Formosa MS Bridge Rectifier GBJ4A THRU GBJ4M List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings ............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Tube packing ................................................................................... 4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date Revised Date DS-242126 2008/02/10 2013/06/10 Revision Page. C 6 Formosa MS Bridge Rectifier GBJ4A THRU GBJ4M 4.0A Glass Passivated Single Phase Bridge Rectifiers - 50 - 1000V Package outline Features 4GBJ • Surge overload rating -120 amperes peak . • Ideal for printed circuit board. • High forward surge current capability. • Reliable low cost construction utilizing molded plastic technique. • Lead-free parts meet RoHS requirments. • UL recognized file # E321971 • Suffix "-H" indicates Halogen free parts, ex. GΒJ4A-H. Mechanical data • Epoxy:UL94-V0 rated flame retardant • Case : Molded plastic, 4GBJ • Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 Dimensions in inches and (millimeters) • Polarity : marked on body • Mounting Position : Any • Weight : Approximated 4.265 gram Maximum ratings and Electrical Characteristics (AT PARAMETER T A=25 oC unless otherwise noted) CONDITIONS SYMBOL MIN. TYP. MAX. UNIT Maximum average forward rectified current with heatsink Note 1 @T C=100°C without heatsink I F(AV) 4.0 2.4 A Forward surge current 8.3ms single half sine-wave superimposed on rate load (JEDEC methode) I FSM 120 A V R = V RRM T J = 25 OC Reverse current O V R = V RRM T J = 125 C 10.0 IR Rating for fusing t < 8.3 ms I 2t Typical Junction capacitance Per Element Measured at 1.0MHz and applied reverse voltage of 4.0V DC CJ 45 Typical thermal resistance Junction to case R θJC 2.2 Storage temperature T STG µA 500 A 2s 60 pF O C/W O +175 -65 C Note : 1.Device mounted on 50mm*50mm*1.6mm Cu plate heatsink. *1 V RRM V RMS*2 *3 VR *4 VF (V) (V) (V) (V) GBJ4A 50 35 50 SYMBOLS GBJ4B 100 70 100 GBJ4D 200 140 200 GBJ4G 400 280 400 GBJ4J 600 420 600 GBJ4K 800 560 800 GBJ4M 1000 700 1000 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Operating temperature T J, ( OC) *1 Repetitive peak reverse voltage *2 RMS voltage *3 Continuous reverse voltage 1.10 -55 to +150 *4 Maximum forward voltage @I F=4.0Adc Page 2 Document ID Issued Date Revised Date DS-242126 2008/02/10 2013/06/10 Revision Page. C 6 PEAK FORWARD SURGE CURRENT(A) AVERAGE FORWARD CURRENT,(A) Rating and characteristic curves (GBJ4A THRU GBJ4M) FIG.1-OUTPUT RECTIFIED CURRENT DERATING CURVE FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 25°C NUMBER OF CYCLES AT 60 HZ CASE TEMPERATURE, (°C) FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT (uA) INSTANTANEOUS FORWARD CURRENT (A) FIG. 3 - TYPICAL INSTANTANEOUR FORWARD CHARACTERISTICS °C °C INSTANTANEOUS FORWARD VOLTAGE (VOLTS) °C °C °C PERCENT OF RATED PEAK REVERSE VOLTAGE(%) FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE (pF) °C 25° REVERSE VOLTAGE, VR (VOLTS) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 3 Document ID Issued Date Revised Date DS-242126 2008/02/10 2013/06/10 Revision Page. C 6 Formosa MS Bridge Rectifier GBJ4A THRU GBJ4M Pinning information Simplified outline Symbol ~ + – ~ Marking Type number Marking code GBJ4A GBJ4B GBJ4D GBJ4G GBJ4J GBJ4K GBJ4M GBJ4A GBJ4B GBJ4D GBJ4G GBJ4J GBJ4K GBJ4M Tube packing PACKAGE TUBE (pcs) TUBE SIZE (m/m) 4GBJ 20 530*42.0*7.6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 CARTON SIZE (m/m) 548*226*100 CARTON (pcs) 1,000 Page 4 APPROX. GROSS WEIGHT (kg) 7.1 Document ID Issued Date Revised Date DS-242126 2008/02/10 2013/06/10 Revision Page. C 6 Formosa MS Bridge Rectifier GBJ4A THRU GBJ4M Suggested thermal profiles for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 Preheat Max gradient 2ºC/s 0 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 5 Document ID Issued Date Revised Date DS-242126 2008/02/10 2013/06/10 Revision Page. C 6 Formosa MS Bridge Rectifier GBJ4A THRU GBJ4M High reliability test capabilities Item Test Conditions Reference O 1. Solder Resistance at 260 ± 5 C for 10 ± 2sec. immerse body into solder 1/16"±1/32" MIL-STD-750D METHOD-2031 2. Solderability at 245±5 OC for 5 sec. MIL-STD-202F METHOD-208 3. High Temperature Reverse Bias V R=80% rate at T J=150 OC for 168 hrs. MIL-STD-750D METHOD-1038 4. Forward Operation Life Rated average rectifier current at T A=25 OC for 500hrs. MIL-STD-750D METHOD-1027 T A = 25 OC, I F = I O On state: power on for 5 min. off state: power off for 5 min. on and off for 500 cycles. MIL-STD-750D METHOD-1036 5. Intermittent Operation Life 6. Pressure Cooker JESD22-A102 15P SIG at T A=121 OC for 4 hrs. 7. Temperature Cycling -55 OC to +125 OC dwelled for 30 min. and transferred for 5min. total 10 cycles. 8. Thermal Shock 0 OC for 5 min. rise to 100 OC for 5 min. total 10 cycles. MIL-STD-750D METHOD-1056 9. Forward Surge 8.3ms single half sine-wave superimposed on rated load, one surge. MIL-STD-750D METHOD-4066-2 10. Humidity at T A=85 OC, RH=85% for 1000hrs. MIL-STD-750D METHOD-1021 11. High Temperature Storage Life at 175 OC for 1000 hrs. MIL-STD-750D METHOD-1031 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 6 MIL-STD-750D METHOD-1051 Document ID Issued Date Revised Date DS-242126 2008/02/10 2013/06/10 Revision Page. C 6