PCA0174A-LF Rev A1 Programmable Phase Locked Loop Surface Mount Module Applications Application Notes • Telecommunications • Satellite • • AN-107: Manual Soldering Technique • AN-202: Programming Z-COMM PLLs Performance Specifications Min Frequency 159 Typ Max Units 189 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -100 dBc/Hz Harmonic Suppression (2nd) -13 dBc Spurious Suppression -70 dBc Power Output 0 2 4 dBm Load Impedance 50 Step Size 100 kHz Phase Detector Frequency 100 kHz 3 mS Settling Time Charge Pump Output Current Operating Temperature Range 2500 -40 Package Style 85 °C Max Units CPLL Power Supply Requirements Min Typ Supply Voltage 1: PLL (Vcc, nom) 5 Vdc Supply Voltage 2: VCO (Vcc, nom) N/A Vdc Supply Current 1: PLL (Icc, typ) 40 mA Supply Current 2: VCO (Icc, typ) N/A mA Reference Oscillator Signal Min Frequency Phase Noise @1 kHz Offset Typ Max Units 10 MHz -145 dBc/Hz Additional Notes Phase Locked Loop Internal IC: Analog Devices / ADF4001 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. 14118 Stowe Drive, Suite B | Poway, CA 92064 | TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com | EMAIL: [email protected] Page 1 of 2 FRM-S-002 B PCA0174A-LF Rev A1 Programmable Phase Locked Loop Surface Mount Module Phase Noise, typ. Footprint PHASE NOISE (1 Hz BW, typical) RECOMMENDED FOOTPRINT £(f) (dBc/Hz) SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 0.030 MIN. CUTBACK FROM LIVE PADS OFFSET (Hz) Physical Dimensions 12 11 10 1 2 3 Z-COMM XXXXXXXX-LF W/O# D/C PIN CONFIGURATION 4 5 9 8 7 1 2 3 4 5 6 7 8 9 REST RF OUT REF IN CLOCK DATA ENABLE LOCK DETECT Vcc OPTIONAL N/C GROUND 6 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0. 010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. URL: www.zcomm.com | EMAIL: [email protected] Page 2 of 2 FRM-S-002 B