Formosa MS Bridge Rectifier KBU10005 THRU KBU1010 List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings ............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 T ube packing & Bulk packing ..............................................................4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date Revised Date Revision DS-242151 2009/08/10 2010/03/10 B Page. 6 Formosa MS Bridge Rectifier KBU10005 THRU KBU1010 10.0A Plastic Passivated Single-Phase Bridge Rectifiers-50-1000V Package outline Features • Surge overload rating 240 amperes peak . • Ideal for printed circuit board • Reliable low cost construction utilizing • • • • KBU molded plastic technique Plastic Passivated chip junctions. Lead-free parts meet RoHS requirments. UL recognized file # E321971 Suffix "-H" indicates Halogen-free part, ex.KBU10005-H. .160(4.1) .140(3.6) .935(23.70) .895(22.70) .780(19.8) .740(18.8) .70(17.8) .66(16.8) - Mechanical data ~ ~ + .085(2.2) .065(1.7) 1.0(25.4) Min. .052(1.3) .048(1.2) • Epoxy:UL94-V0 rated flame retardant • Case : Molded plastic, KBU • Terminals : Solder plated, solderable per .22(5.6) .18(4.6) MIL-STD-750, Method 2026 .24(6.09) .20(5.08) .276(7.0) .256(6.5) .205(5.2) .185(4.7) • Polarity : marked on body • Mounting Position : Any • Weight : Approximated 8.00 gram Dimensions in inches and (millimeters) Maximum ratings and Electrical Characteristics (AT PARAMETER o T A=25 C unless otherwise noted) CONDITIONS Forward rectified current See Fig.2 Forward surge current 8.3ms single half sine-wave (JEDEC methode) MAX. UNIT IO 10.0 A I FSM 240 A Symbol MIN. TYP. O V R = V RRM T J = 25 C Reverse current O V R = V RRM T J = 100 C I 2t Rating for fusing Storage temperature T STG *1 V RRM (V) V RMS*2 (V) *3 VR (V) KBU10005 50 35 50 KBU1001 100 70 100 KBU1002 200 140 200 KBU1004 400 280 400 KBU1006 600 420 600 KBU1008 800 560 800 KBU1010 1000 700 1000 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 1000 I 2t t < 8.3 ms SYMBOLS 10 IR *4 VF (V) Operating temperature T J, ( OC) 239 +175 -65 uA A 2s O C *1 Repetitive peak reverse voltage *2 RMS voltage *3 Continuous reverse voltage 1.0 -55 to +125 *4 Maximum forward voltage @ I F =5.0A Page 2 Document ID Issued Date Revised Date Revision DS-242151 2009/08/10 2010/03/10 B Page. 6 Rating and characteristic curves (KBU10005 THRU KBU1010) FIG.1-MAXIMUM FORWARD SURGE CURRENT FIG. 2 – DERATING CURVE OUTPUT RECTIFIED CURRENT AVERAGE FORWARD OUTPUT CURRENT AMPERES PEAK FORWARD SURGE CURRENT AMPERES 400 350 300 250 200 TJ=25°C 150 100 50 0 10 1 20 HEAT SINK MOUNTING 15 10 5 Device mounted on 100mm*100mm*1.6mm Cu plate heatsink. 0 100 50 100 150 CASE TEMPERATURE (℃) NUMBER OF CYCLETS AT 60Hz FIG.3– TYPICAL FORWARD CHARACTERISTICS FIG.4– TYPICAL REVERSE CHARACTERISTICS 100 10 1.0 TJ=25℃ PULSE WIDTH=300us 1%DUTY CYCLE 0.1 0.01 0.4 INSTANTANEOUS REVERSE CURRENT MICROAMPERES INSTANTANEOUS FORWARD CURRENT (AMPERES) 10 1.0 TJ = 25°C 0.1 0.01 0.6 0.8 1.0 1.2 0 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE Page 3 Document ID Issued Date Revised Date Revision DS-242151 2009/08/10 2010/03/10 B Page. 6 Formosa MS Bridge Rectifier KBU10005 THRU KBU1010 Pinning information Simplified outline - AC Symbol + + ~ ~ - Marking Type number Marking code KBU10005 KBU1001 KBU1002 KBU1004 KBU1006 KBU1008 KBU1010 KBU10005 KBU1001 KBU1002 KBU1004 KBU1006 KBU1008 KBU1010 Tube packing PACKAGE KBU TUBE (pcs) TUBE SIZE (m/m) BOX (pcs) 20 488*55.2*9.5 400 INNER BOX (m/m) 510*110*125 CARTON SIZE (m/m) 530*240*285 CARTON (pcs) APPROX. GROSS WEIGHT (kg) 1,600 19.5 Bulk packing PACKAGE KBU BOX (pcs) INNER BOX (m/m) 400 230*230*49 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 CARTON SIZE (m/m) 485*240*172 CARTON (pcs) APPROX. GROSS WEIGHT (kg) 2,400 18.6 Page 4 Document ID Issued Date Revised Date Revision DS-242151 2009/08/10 2010/03/10 B Page. 6 Formosa MS Bridge Rectifier KBU10005 THRU KBU1010 Suggested thermal profiles for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 Preheat Max gradient 2ºC/s 0 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 5 Document ID Issued Date Revised Date Revision DS-242151 2009/08/10 2010/03/10 B Page. 6 Formosa MS Bridge Rectifier KBU10005 THRU KBU1010 High reliability test capabilities Item Test Conditions Reference O MIL-STD-750D METHOD-2031 O MIL-STD-202F METHOD-208 1. Solder Resistance at 260 ± 5 C for 10 ± 2sec. immerse body into solder 1/16" ± 1/32" 2. Solderability at 245 ± 5 C for 5 sec. 3. High Temperature Reverse Bias V R=80% rate at T J=125 C for 168 hrs. 4. Forward Operation Life Rated average rectifier current at T A=25 C for 500hrs. MIL-STD-750D METHOD-1038 O MIL-STD-750D METHOD-1027 O O 5. Intermittent Operation Life 6. Pressure Cooker T A = 25 C, I F = I O On state: power on for 5 min. off state: power off for 5 min. on and off for 500 cycles. 8. Forward Surge JESD22-A102 O 15P SIG at T A=121 C for 4 hrs. O 7. Temperature Cycling MIL-STD-750D METHOD-1036 O -55 C to +125 C dwelled for 30 min. and transferred for 5min. total 10 cycles. MIL-STD-750D METHOD-1051 8.3ms single half sine-wave, one surge. MIL-STD-750D METHOD-4066-2 O 9. Humidity at T A=85 C , RH=85% for 1000hrs. 10. High Temperature Storage Life at 175 C for 1000 hrs. http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 MIL-STD-750D METHOD-1021 O Page 6 MIL-STD-750D METHOD-1031 Document ID Issued Date Revised Date Revision DS-242151 2009/08/10 2010/03/10 B Page. 6