V626ME03-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Radios • Earthstations • Satellite Modems £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2200 Typ Max Units 2500 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -95 dBc/Hz Harmonic Suppression (2nd) -10 dBc Tuning Voltage 0.5 14 MHz/V 45 Tuning Sensitivity (avg.) 11 dBm Input Capacitance 50 pF Pushing 4 MHz/V Pulling (14 dB Return Loss, Any Phase) 11 MHz 85 °C Max Units Power Output 6 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 8.5 Vdc MINI-14H Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 22 Vdc 27 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V626ME03-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 2730 2690 2650 2610 2570 2530 2490 2450 2410 2370 2330 2290 2250 2210 2170 2130 2090 2050 2010 1970 85 °C 25 °C -40 °C 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 12 11 10 9 0.030 MIN. CUTBACK FROM LIVE PADS 8 7 6 5 1989 2102 2187 2260 2328 2395 2463 2534 2604 2675 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14H 0.220 MINI-14H-LOW 0.160 MINI-14H-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B