 37 37 37 38 38 38 38 38 38 38 38 38 38 38 38 37 37 37 37 37 37 36 36 36 36 36 36 36 36 36 36 36 36 35 MLG0603P2N5BTD25 MLG0603P2N5CTD25 MLG0603P2N5STD25 MLG0603P2N6BTD25 MLG0603P2N6CTD25 MLG0603P2N6STD25 MLG0603P2N7BTD25 MLG0603P2N7CTD25 MLG0603P2N7STD25 MLG0603P2N8BTD25 MLG0603P2N8CTD25 MLG0603P2N8STD25 MLG0603P2N9BTD25 MLG0603P2N9CTD25 MLG0603P2N9STD25 MLG0603P3N0BTD25 MLG0603P3N0CTD25 MLG0603P3N0STD25 MLG0603P3N1BTD25 MLG0603P3N1CTD25 MLG0603P3N1STD25 MLG0603P3N2BTD25 MLG0603P3N2CTD25 MLG0603P3N2STD25 MLG0603P3N3BTD25 MLG0603P3N3CTD25 MLG0603P3N3STD25 MLG0603P3N4BTD25 MLG0603P3N4CTD25 MLG0603P3N4STD25 MLG0603P3N5BTD25 MLG0603P3N5CTD25 MLG0603P3N5STD25 MLG0603P3N6BTD25 MLG0603P3N6CTD25 MLG0603P3N6STD25 MLG0603P3N7BTD25 MLG0603P3N7CTD25 MLG0603P3N7STD25 MLG0603P3N8BTD25 MLG0603P3N8CTD25 MLG0603P3N8STD25 MLG0603P3N9BTD25 MLG0603P3N9CTD25 MLG0603P3N9STD25 MLG0603P4N0BTD25 MLG0603P4N0CTD25 MLG0603P4N0STD25 MLG0603P4N1BTD25 MLG0603P4N1CTD25 MLG0603P4N1STD25 MLG0603P4N2BTD25 contact us for information on inductance tolerance, G (±2%). ○ Measurement equipment Product No. Manufacturer 4291B+16197A Agilent Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (12/16) I N D U C T O R S MLG0603P Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 4.2 4.2 4.3 4.3 4.7 4.7 5.1 5.1 5.6 5.6 6.2 6.2 6.8 6.8 7.5 7.5 8.2 8.2 9.1 9.1 10 10 11 11 12 12 13 13 15 15 16 16 18 18 20 20 22 22 24 24 27 27 30 30 33 33 37 37 40 40 44 44 Please 800MHz 4.2 4.2 4.3 4.3 4.7 4.7 5.1 5.1 5.6 5.6 6.2 6.2 6.8 6.8 7.5 7.5 8.2 8.2 9.1 9.1 10 10 11 11 12 12 13 13 15 15 16 16 18 18 21 21 23 23 25 25 28 28 32 32 36 36 39 39 43 43 48 48 1.8GHz 4.4 4.4 4.5 4.5 4.9 4.9 5.3 5.3 6.1 6.1 6.5 6.5 7.3 7.3 8.1 8.1 9.0 9.0 10.0 10.0 11 11 13 13 14 14 15 15 18 18 20 20 23 23 27 27 34 34 36 36 45 45 59 59 68 68 2.0GHz 4.5 4.5 4.5 4.5 5.0 5.0 5.4 5.4 6.2 6.2 6.7 6.7 7.5 7.5 8.3 8.3 9.3 9.3 10.3 10.3 12 12 13 13 15 15 16 16 20 20 22 22 26 26 31 31 40 40 43 43 57 57 2.4GHz 4.6 4.6 4.7 4.7 5.1 5.1 5.7 5.7 6.6 6.6 7.0 7.0 8.0 8.0 8.8 8.8 10.0 10.0 11.1 11.1 13 13 15 15 17 17 19 19 24 24 27 27 33 33 42 42 68 68 72 72 Q typ. 500MHz 18 18 17 17 16 16 16 16 18 18 16 16 16 16 16 16 17 17 17 17 16 16 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 19 19 18 18 18 18 15 15 16 16 15 15 15 15 Part No. 800MHz 22 22 21 21 21 21 21 21 22 22 21 21 21 21 21 21 21 21 21 21 21 21 23 23 22 22 22 22 22 22 22 22 22 22 22 22 21 21 22 22 21 21 21 21 17 17 17 17 17 17 16 16 1.8GHz 32 32 32 32 31 31 31 31 31 31 30 30 29 29 30 30 30 30 30 30 28 28 30 30 28 28 28 28 27 27 26 26 25 25 23 23 21 21 21 21 18 18 15 15 11 11 2.0GHz 33 33 33 33 32 32 32 32 32 32 31 31 30 30 30 30 30 30 31 31 28 28 30 30 28 28 28 28 26 26 25 25 24 24 22 22 18 18 18 18 15 15 2.4GHz 35 35 35 35 34 34 34 34 32 32 33 33 31 31 32 32 31 31 32 32 28 28 30 30 27 27 26 26 24 24 22 22 20 20 17 17 11 11 11 11 MLG0603P4N2CTD25 MLG0603P4N2STD25 MLG0603P4N3STD25 MLG0603P4N3JTD25 MLG0603P4N7STD25 MLG0603P4N7JTD25 MLG0603P5N1STD25 MLG0603P5N1JTD25 MLG0603P5N6STD25 MLG0603P5N6JTD25 MLG0603P6N2STD25 MLG0603P6N2JTD25 MLG0603P6N8HTD25 MLG0603P6N8JTD25 MLG0603P7N5HTD25 MLG0603P7N5JTD25 MLG0603P8N2HTD25 MLG0603P8N2JTD25 MLG0603P9N1HTD25 MLG0603P9N1JTD25 MLG0603P10NHTD25 MLG0603P10NJTD25 MLG0603P11NHTD25 MLG0603P11NJTD25 MLG0603P12NHTD25 MLG0603P12NJTD25 MLG0603P13NHTD25 MLG0603P13NJTD25 MLG0603P15NHTD25 MLG0603P15NJTD25 MLG0603P16NHTD25 MLG0603P16NJTD25 MLG0603P18NHTD25 MLG0603P18NJTD25 MLG0603P20NHTD25 MLG0603P20NJTD25 MLG0603P22NHTD25 MLG0603P22NJTD25 MLG0603P24NHTD25 MLG0603P24NJTD25 MLG0603P27NHTD25 MLG0603P27NJTD25 MLG0603P30NHTD25 MLG0603P30NJTD25 MLG0603P33NHTD25 MLG0603P33NJTD25 MLG0603P36NHTD25 MLG0603P36NJTD25 MLG0603P39NHTD25 MLG0603P39NJTD25 MLG0603P43NHTD25 MLG0603P43NJTD25 contact us for information on inductance tolerance, G (±2%). ○ Measurement equipment Product No. Manufacturer 4291B+16197A Agilent Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (13/16) I N D U C T O R S MLG0603P Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 48 48 53 53 58 58 65 65 71 71 79 79 87 87 99 99 110 110 126 126 151 151 Please 800MHz 53 53 59 59 66 66 76 76 82 82 97 97 109 109 132 132 152 152 211 211 1.8GHz 2.0GHz 2.4GHz Q typ. 500MHz 15 15 15 15 15 15 15 15 15 15 14 14 14 14 13 13 14 14 13 13 12 12 Part No. 800MHz 16 16 16 16 15 15 15 15 15 15 13 13 13 13 12 12 12 12 9 9 1.8GHz 2.0GHz 2.4GHz MLG0603P47NHTD25 MLG0603P47NJTD25 MLG0603P51NHTD25 MLG0603P51NJTD25 MLG0603P56NHTD25 MLG0603P56NJTD25 MLG0603P62NHTD25 MLG0603P62NJTD25 MLG0603P68NHTD25 MLG0603P68NJTD25 MLG0603P75NHTD25 MLG0603P75NJTD25 MLG0603P82NHTD25 MLG0603P82NJTD25 MLG0603P91NHTD25 MLG0603P91NJTD25 MLG0603PR10HTD25 MLG0603PR10JTD25 MLG0603PR11HTD25 MLG0603PR11JTD25 MLG0603PR12HTD25 MLG0603PR12JTD25 contact us for information on inductance tolerance, G (±2%). ○ Measurement equipment Product No. Manufacturer 4291B+16197A Agilent Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (14/16) I N D U C T O R S MLG0603P Type ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 1000 R10 R12 82N 68N 56N 47N39N 33N 27N 22N 100 18N 15N Inductance(nH) 12N 10N 8N2 10 6N8 5N6 4N7 3N9 3N3 2N7 2N2 1N8 1N5 1N2 1 1N0 0 10 100 1000 10000 Frequency(MHz) ○ Measurement equipment Product No. Manufacturer E4991A+16197A Agilent Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (15/16) I N D U C T O R S MLG0603P Type ELECTRICAL CHARACTERISTICS Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 50 1N2 1N0 1N5 1N8 2N7 3N3 40 2N2 3N9 4N7 5N6 30 6N8 Q 8N2 10N 12N 20 15N 18N 10 56N 82N 47N 39N 68N 33N 22N R12 0 10 R10 27N 100 1000 10000 Frequency(MHz) ○ Measurement equipment Product No. Manufacturer E4991A+16197A Agilent Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm (16/16) I N D U C T O R S MLG0603P Type PACKAGING STYLE REEL DIMENSIONS ø60min. 1.0 2.0±0.5 8.4 +2.0 –0.0 ø13±0.2 14.4max. ø21±0.8 ø180±2.0 Dimensions in mm Cavity 3.5±0.05 1.5 +0.1 –0.0 Type MLG0603P A 0.68±0.05 B 0.38±0.05 K 0.5 max. A 8.0±0.3 Sprocket hole 1.75±0.1 TAPE DIMENSIONS K B 4.0±0.1 2.0±0.05 160min. Drawing direction Taping 2.0±0.05 200min. 300min. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150105 / inductor_automotive_high-frequency_mlg0603p_en.fm