CRO5700Z PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Radios • Satellite Communications £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] • Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 5690 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -106 Harmonic Suppression (2nd) -30 Tuning Voltage 0.5 Max Units 5710 MHz dBc/Hz -25 dBc 4.5 Vdc MHz/V 30 Tuning Sensitivity (avg.) 6 dBm Input Capacitance 50 pF Pushing .5 MHz/V Pulling (12 dB Return Loss, Any Phase) .5 MHz 85 °C Max Units Power Output 2 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) 4 VCO-24H Min Typ 5 140 Vdc 168 mA Additional Notes Fundamental Rejection: -35dBc LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CRO5700Z Rev A1 Tuning Curve, typ. 5750 FREQUENCY (MHz) 5730 5710 5690 85 °C 25 °C 5670 5650 -40 °C 5630 5610 5590 5570 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 8 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 7 6 0.030 MIN. CUTBACK FROM LIVE PADS 5 4 3 2 1 0 5595 5610 5624 5638 5652 5667 5683 5700 5717 5734 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions 24 23 22 21 20 PIN CONFIGURATION 2 3 4 5 6 7 19 Z-COMM XXXXXXXX-LF W/O# D/C 1 8 18 17 16 15 P1 P2-12 P13 P14-16 P17 P18-24 RF OUTPUT GROUND Vcc GROUND Vtune GROUND 14 13 9 10 11 12 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B