™ Le88266/286 Dual Channel Wideband Auto Battery Switching (ABS) VoicePort™ - VE880 Series Product Brief Features • Complete BORSCHT Function for Two Channels in a Single VoicePort™ Device • • 127608 Battery Feed, Over-voltage support, integrated Ringing, line Supervision, Codec, Hybrid (2W/4W), Test Integrated high voltage switching regulator controllers • • Wide input voltage range (VSW =+4.75 V to +35 V) - Generates supplies for VBH, VBM & VBL Low power Idle and On-hook transmission states Packing2 Package Type Le88286TQC Le88266TQC Le88266DLC Le88286DLC - • January 2011 Ordering Information Device OPN Integrated Power Management • Version 2 64-pin 64-pin 80-pin 80-pin 1 QFN (Green) Tray Tray QFN (Green)1 1 eLQFP (Green) Tray 1 eLQFP (Green) Tray 1. The green package meets RoHS Directive 2002/95/EC of the European Council to minimize the environmental impact of electrical equipment. 2. For delivery using a tape and reel packing system, add a “T” suffix to the OPN (Ordering Part Number) when placing an order. Worldwide Programmability Applications • • Voice-Enabled Cable and DSL Modems • Residential VoIP Gateways and Routers • Media Terminal Adapters (MTA) Two-wire AC impedance, Balance Impedance, Gain • DC feed voltage and current limit • Ringing frequency, voltage and current limit • 12 kHz and 16 kHz Metering • Programmable loop closure and ring trip thresholds Standalone & Embedded Ringing Fiber to the Premise/Home/Building (FTTP/H/B), Fiber in the Loop (FITL) Optical Network Terminals (ONT) • Wireless Local Loop (WLL), PBX, ISDN NT1/TA • • • 5 REN with pin for pin compatible 100 V (Le88266) and 120 V (Le88286) devices • Up to 110 Vpk internal balanced sinusoidal or trapezoidal ringing with programmable DC offset Powerful Signal Generator • VBL VBM VBH TIPD1 TIPT 1 RINGT1 RINGD1 • Universal Caller ID generation • Up to 4 simultaneous tones • Automatic cadencing feature VoicePath™ API-II Software Available to Implement FXS Functions • • Supports device calibration • Line configuration via VoicePath Profile Wizard VeriVoice™ Test Suite Subscriber Loop Test • • Seamless integration with API-II software • Utilizes integrated self test capabilities • Line fault detection and reporting Pin-Selectable PCM/MPI or GCI interface • G.711 µ-law, A-law, or 16-bit Linear Coding • Wideband 16 kHz Sampling Mode • Integrated 150 mW 3 V Relay Driver • TAC1 RAC1 RTV1 Voice Signal Processing LFC1 RSN1 IHL1 Signaling Control TDC1 RDC1 Supervision Processing Signal Generation Signal Generation RDC2 TDC2 Supervision Processing IHL2 RSN2 LFC2 Signaling Control RTV2 RAC2 TAC2 Voice Signal Processing RINGD2 RINGT2 TIPT 2 TIPD2 High Voltage Line Driver VBL VBM VBH PCLK/DCL PLL High Voltage Line Driver FS/FSC PCM Interface and Time Slot Assigner (PCM) Input / Output Microprocessor Interface (MPI) Switching regulator controllers Analog Reference VREF Small Footprint Package - Exposed pad 64-pin QFN • Minimal External Discrete Components Required TSCA 4 I/O2i - I/O1i DCLK/S0 DIN/S1 DOUT CS/PG INT/S2 RST SWCMPY SWVSY SWISY SWOUTY SWCMPZ SWVSZ SWISZ SWOUTZ XB IREF Figure 1 - VoicePort Device Block Diagram External catch diode required • DXA/DU DRA/DD GCI Interface (GCI) 1 Zarlink Semiconductor Inc. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2010-2011, Zarlink Semiconductor Inc. All Rights Reserved. Le88266/286 Product Brief Description The Zarlink dual channel Le88266/286 Tracking Battery Switching (ABS) VoicePort™ device implements a dualchannel telephone line interface by providing all the necessary voice interface functions from the high voltage subscriber line to the µP/DSP digital interface. The ABS device can operate from external battery supplies, or from supplies generated by the on-chip switching regulator controllers. This device reduces system level cost, space and power. Designers benefit by having a simple, cost effective, low-power and dense, interface design without sacrificing features or functionality. The programmable, feature rich VoicePort device provides a highly functional line interface which meets the requirements of short and medium loop (up to 1500 Ohms total at 1 REN) applications. Features include: high voltage switching regulator, self-test, line test capabilities, integrated ringing (up to 110 Vpk), worldwide software programmability with wideband capability, flexible signal generator with tone cadencing and caller ID generation. These VoicePort device features are crucial for designing cost-effective, fullfeatured Voice over Broadband solutions. Features • Highest level of integration • Smallest footprint • Pin-compatible options • Lowest cost of ownership Benefits • Reduces system BOM and discrete component count • Saves board space • Provides design flexibility to develop one design and populate the voice socket with the right features for a given market—100 V or 120 V, internal balanced (sinusoidal or trapezoidal) • Provides the most cost-effective BOM for 2-channel applications • Offers design flexibility to develop one application for worldwide markets • Highly programmable • Integrated ring cadencing and system state control • Reduces real-time software overhead • Common application programming interface • Significantly reduces development time with VoicePath API-II software • Comprehensive line sensing • Enables high performance GR-909 diagnostics and subscriber loop test and self test support with VeriVoice Test Suite software • Integrated switching regulator • Enables lowest component count and highest efficiency in all states of operation Le88266/286 VoicePort Devices SoC MPI & PCM Highway Pin-compatible options for 100V/120 V ABS Switching Regulator Controller A/D & D/A Tip & Ring Driver Linear/G.711 Internal Balanced & Unbalanced Ringing Voice Signal Processor, Supervision, and Test Functions A/D & D/A 2-Channel FXS 2 Zarlink Semiconductor Inc. Tip & Ring Driver Le88266/286 Product Brief Related Literature • VE8910 Single-Channel Tracking Battery Wideband Chipset Data Sheet* • Ve8820 or Le88276 Dual Channel Tracking Battery Wideband Auto Battery Switching (ABS) VoicePort™ * • Le88266/286 Dual Channel Tracking Battery Wideband Auto Battery Switching (ABS) VoicePort™ Device Data Sheet* • Le71HR8864G - VE880 Series Line Module (Supports 2FXS ABS up to 80 Vpk ringing with a 12 V Flyback Automatic Battery Switching Power Supply *Contact your Zarlink Sales Representative to obtain the data sheets. 3 Zarlink Semiconductor Inc. Le88266/286 Product Brief For more information about all Zarlink products visit our Web Site at www.zarlink.com Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries (collectively “Zarlink”) is believed to be reliable. However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink. This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user’s responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink’s conditions of sale which are available on request. Purchase of Zarlink’s I2C components conveys a license under the Philips I2C Patent rights to use these components in an I2C System, provided that the system conforms to the I2C Standard Specification as defined by Philips. Zarlink, ZL, the Zarlink Semiconductor logo and the Legerity logo and combinations thereof, VoiceEdge, VoicePort, SLAC, ISLIC, ISLAC and VoicePath are trademarks of Zarlink Semiconductor Inc. TECHNICAL DOCUMENTATION - NOT FOR RESALE 4 Zarlink Semiconductor Inc.