PCA1550A-LF - Z-Communications, Inc.

PCA1550A-LF
Rev A1
Programmable Phase Locked Loop
Surface Mount Module
Applications
Application Notes
• Satellite Communication Systems
• Point-to-Point Microwave Radio
•
• AN-107: Manual Soldering Technique
• AN-202: Programming Z-COMM PLLs
Performance Specifications
Min
Frequency
1500
Typ
Max
Units
1600
MHz
Phase Noise @ 10 kHz offset (1 Hz BW)
-101
dBc/Hz
Harmonic Suppression (2nd)
-15
dBc
Spurious Suppression
-70
dBc
Power Output
-1
Load Impedance
1.5
4
dBm
50
Step Size
1000
kHz
Phase Detector Frequency
1000
kHz
2
mS
Settling Time
Charge Pump Output Current
Operating Temperature Range
1250
-40
Package Style
85
°C
Max
Units
CPLL
Power Supply Requirements
Min
Typ
Supply Voltage 1: PLL (Vcc, nom)
5
Vdc
Supply Voltage 2: VCO (Vcc, nom)
N/A
Vdc
Supply Current 1: PLL (Icc, typ)
40
mA
Supply Current 2: VCO (Icc, typ)
N/A
mA
Reference Oscillator Signal
Min
Frequency
Phase Noise @1 kHz Offset
Typ
Max
Units
10
MHz
-145
dBc/Hz
Additional Notes
Phase Locked Loop Internal IC: Analog Devices / ADF4113
LFSuffix = RoHS Compliant. All specifications are subject to change without notice.
© Z-Communications, Inc. All Rights Reserved.
14118 Stowe Drive, Suite B | Poway, CA 92064 | TEL: (858) 621-2700 | FAX: (858) 486-1927
URL: www.zcomm.com | EMAIL: [email protected]
Page 1 of 2
FRM-S-002 B
PCA1550A-LF
Rev A1
Programmable Phase Locked Loop
Surface Mount Module
Phase Noise, typ.
Footprint
PHASE NOISE (1 Hz BW, typical)
RECOMMENDED FOOTPRINT
£(f) (dBc/Hz)
SEVERAL HOLES OF O 0.015 ON
GND. PLANE ARE RECOMMENDED
FOR GOOD GROUNDING.
0.030 MIN. CUTBACK
FROM LIVE PADS
OFFSET (Hz)
Physical Dimensions
12
11
10
1
2
3
Z-COMM
XXXXXXXX-LF
W/O#
D/C
PIN CONFIGURATION
4
5
9
8
7
1
2
3
4
5
6
7
8
9
REST
RF OUT
REF IN
CLOCK
DATA
ENABLE
LOCK DETECT
Vcc
OPTIONAL
N/C
GROUND
6
NOTE: ALL DIMENSIONS ARE IN INCHES
TOL: XXX: +/- 0. 010
LFSuffix = RoHS Compliant. All specifications are subject to change without notice.
© Z-Communications, Inc. All Rights Reserved.
URL: www.zcomm.com | EMAIL: [email protected]
Page 2 of 2
FRM-S-002 B